| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * K3: System Firmware Loader |
| * |
| * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/ |
| * Andreas Dannenberg <dannenberg@ti.com> |
| */ |
| |
| #include <common.h> |
| #include <spl.h> |
| #include <malloc.h> |
| #include <remoteproc.h> |
| #include <linux/soc/ti/ti_sci_protocol.h> |
| #include <g_dnl.h> |
| #include <usb.h> |
| #include <dfu.h> |
| |
| #include <asm/arch/sys_proto.h> |
| #include "common.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* Name of the FIT image nodes for SYSFW and its config data */ |
| #define SYSFW_FIRMWARE "sysfw.bin" |
| #define SYSFW_CFG_BOARD "board-cfg.bin" |
| #define SYSFW_CFG_PM "pm-cfg.bin" |
| #define SYSFW_CFG_RM "rm-cfg.bin" |
| #define SYSFW_CFG_SEC "sec-cfg.bin" |
| |
| static bool sysfw_loaded; |
| static void *sysfw_load_address; |
| |
| /* |
| * Populate SPL hook to override the default load address used by the SPL |
| * loader function with a custom address for SYSFW loading. |
| */ |
| struct image_header *spl_get_load_buffer(ssize_t offset, size_t size) |
| { |
| if (sysfw_loaded) |
| return (struct image_header *)(CONFIG_SYS_TEXT_BASE + offset); |
| else if (sysfw_load_address) |
| return sysfw_load_address; |
| else |
| panic("SYSFW load address not defined!"); |
| } |
| |
| /* |
| * Populate SPL hook to skip the default SPL loader FIT post-processing steps |
| * during SYSFW loading and return to the calling function so we can perform |
| * our own custom processing. |
| */ |
| bool spl_load_simple_fit_skip_processing(void) |
| { |
| return !sysfw_loaded; |
| } |
| |
| static int fit_get_data_by_name(const void *fit, int images, const char *name, |
| const void **addr, size_t *size) |
| { |
| int node_offset; |
| |
| node_offset = fdt_subnode_offset(fit, images, name); |
| if (node_offset < 0) |
| return -ENOENT; |
| |
| return fit_image_get_data(fit, node_offset, addr, size); |
| } |
| |
| static void k3_sysfw_load_using_fit(void *fit) |
| { |
| int images; |
| const void *sysfw_addr; |
| size_t sysfw_size; |
| int ret; |
| |
| /* Find the node holding the images information */ |
| images = fdt_path_offset(fit, FIT_IMAGES_PATH); |
| if (images < 0) |
| panic("Cannot find /images node (%d)\n", images); |
| |
| /* Extract System Firmware (SYSFW) image from FIT */ |
| ret = fit_get_data_by_name(fit, images, SYSFW_FIRMWARE, |
| &sysfw_addr, &sysfw_size); |
| if (ret < 0) |
| panic("Error accessing %s node in FIT (%d)\n", SYSFW_FIRMWARE, |
| ret); |
| |
| /* |
| * Start up system controller firmware |
| * |
| * It is assumed that remoteproc device 0 is the corresponding |
| * system-controller that runs SYSFW. Make sure DT reflects the same. |
| */ |
| ret = rproc_dev_init(0); |
| if (ret) |
| panic("rproc failed to be initialized (%d)\n", ret); |
| |
| ret = rproc_load(0, (ulong)sysfw_addr, (ulong)sysfw_size); |
| if (ret) |
| panic("Firmware failed to start on rproc (%d)\n", ret); |
| |
| ret = rproc_start(0); |
| if (ret) |
| panic("Firmware init failed on rproc (%d)\n", ret); |
| } |
| |
| static void k3_sysfw_configure_using_fit(void *fit, |
| struct ti_sci_handle *ti_sci) |
| { |
| struct ti_sci_board_ops *board_ops = &ti_sci->ops.board_ops; |
| int images; |
| const void *cfg_fragment_addr; |
| size_t cfg_fragment_size; |
| int ret; |
| |
| /* Find the node holding the images information */ |
| images = fdt_path_offset(fit, FIT_IMAGES_PATH); |
| if (images < 0) |
