| /* |
| * (C) Copyright 2003 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * This file contains the configuration parameters for the dbau1x00 board. |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #define CONFIG_MIPS32 1 /* MIPS32 CPU core */ |
| #define CONFIG_DBAU1X00 1 |
| #define CONFIG_AU1X00 1 /* alchemy series cpu */ |
| |
| #ifdef CONFIG_DBAU1000 |
| /* Also known as Merlot */ |
| #define CONFIG_AU1000 1 |
| #else |
| #ifdef CONFIG_DBAU1100 |
| #define CONFIG_AU1100 1 |
| #else |
| #ifdef CONFIG_DBAU1500 |
| #define CONFIG_AU1500 1 |
| #else |
| #error "No valid board set" |
| #endif |
| #endif |
| #endif |
| |
| #define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ |
| |
| #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ |
| |
| #define CONFIG_BAUDRATE 115200 |
| |
| /* valid baudrates */ |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| #define CONFIG_TIMESTAMP /* Print image info with timestamp */ |
| #undef CONFIG_BOOTARGS |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "addmisc=setenv bootargs $(bootargs) " \ |
| "console=ttyS0,$(baudrate) " \ |
| "panic=1\0" \ |
| "bootfile=/tftpboot/vmlinux.srec\0" \ |
| "load=tftp 80500000 $(u-boot)\0" \ |
| "" |
| /* Boot from Compact flash partition 2 as default */ |
| #define CONFIG_BOOTCOMMAND "ide reset;disk 0x81000000 0:2;bootm" |
| |
| #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | \ |
| CFG_CMD_IDE | \ |
| CFG_CMD_DHCP | \ |
| CFG_CMD_ELF ) & \ |
| ~(CFG_CMD_ENV | CFG_CMD_FAT | CFG_CMD_FLASH | CFG_CMD_FPGA | \ |
| CFG_CMD_MII | CFG_CMD_LOADS | CFG_CMD_RUN | CFG_CMD_LOADB | CFG_CMD_ELF | \ |
| CFG_CMD_BDI | CFG_CMD_BEDBUG)) |
| #include <cmd_confdefs.h> |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CFG_LONGHELP /* undef to save memory */ |
| #define CFG_PROMPT "DbAu1x00 # " /* Monitor Command Prompt */ |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
| #define CFG_MAXARGS 16 /* max number of command args*/ |
| |
| #define CFG_MALLOC_LEN 128*1024 |
| |
| #define CFG_BOOTPARAMS_LEN 128*1024 |
| |
| #define CFG_HZ 396000000 /* FIXME causes overflow in net.c */ |
| |
| #define CFG_SDRAM_BASE 0x80000000 /* Cached addr */ |
| |
| #define CFG_LOAD_ADDR 0x81000000 /* default load address */ |
| |
| #define CFG_MEMTEST_START 0x80100000 |
| #define CFG_MEMTEST_END 0x80800000 |
| |
| /*----------------------------------------------------------------------- |
| * FLASH and environment organization |
| */ |
| #define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ |
| #define CFG_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ |
| |
| #define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */ |
| #define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */ |
| |
| /* The following #defines are needed to get flash environment right */ |
| #define CFG_MONITOR_BASE TEXT_BASE |
| #define CFG_MONITOR_LEN (192 << 10) |
| |
| #define CFG_INIT_SP_OFFSET 0x400000 |
| |
| /* We boot from this flash, selected with dip switch */ |
| #define CFG_FLASH_BASE PHYS_FLASH_2 |
| |
| /* timeout values are in ticks */ |
| #define CFG_FLASH_ERASE_TOUT (2 * CFG_HZ) /* Timeout for Flash Erase */ |
| #define CFG_FLASH_WRITE_TOUT (2 * CFG_HZ) /* Timeout for Flash Write */ |
| |
| #define CFG_ENV_IS_NOWHERE 1 |
| |
| /* Address and size of Primary Environment Sector */ |
| #define CFG_ENV_ADDR 0xB0030000 |
| #define CFG_ENV_SIZE 0x10000 |
| |
| #define CONFIG_FLASH_16BIT |
| |
| #define CONFIG_NR_DRAM_BANKS 2 |
| |
| #define CONFIG_NET_MULTI |
| |
| #define CONFIG_MEMSIZE_IN_BYTES |
| |
| /*---ATA PCMCIA ------------------------------------*/ |
| #define CFG_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ |
| #define CFG_PCMCIA_MEM_ADDR 0x20000000 |
| #define CONFIG_PCMCIA_SLOT_A |
| |
| #define CONFIG_ATAPI 1 |
| #define CONFIG_MAC_PARTITION 1 |
| |
| /* We run CF in "true ide" mode or a harddrive via pcmcia */ |
| #define CONFIG_IDE_PCMCIA 1 |
| |
| /* We only support one slot for now */ |
| #define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ |
| #define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ |
| |
| #undef CONFIG_IDE_LED /* LED for ide not supported */ |
| #undef CONFIG_IDE_RESET /* reset for ide not supported */ |
| |
| #define CFG_ATA_IDE0_OFFSET 0x0000 |
| |
| #define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR |
| |
| /* Offset for data I/O */ |
| #define CFG_ATA_DATA_OFFSET 8 |
| |
| /* Offset for normal register accesses */ |
| #define CFG_ATA_REG_OFFSET 0 |
| |
| /* Offset for alternate registers */ |
| #define CFG_ATA_ALT_OFFSET 0x0100 |
| |
| /*----------------------------------------------------------------------- |
| * Cache Configuration |
| */ |
| #define CFG_DCACHE_SIZE 16384 |
| #define CFG_ICACHE_SIZE 16384 |
| #define CFG_CACHELINE_SIZE 32 |
| |
| #define DB1000_BCSR_ADDR 0xAE000000 |
| |
| #endif /* __CONFIG_H */ |