include/configs/bk4r1.h - platform/external/u-boot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2018
  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
  *
  * Copyright 2016 3ADEV <http://3adev.com>
  * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
  *
  * Configuration settings for BK4R1.
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 /* Define the BK4r1-specific env commands */
 #define BK4_EXTRA_ENV_SETTINGS \
 	"bootlimit=3\0" \
 	"eraseuserdata=false\0" \
 	"altbootcmd=led 5 on; " \
 		"boot\0" \
 	"set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \
 	"set_gpio102=mw 0x400ff0c4 0x40; mw 0x40048198 0x000011bf\0" \
 	"set_gpio96=mw 0x40048180 0x282; mw 0x400ff0c4 0x1\0"\
 	"set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"\
 	"set_gpio6=mw 0x40048018 0x282; mw 0x400ff008 0x40\0"\
 	"manage_userdata=" MANAGE_USERDATA "\0"\
 	"ncenable=true\0"\
 	"ncserverip=192.168.0.77\0"\
 	"if_netconsole=ping $ncserverip\0"\
 	"start_netconsole=setenv ncip $serverip; setenv bootdelay 10;" \
 	     "setenv stdin nc; setenv stdout nc; setenv stderr nc; version;\0" \
 	"preboot=" BK4_NET_INIT \
 		"if ${ncenable}; then run if_netconsole start_netconsole; fi\0"

 /* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/
 #define BK4_BOOTCOMMAND "run set_gpio122; run set_gpio96; sf probe; " \
 			"run manage_userdata; "

 /* Enable PREBOOT variable */

 /* Set ARP_TIMEOUT to 500ms */
 #define CONFIG_ARP_TIMEOUT 500UL

 /* Set ARP_TIMEOUT_COUNT to 3 repetitions */
 #define CONFIG_NET_RETRY_COUNT	5

 /* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */
 #define BK4_NET_INIT "run set_gpio122;"

 /* Check if userdata volume shall be erased */
 #define MANAGE_USERDATA "if ${eraseuserdata}; " \
 						"then ubi part system; " \
 						"ubi remove userdata; " \
 						"ubi create userdata; " \
 						"ubi detach; " \
 						"setenv eraseuserdata false; " \
 						"saveenv; " \
 						"fi; "

 #include <asm/arch/imx-regs.h>
 #include <linux/sizes.h>

 #define CONFIG_SKIP_LOWLEVEL_INIT

 /* Enable passing of ATAGs */
 #define CONFIG_CMDLINE_TAG

 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 4 * SZ_1M)

 /* Allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE

 /* NAND support */
 #define CONFIG_SYS_NAND_ONFI_DETECTION
 #define CONFIG_SYS_MAX_NAND_DEVICE 1

 #define IMX_FEC1_BASE			ENET1_BASE_ADDR

 /* QSPI Configs*/
 #ifdef CONFIG_FSL_QSPI
 #define FSL_QSPI_FLASH_SIZE		(SZ_16M)
 #define FSL_QSPI_FLASH_NUM		2
 #define CONFIG_SYS_FSL_QSPI_LE
 #endif

 #define CONFIG_LOADADDR	0x82000000

 /* We boot from the gfxRAM area of the OCRAM. */
 #define CONFIG_BOARD_SIZE_LIMIT		520192

 /* boot command, including the target-defined one if any */
 #define CONFIG_BOOTCOMMAND	BK4_BOOTCOMMAND "run bootcmd_nand"

