| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * (C) Copyright 2007-2010 Michal Simek |
| * |
| * Michal SIMEK <monstr@monstr.eu> |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* Microblaze is microblaze_0 */ |
| #define XILINX_FSL_NUMBER 3 |
| |
| /* uart */ |
| /* The following table includes the supported baudrates */ |
| # define CFG_SYS_BAUDRATE_TABLE \ |
| {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} |
| |
| /* architecture dependent code */ |
| #if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP) |
| #define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) |
| #else |
| #define BOOT_TARGET_DEVICES_PXE(func) |
| #endif |
| |
| #if defined(CONFIG_CMD_DHCP) |
| #define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na) |
| #else |
| #define BOOT_TARGET_DEVICES_DHCP(func) |
| #endif |
| |
| #if defined(CONFIG_SPI_FLASH) |
| # define BOOT_TARGET_DEVICES_QSPI(func) func(QSPI, qspi, na) |
| #else |
| # define BOOT_TARGET_DEVICES_QSPI(func) |
| #endif |
| |
| #if defined(CONFIG_MTD_NOR_FLASH) |
| # define BOOT_TARGET_DEVICES_NOR(func) func(NOR, nor, na) |
| #else |
| # define BOOT_TARGET_DEVICES_NOR(func) |
| #endif |
| |
| #define BOOTENV_DEV_NOR(devtypeu, devtypel, instance) \ |
| "bootcmd_nor=cp.b ${script_offset_nor} ${scriptaddr} ${script_size_f} && " \ |
| "echo NOR: Trying to boot script at ${scriptaddr} && " \ |
| "source ${scriptaddr}; echo NOR: SCRIPT FAILED: continuing...;\0" |
| |
| #define BOOTENV_DEV_NAME_NOR(devtypeu, devtypel, instance) \ |
| "nor " |
| |
| #define BOOTENV_DEV_QSPI(devtypeu, devtypel, instance) \ |
| "bootcmd_qspi=sf probe 0 0 0 && " \ |
| "sf read ${scriptaddr} ${script_offset_f} ${script_size_f} && " \ |
| "echo QSPI: Trying to boot script at ${scriptaddr} && " \ |
| "source ${scriptaddr}; echo QSPI: SCRIPT FAILED: continuing...;\0" |
| |
| #define BOOTENV_DEV_NAME_QSPI(devtypeu, devtypel, instance) \ |
| "qspi " |
| |
| #define BOOT_TARGET_DEVICES_JTAG(func) func(JTAG, jtag, na) |
| |
| #define BOOTENV_DEV_JTAG(devtypeu, devtypel, instance) \ |
| "bootcmd_jtag=echo JTAG: Trying to boot script at ${scriptaddr} && " \ |
| "source ${scriptaddr}; echo JTAG: SCRIPT FAILED: continuing...;\0" |
| |
| #define BOOTENV_DEV_NAME_JTAG(devtypeu, devtypel, instance) \ |
| "jtag " |
| |
| #define BOOT_TARGET_DEVICES(func) \ |
| BOOT_TARGET_DEVICES_JTAG(func) \ |
| BOOT_TARGET_DEVICES_QSPI(func) \ |
| BOOT_TARGET_DEVICES_NOR(func) \ |
| BOOT_TARGET_DEVICES_DHCP(func) \ |
| BOOT_TARGET_DEVICES_PXE(func) |
| |
| #include <config_distro_bootcmd.h> |
| |
| #ifndef CONFIG_EXTRA_ENV_SETTINGS |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "unlock=yes\0"\ |
| "nor0=flash-0\0"\ |
| "mtdparts=mtdparts=flash-0:"\ |
| "256k(u-boot),256k(env),3m(kernel),"\ |
| "1m(romfs),1m(cramfs),-(jffs2)\0"\ |
| "nc=setenv stdout nc;"\ |
| "setenv stdin nc\0" \ |
| "serial=setenv stdout serial;"\ |
| "setenv stdin serial\0"\ |
| "script_size_f=0x40000\0"\ |
| BOOTENV |
| #endif |
| |
| /* SPL part */ |
| |
| #define CFG_SYS_UBOOT_BASE CONFIG_TEXT_BASE |
| |
| #endif /* __CONFIG_H */ |