| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2021, Collabora Ltd. |
| * Copyright (C) 2021, General Electric Company |
| * Author(s): Sebastian Reichel <sebastian.reichel@collabora.com> |
| */ |
| |
| #define LOG_CATEGORY UCLASS_GPIO |
| |
| #include <common.h> |
| #include <errno.h> |
| #include <dm.h> |
| #include <i2c.h> |
| #include <asm/gpio.h> |
| #include <dm/device_compat.h> |
| #include <dt-bindings/gpio/gpio.h> |
| |
| enum mcp230xx_type { |
| UNKNOWN = 0, |
| MCP23008, |
| MCP23017, |
| MCP23018, |
| }; |
| |
| #define MCP230XX_IODIR 0x00 |
| #define MCP230XX_GPPU 0x06 |
| #define MCP230XX_GPIO 0x09 |
| #define MCP230XX_OLAT 0x0a |
| |
| #define BANKSIZE 8 |
| |
| static int mcp230xx_read(struct udevice *dev, uint reg, uint offset) |
| { |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| int bank = offset / BANKSIZE; |
| int mask = 1 << (offset % BANKSIZE); |
| int shift = (uc_priv->gpio_count / BANKSIZE) - 1; |
| int ret; |
| |
| ret = dm_i2c_reg_read(dev, (reg << shift) | bank); |
| if (ret < 0) |
| return ret; |
| |
| return !!(ret & mask); |
| } |
| |
| static int mcp230xx_write(struct udevice *dev, uint reg, uint offset, bool val) |
| { |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| int bank = offset / BANKSIZE; |
| int mask = 1 << (offset % BANKSIZE); |
| int shift = (uc_priv->gpio_count / BANKSIZE) - 1; |
| |
| return dm_i2c_reg_clrset(dev, (reg << shift) | bank, mask, val ? mask : 0); |
| } |
| |
| static int mcp230xx_get_value(struct udevice *dev, uint offset) |
| { |
| int ret; |
| |
| ret = mcp230xx_read(dev, MCP230XX_GPIO, offset); |
| if (ret < 0) { |
| dev_err(dev, "%s error: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int mcp230xx_set_value(struct udevice *dev, uint offset, int val) |
| { |
| int ret; |
| |
| ret = mcp230xx_write(dev, MCP230XX_GPIO, offset, val); |
| if (ret < 0) { |
| dev_err(dev, "%s error: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return ret; |
| } |
| |
| static int mcp230xx_get_flags(struct udevice *dev, unsigned int offset, |
| ulong *flags) |
| { |
| int direction, pullup; |
| |
| pullup = mcp230xx_read(dev, MCP230XX_GPPU, offset); |
| if (pullup < 0) { |
| dev_err(dev, "%s error: %d\n", __func__, pullup); |
| return pullup; |
| } |
| |
| direction = mcp230xx_read(dev, MCP230XX_IODIR, offset); |
| if (direction < 0) { |
| dev_err(dev, "%s error: %d\n", __func__, direction); |
| return direction; |
| } |
| |
| *flags = direction ? GPIOD_IS_IN : GPIOD_IS_OUT; |
| |
| if (pullup) |
| *flags |= GPIOD_PULL_UP; |
| |
| return 0; |
| } |
| |
| static int mcp230xx_set_flags(struct udevice *dev, uint offset, ulong flags) |
| { |
| bool input = !(flags & (GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE)); |
| bool pullup = flags & GPIOD_PULL_UP; |
| ulong supported_mask; |
| int ret; |
| |
| /* Note: active-low is ignored (handled by core) */ |
| supported_mask = GPIOD_ACTIVE_LOW | GPIOD_MASK_DIR | GPIOD_PULL_UP; |
| if (flags & ~supported_mask) { |
| dev_err(dev, "%s unsupported flag(s): %lx\n", __func__, flags); |
| return -EINVAL; |
| } |
| |
| ret = mcp230xx_write(dev, MCP230XX_OLAT, offset, !!(flags & GPIOD_IS_OUT_ACTIVE)); |
| if (ret) { |
| dev_err(dev, "%s failed to setup output latch: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = mcp230xx_write(dev, MCP230XX_GPPU, offset, pullup); |
| if (ret) { |
| dev_err(dev, "%s failed to setup pull-up: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = mcp230xx_write(dev, MCP230XX_IODIR, offset, input); |
| if (ret) { |
| dev_err(dev, "%s failed to setup direction: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int mcp230xx_direction_input(struct udevice *dev, uint offset) |
| { |
| return mcp230xx_set_flags(dev, offset, GPIOD_IS_IN); |
| } |
| |
| static int mcp230xx_direction_output(struct udevice *dev, uint offset, int val) |
| { |
| int ret = mcp230xx_set_value(dev, offset, val); |
| if (ret < 0) { |
| dev_err(dev, "%s error: %d\n", __func__, ret); |
| return ret; |
| } |
| return mcp230xx_set_flags(dev, offset, GPIOD_IS_OUT); |
| } |
| |
| static int mcp230xx_get_function(struct udevice *dev, uint offset) |
| { |
| int ret; |
| |
| ret = mcp230xx_read(dev, MCP230XX_IODIR, offset); |
| if (ret < 0) { |
| dev_err(dev, "%s error: %d\n", __func__, ret); |
| return ret; |
| } |
| |
| return ret ? GPIOF_INPUT : GPIOF_OUTPUT; |
| } |
| |
| static const struct dm_gpio_ops mcp230xx_ops = { |
| .direction_input = mcp230xx_direction_input, |
| .direction_output = mcp230xx_direction_output, |
| .get_value = mcp230xx_get_value, |
| .set_value = mcp230xx_set_value, |
| .get_function = mcp230xx_get_function, |
| .set_flags = mcp230xx_set_flags, |
| .get_flags = mcp230xx_get_flags, |
| }; |
| |
| static int mcp230xx_probe(struct udevice *dev) |
| { |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| char name[32], label[8], *str; |
| int addr, gpio_count, size; |
| const u8 *tmp; |
| |
| switch (dev_get_driver_data(dev)) { |
| case MCP23008: |
| gpio_count = 8; |
| break; |
| case MCP23017: |
| case MCP23018: |
| gpio_count = 16; |
| break; |
| default: |
| return -ENODEV; |
| } |
| |
| addr = dev_read_addr(dev); |
| tmp = dev_read_prop(dev, "label", &size); |
| if (tmp) { |
| memcpy(label, tmp, sizeof(label) - 1); |
| label[sizeof(label) - 1] = '\0'; |
| snprintf(name, sizeof(name), "%s@%x_", label, addr); |
| } else { |
| snprintf(name, sizeof(name), "gpio@%x_", addr); |
| } |
| |
| str = strdup(name); |
| if (!str) |
| return -ENOMEM; |
| |
| uc_priv->bank_name = str; |
| uc_priv->gpio_count = gpio_count; |
| |
| dev_dbg(dev, "%s is ready\n", str); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id mcp230xx_ids[] = { |
| { .compatible = "microchip,mcp23008", .data = MCP23008, }, |
| { .compatible = "microchip,mcp23017", .data = MCP23017, }, |
| { .compatible = "microchip,mcp23018", .data = MCP23018, }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(mcp230xx) = { |
| .name = "mcp230xx", |
| .id = UCLASS_GPIO, |
| .ops = &mcp230xx_ops, |
| .probe = mcp230xx_probe, |
| .of_match = mcp230xx_ids, |
| }; |