 /* Extra env settings (including the target-defined ones if any) */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BK4_EXTRA_ENV_SETTINGS \
 	"autoload=no\0" \
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"blimg_file=u-boot.vyb\0" \
 	"blimg_addr=0x81000000\0" \
 	"dtbkernel_file=fitImage\0" \
 	"dtbkernel_addr=0x82000000\0" \
 	"ram_file=uRamdisk\0" \
 	"ram_addr=0x83000000\0" \
 	"filesys=rootfs.ubifs\0" \
 	"sys_addr=0x81000000\0" \
 	"nfs_root=/path/to/nfs/root\0" \
 	"tftptimeout=1000\0" \
 	"tftptimeoutcountmax=1000000\0" \
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"ipaddr=192.168.0.60\0" \
 	"serverip=192.168.0.1\0" \
 	"bootargs_base=setenv bootargs rw " \
 	"console=ttyLP1,115200n8\0" \
 	"bootargs_sd=setenv bootargs ${bootargs} " \
 		"root=/dev/mmcblk0p2 rootwait\0" \
 	"bootargs_nand=setenv bootargs ${bootargs} " \
 		"ubi.mtd=5 rootfstype=" \
 				"ubifs root=ubi0:rootfs${active_workset}\0" \
 	"bootargs_ram=setenv bootargs ${bootargs} " \
 		"root=/dev/ram rw initrd=${ram_addr}\0" \
 	"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
 	"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
 		"fatload mmc 0:2 ${dtbkernel_addr} ${dtbkernel_file}; " \
 		"bootm ${dtbkernel_addr}\0" \
 	"bootcmd_nand=sf probe;run bootargs_base bootargs_nand bootargs_mtd; " \
 		"ubi part dtbkernel; " \
 		"ubi readvol ${dtbkernel_addr} dtbkernel${active_workset}; " \
 		"led 0 on; " \
 		"bootm ${dtbkernel_addr}\0" \
 	"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
 		"nand read ${fdt_addr} dtb; " \
 		"nand read ${kernel_addr} kernel; " \
 		"nand read ${ram_addr} root; " \
 		"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
 	"update_bootloader_from_sd=if fatload mmc 0:2 ${blimg_addr} " \
 		"${blimg_file}; " \
 		"then sf probe; " \
 		"mtdparts default; " \
 		"nand erase.part bootloader; " \
 		"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
 	"update_bootloader_from_tftp=if tftp ${blimg_addr} "\
 		"${tftpdir}${blimg_file}; "\
 		"then sf probe; " \
 		"mtdparts default; " \
 		"nand erase.part bootloader; " \
 		"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
 	"update_dtbkernel_from_sd=if fatload mmc 0:2 ${dtbkernel_addr} " \
 		"${dtbkernel_file}; " \
 		"then sf probe; " \
 		"ubi part dtbkernel; " \
 		"ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \
 		"${filesize}; " \
 		"ubi detach; fi\0" \
 	"update_dtbkernel_from_tftp=if tftp ${dtbkernel_addr} " \
 		"${tftpdir}${dtbkernel_file}; " \
 		"then sf probe; " \
 		"ubi part dtbkernel; " \
 		"ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \
 		"${filesize}; " \
 		"ubi detach; fi\0" \
 	"update_ramdisk_from_sd=if fatload mmc 0:2 ${ram_addr} " \
 		"${ram_file}; " \
 		"then sf probe; " \
 		"mtdparts default; " \
 		"nand erase.part initrd; " \
 		"nand write ${ram_addr} initrd ${filesize}; fi\0" \
 	"update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
 		"then sf probe; " \
 		"nand erase.part initrd; " \
 		"nand write ${ram_addr} initrd ${filesize}; fi\0" \
 	"update_rootfs_from_sd=if fatload mmc 0:2 ${sys_addr} " \
 		"${filesys}; " \
 		"then sf probe; " \
 		"ubi part system; " \
 		"ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \
 		"ubi detach; fi\0" \
 	"update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \
 		"then sf probe; " \
 		"ubi part system; " \
 		"ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \
 		"ubi detach; fi\0" \
 	"setup_dtbkernel=nand erase.part dtbkernel; " \
 		"ubi part dtbkernel; " \
 		"ubi create dtbkernel1 972000 s; " \
 		"ubi create dtbkernel2 972000 s; " \
 		"ubi detach\0" \
 	"setup_system=nand erase.part system; " \
 		"ubi part system; " \
 		"ubi create rootfs1 15E15000 d; " \
 		"ubi create rootfs2 15E15000 d; " \
 		"ubi create userdata; " \
 		"ubi detach\0" \
 	"setup_nor1=" BK4_NET_INIT \
 		"if tftp ${sys_addr} ${tftpdir}ubinor1.img; " \
 		"then sf probe 0:0; " \
 		"sf erase 0 01000000; " \
 		"mtdparts default; " \
 		"ubi part nor; " \
 		"ubi create nor1fs; " \
 		"ubi write ${sys_addr} nor1fs ${filesize}; " \
 		"ubi detach; fi\0" \
 	"setup_nor2=" BK4_NET_INIT \
 		"if tftp ${sys_addr} ${tftpdir}ubinor2.img; " \
 		"then sf probe 0:1; " \
 		"sf erase 0 01000000; " \
 		"mtdparts default; " \
 		"ubi part nor; " \
 		"ubi create nor2fs; " \
 		"ubi write ${sys_addr} nor2fs ${filesize}; " \
 		"ubi detach; fi\0" \
 	"prepare_install_bk4r1_envs=" \
 		"echo 'Preparing envs for SD card recovery!';" \
 		"setenv ipaddr 192.168.0.99;" \
 		"setenv serverip 192.168.0.50;" \
 		"\0" \
 	"install_bk4r1rs="\
 		"led 0 on; " \
 		"nand erase.chip; mtdparts default; "\
 		"led 1 on; "\
 		"run setup_dtbkernel; " \
 		"run setup_system; " \
 		"led 2 on;" \
 		"run update_bootloader_from_sd; "\
 		"run update_dtbkernel_from_sd; "\
 		"run update_rootfs_from_sd; "\
 		"setenv bootcmd 'run bootcmd_nand'; "\
 		"saveenv; " \
 		"led 3 on; " \
 		"echo Finished - Please Power off, REMOVE SDCARD and set boot" \
 			"source to NAND\0" \
 	"active_workset=1\0"