| panic("Cannot find /images node (%d)\n", images); |
| |
| /* Extract board configuration from FIT */ |
| ret = fit_get_data_by_name(fit, images, SYSFW_CFG_BOARD, |
| &cfg_fragment_addr, &cfg_fragment_size); |
| if (ret < 0) |
| panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_BOARD, |
| ret); |
| |
| /* Apply board configuration to SYSFW */ |
| ret = board_ops->board_config(ti_sci, |
| (u64)(u32)cfg_fragment_addr, |
| (u32)cfg_fragment_size); |
| if (ret) |
| panic("Failed to set board configuration (%d)\n", ret); |
| |
| /* Extract power/clock (PM) specific configuration from FIT */ |
| ret = fit_get_data_by_name(fit, images, SYSFW_CFG_PM, |
| &cfg_fragment_addr, &cfg_fragment_size); |
| if (ret < 0) |
| panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_PM, |
| ret); |
| |
| /* Apply power/clock (PM) specific configuration to SYSFW */ |
| ret = board_ops->board_config_pm(ti_sci, |
| (u64)(u32)cfg_fragment_addr, |
| (u32)cfg_fragment_size); |
| if (ret) |
| panic("Failed to set board PM configuration (%d)\n", ret); |
| |
| /* Extract resource management (RM) specific configuration from FIT */ |
| ret = fit_get_data_by_name(fit, images, SYSFW_CFG_RM, |
| &cfg_fragment_addr, &cfg_fragment_size); |
| if (ret < 0) |
| panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_RM, |
| ret); |
| |
| /* Apply resource management (RM) configuration to SYSFW */ |
| ret = board_ops->board_config_rm(ti_sci, |
| (u64)(u32)cfg_fragment_addr, |
| (u32)cfg_fragment_size); |
| if (ret) |
| panic("Failed to set board RM configuration (%d)\n", ret); |
| |
| /* Extract security specific configuration from FIT */ |
| ret = fit_get_data_by_name(fit, images, SYSFW_CFG_SEC, |
| &cfg_fragment_addr, &cfg_fragment_size); |
| if (ret < 0) |
| panic("Error accessing %s node in FIT (%d)\n", SYSFW_CFG_SEC, |
| ret); |
| |
| /* Apply security configuration to SYSFW */ |
| ret = board_ops->board_config_security(ti_sci, |
| (u64)(u32)cfg_fragment_addr, |
| (u32)cfg_fragment_size); |
| if (ret) |
| panic("Failed to set board security configuration (%d)\n", |
| ret); |
| } |
| |
| #if CONFIG_IS_ENABLED(DFU) |
| static int k3_sysfw_dfu_download(void *addr) |
| { |
| char dfu_str[50]; |
| int ret; |
| |
| sprintf(dfu_str, "sysfw.itb ram 0x%p 0x%x", addr, |
| CONFIG_K3_SYSFW_IMAGE_SIZE_MAX); |
| ret = dfu_config_entities(dfu_str, "ram", "0"); |
| if (ret) { |
| dfu_free_entities(); |
| goto exit; |
| } |
| |
| run_usb_dnl_gadget(0, "usb_dnl_dfu"); |
| exit: |
| dfu_free_entities(); |
| return ret; |
| } |
| #endif |
| |
| void k3_sysfw_loader(void (*config_pm_pre_callback) (void), |
| void (*config_pm_done_callback)(void)) |
| { |
| struct spl_image_info spl_image = { 0 }; |
| struct spl_boot_device bootdev = { 0 }; |
| struct ti_sci_handle *ti_sci; |
| int ret; |
| |
| /* Reserve a block of aligned memory for loading the SYSFW image */ |
| sysfw_load_address = memalign(ARCH_DMA_MINALIGN, |
| CONFIG_K3_SYSFW_IMAGE_SIZE_MAX); |
| if (!sysfw_load_address) |
| panic("Error allocating %u bytes of memory for SYSFW image\n", |
| CONFIG_K3_SYSFW_IMAGE_SIZE_MAX); |
| |
| debug("%s: allocated %u bytes at 0x%p\n", __func__, |
| CONFIG_K3_SYSFW_IMAGE_SIZE_MAX, sysfw_load_address); |
| |
| /* Set load address for legacy modes that bypass spl_get_load_buffer */ |
| spl_image.load_addr = (uintptr_t)sysfw_load_address; |
| |
| bootdev.boot_device = spl_boot_device(); |
| |
| /* Load combined System Controller firmware and config data image */ |