 /* Miscellaneous configurable options */

 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR

 /* Physical memory map */
 #define PHYS_SDRAM			(0x80000000)
 #define PHYS_SDRAM_SIZE		(SZ_512M)

 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 #endif /* __CONFIG_H */
	/* SPDX-License-Identifier: GPL-2.0+ */
	/*
	* Copyright (C) 2018
	* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
	*
	* Copyright 2016 3ADEV <http://3adev.com>
	* Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
	*
	* Configuration settings for BK4R1.
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	/* Define the BK4r1-specific env commands */
	#define BK4_EXTRA_ENV_SETTINGS \
	"bootlimit=3\0" \
	"eraseuserdata=false\0" \
	"altbootcmd=led 5 on; " \
	"boot\0" \
	"set_gpio103=mw 0x400ff0c4 0x0080; mw 0x4004819C 0x000011bf\0" \
	"set_gpio102=mw 0x400ff0c4 0x40; mw 0x40048198 0x000011bf\0" \
	"set_gpio96=mw 0x40048180 0x282; mw 0x400ff0c4 0x1\0"\
	"set_gpio122=mw 0x400481e8 0x0282; mw 0x400ff0c4 0x04000000\0"\
	"set_gpio6=mw 0x40048018 0x282; mw 0x400ff008 0x40\0"\
	"manage_userdata=" MANAGE_USERDATA "\0"\
	"ncenable=true\0"\
	"ncserverip=192.168.0.77\0"\
	"if_netconsole=ping $ncserverip\0"\
	"start_netconsole=setenv ncip $serverip; setenv bootdelay 10;" \
	"setenv stdin nc; setenv stdout nc; setenv stderr nc; version;\0" \
	"preboot=" BK4_NET_INIT \
	"if ${ncenable}; then run if_netconsole start_netconsole; fi\0"

	/* BK4r1 boot command sets GPIO103/PTC30 to force USB hub out of reset*/
	#define BK4_BOOTCOMMAND "run set_gpio122; run set_gpio96; sf probe; " \
	"run manage_userdata; "

	/* Enable PREBOOT variable */

	/* Set ARP_TIMEOUT to 500ms */
	#define CONFIG_ARP_TIMEOUT 500UL

	/* Set ARP_TIMEOUT_COUNT to 3 repetitions */
	#define CONFIG_NET_RETRY_COUNT 5

	/* BK4r1 net init sets GPIO122/PTE17 to enable Ethernet */
	#define BK4_NET_INIT "run set_gpio122;"

	/* Check if userdata volume shall be erased */
	#define MANAGE_USERDATA "if ${eraseuserdata}; " \
	"then ubi part system; " \
	"ubi remove userdata; " \
	"ubi create userdata; " \
	"ubi detach; " \
	"setenv eraseuserdata false; " \
	"saveenv; " \
	"fi; "

	#include <asm/arch/imx-regs.h>
	#include <linux/sizes.h>

	#define CONFIG_SKIP_LOWLEVEL_INIT

	/* Enable passing of ATAGs */
	#define CONFIG_CMDLINE_TAG

	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 4 * SZ_1M)

	/* Allow to overwrite serial and ethaddr */
	#define CONFIG_ENV_OVERWRITE

	/* NAND support */
	#define CONFIG_SYS_NAND_ONFI_DETECTION
	#define CONFIG_SYS_MAX_NAND_DEVICE 1

	#define IMX_FEC1_BASE ENET1_BASE_ADDR

	/* QSPI Configs*/
	#ifdef CONFIG_FSL_QSPI
	#define FSL_QSPI_FLASH_SIZE (SZ_16M)
	#define FSL_QSPI_FLASH_NUM 2
	#define CONFIG_SYS_FSL_QSPI_LE
	#endif

	#define CONFIG_LOADADDR 0x82000000

	/* We boot from the gfxRAM area of the OCRAM. */
	#define CONFIG_BOARD_SIZE_LIMIT 520192

	/* boot command, including the target-defined one if any */
	#define CONFIG_BOOTCOMMAND BK4_BOOTCOMMAND "run bootcmd_nand"

	/* Extra env settings (including the target-defined ones if any) */
	#define CONFIG_EXTRA_ENV_SETTINGS \
	BK4_EXTRA_ENV_SETTINGS \
	"autoload=no\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"blimg_file=u-boot.vyb\0" \
	"blimg_addr=0x81000000\0" \
	"dtbkernel_file=fitImage\0" \
	"dtbkernel_addr=0x82000000\0" \
	"ram_file=uRamdisk\0" \
	"ram_addr=0x83000000\0" \
	"filesys=rootfs.ubifs\0" \
	"sys_addr=0x81000000\0" \
	"nfs_root=/path/to/nfs/root\0" \
	"tftptimeout=1000\0" \
	"tftptimeoutcountmax=1000000\0" \
	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
	"ipaddr=192.168.0.60\0" \
	"serverip=192.168.0.1\0" \
	"bootargs_base=setenv bootargs rw " \
	"console=ttyLP1,115200n8\0" \
	"bootargs_sd=setenv bootargs ${bootargs} " \
	"root=/dev/mmcblk0p2 rootwait\0" \
	"bootargs_nand=setenv bootargs ${bootargs} " \
	"ubi.mtd=5 rootfstype=" \
	"ubifs root=ubi0:rootfs${active_workset}\0" \
	"bootargs_ram=setenv bootargs ${bootargs} " \
	"root=/dev/ram rw initrd=${ram_addr}\0" \
	"bootargs_mtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"bootcmd_sd=run bootargs_base bootargs_sd bootargs_mtd; " \
	"fatload mmc 0:2 ${dtbkernel_addr} ${dtbkernel_file}; " \
	"bootm ${dtbkernel_addr}\0" \
	"bootcmd_nand=sf probe;run bootargs_base bootargs_nand bootargs_mtd; " \
	"ubi part dtbkernel; " \
	"ubi readvol ${dtbkernel_addr} dtbkernel${active_workset}; " \
	"led 0 on; " \
	"bootm ${dtbkernel_addr}\0" \
	"bootcmd_ram=run bootargs_base bootargs_ram bootargs_mtd; " \
	"nand read ${fdt_addr} dtb; " \
	"nand read ${kernel_addr} kernel; " \
	"nand read ${ram_addr} root; " \
	"bootz ${kernel_addr} ${ram_addr} ${fdt_addr}\0" \
	"update_bootloader_from_sd=if fatload mmc 0:2 ${blimg_addr} " \
	"${blimg_file}; " \
	"then sf probe; " \
	"mtdparts default; " \
	"nand erase.part bootloader; " \
	"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
	"update_bootloader_from_tftp=if tftp ${blimg_addr} "\
	"${tftpdir}${blimg_file}; "\
	"then sf probe; " \
	"mtdparts default; " \
	"nand erase.part bootloader; " \
	"nand write ${blimg_addr} bootloader ${filesize}; fi\0" \
	"update_dtbkernel_from_sd=if fatload mmc 0:2 ${dtbkernel_addr} " \