| switch (bootdev.boot_device) { |
| #if CONFIG_IS_ENABLED(MMC_SUPPORT) |
| case BOOT_DEVICE_MMC1: |
| case BOOT_DEVICE_MMC2: |
| case BOOT_DEVICE_MMC2_2: |
| ret = spl_mmc_load(&spl_image, &bootdev, |
| #ifdef CONFIG_K3_SYSFW_IMAGE_NAME |
| CONFIG_K3_SYSFW_IMAGE_NAME, |
| #else |
| NULL, |
| #endif |
| #ifdef CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART |
| CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_PART, |
| #else |
| 0, |
| #endif |
| #ifdef CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT |
| CONFIG_K3_SYSFW_IMAGE_MMCSD_RAW_MODE_SECT); |
| #else |
| 0); |
| #endif |
| break; |
| #endif |
| #if CONFIG_IS_ENABLED(YMODEM_SUPPORT) |
| case BOOT_DEVICE_UART: |
| #ifdef CONFIG_K3_EARLY_CONS |
| /* |
| * Establish a serial console if not yet available as required |
| * for UART-based boot. For this use the early console feature |
| * that allows setting up a UART for use before SYSFW has been |
| * brought up. Note that the associated UART module's clocks |
| * must have gotten enabled by the ROM bootcode which will be |
| * the case when continuing to boot serially from the same |
| * UART that the ROM loaded the initial bootloader from. |
| */ |
| if (!gd->have_console) |
| early_console_init(); |
| #endif |
| ret = spl_ymodem_load_image(&spl_image, &bootdev); |
| break; |
| #endif |
| #if CONFIG_IS_ENABLED(DFU) |
| case BOOT_DEVICE_DFU: |
| ret = k3_sysfw_dfu_download(sysfw_load_address); |
| break; |
| #endif |
| default: |
| panic("Loading SYSFW image from device %u not supported!\n", |
| bootdev.boot_device); |
| } |
| |
| if (ret) |
| panic("Error %d occurred during loading SYSFW image!\n", ret); |
| |
| /* |
| * Now that SYSFW got loaded set helper flag to restore regular SPL |
| * loader behavior so we can later boot into the next stage as expected. |
| */ |
| sysfw_loaded = true; |
| |
| /* Ensure the SYSFW image is in FIT format */ |
| if (image_get_magic((const image_header_t *)sysfw_load_address) != |
| FDT_MAGIC) |
| panic("SYSFW image not in FIT format!\n"); |
| |
| /* Extract and start SYSFW */ |
| k3_sysfw_load_using_fit(sysfw_load_address); |
| |
| /* Get handle for accessing SYSFW services */ |
| ti_sci = get_ti_sci_handle(); |
| |
| if (config_pm_pre_callback) |
| config_pm_pre_callback(); |
| |
| /* Parse and apply the different SYSFW configuration fragments */ |
| k3_sysfw_configure_using_fit(sysfw_load_address, ti_sci); |
| |
| /* |
| * Now that all clocks and PM aspects are setup, invoke a user- |
| * provided callback function. Usually this callback would be used |
| * to setup or re-configure the U-Boot console UART. |
| */ |
| if (config_pm_done_callback) |
| config_pm_done_callback(); |
| |
| /* |
| * Output System Firmware version info. Note that since the |
| * 'firmware_description' field is not guaranteed to be zero- |
| * terminated we manually add a \0 terminator if needed. Further |
| * note that we intentionally no longer rely on the extended |
| * printf() formatter '%.*s' to not having to require a more |
| * full-featured printf() implementation. |
| */ |
| char fw_desc[sizeof(ti_sci->version.firmware_description) + 1]; |
| |
| strncpy(fw_desc, ti_sci->version.firmware_description, |
| sizeof(ti_sci->version.firmware_description)); |
| fw_desc[sizeof(fw_desc) - 1] = '\0'; |
| |
| printf("SYSFW ABI: %d.%d (firmware rev 0x%04x '%s')\n", |
| ti_sci->version.abi_major, ti_sci->version.abi_minor, |
| ti_sci->version.firmware_revision, fw_desc); |
| } |