	"${dtbkernel_file}; " \
	"then sf probe; " \
	"ubi part dtbkernel; " \
	"ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \
	"${filesize}; " \
	"ubi detach; fi\0" \
	"update_dtbkernel_from_tftp=if tftp ${dtbkernel_addr} " \
	"${tftpdir}${dtbkernel_file}; " \
	"then sf probe; " \
	"ubi part dtbkernel; " \
	"ubi write ${dtbkernel_addr} dtbkernel${active_workset} " \
	"${filesize}; " \
	"ubi detach; fi\0" \
	"update_ramdisk_from_sd=if fatload mmc 0:2 ${ram_addr} " \
	"${ram_file}; " \
	"then sf probe; " \
	"mtdparts default; " \
	"nand erase.part initrd; " \
	"nand write ${ram_addr} initrd ${filesize}; fi\0" \
	"update_ramdisk_from_tftp=if tftp ${ram_addr} ${tftpdir}${ram_file}; " \
	"then sf probe; " \
	"nand erase.part initrd; " \
	"nand write ${ram_addr} initrd ${filesize}; fi\0" \
	"update_rootfs_from_sd=if fatload mmc 0:2 ${sys_addr} " \
	"${filesys}; " \
	"then sf probe; " \
	"ubi part system; " \
	"ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \
	"ubi detach; fi\0" \
	"update_rootfs_from_tftp=if tftp ${sys_addr} ${tftpdir}${filesys}; " \
	"then sf probe; " \
	"ubi part system; " \
	"ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \
	"ubi detach; fi\0" \
	"setup_dtbkernel=nand erase.part dtbkernel; " \
	"ubi part dtbkernel; " \
	"ubi create dtbkernel1 972000 s; " \
	"ubi create dtbkernel2 972000 s; " \
	"ubi detach\0" \
	"setup_system=nand erase.part system; " \
	"ubi part system; " \
	"ubi create rootfs1 15E15000 d; " \
	"ubi create rootfs2 15E15000 d; " \
	"ubi create userdata; " \
	"ubi detach\0" \
	"setup_nor1=" BK4_NET_INIT \
	"if tftp ${sys_addr} ${tftpdir}ubinor1.img; " \
	"then sf probe 0:0; " \
	"sf erase 0 01000000; " \
	"mtdparts default; " \
	"ubi part nor; " \
	"ubi create nor1fs; " \
	"ubi write ${sys_addr} nor1fs ${filesize}; " \
	"ubi detach; fi\0" \
	"setup_nor2=" BK4_NET_INIT \
	"if tftp ${sys_addr} ${tftpdir}ubinor2.img; " \
	"then sf probe 0:1; " \
	"sf erase 0 01000000; " \
	"mtdparts default; " \
	"ubi part nor; " \
	"ubi create nor2fs; " \
	"ubi write ${sys_addr} nor2fs ${filesize}; " \
	"ubi detach; fi\0" \
	"prepare_install_bk4r1_envs=" \
	"echo 'Preparing envs for SD card recovery!';" \
	"setenv ipaddr 192.168.0.99;" \
	"setenv serverip 192.168.0.50;" \
	"\0" \
	"install_bk4r1rs="\
	"led 0 on; " \
	"nand erase.chip; mtdparts default; "\
	"led 1 on; "\
	"run setup_dtbkernel; " \
	"run setup_system; " \
	"led 2 on;" \
	"run update_bootloader_from_sd; "\
	"run update_dtbkernel_from_sd; "\
	"run update_rootfs_from_sd; "\
	"setenv bootcmd 'run bootcmd_nand'; "\
	"saveenv; " \
	"led 3 on; " \
	"echo Finished - Please Power off, REMOVE SDCARD and set boot" \
	"source to NAND\0" \
	"active_workset=1\0"

	/* Miscellaneous configurable options */

	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	/* Physical memory map */
	#define PHYS_SDRAM (0x80000000)
	#define PHYS_SDRAM_SIZE (SZ_512M)

	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	#endif /* __CONFIG_H */