| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * pdu001.h |
| * |
| * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/ |
| * |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ |
| */ |
| |
| #ifndef __CONFIG_PDU001_H |
| #define __CONFIG_PDU001_H |
| |
| #include <configs/ti_am335x_common.h> |
| |
| /* Using 32K of volatile storage for environment */ |
| |
| #define MACH_TYPE_PDU001 5075 |
| #define CONFIG_MACH_TYPE MACH_TYPE_PDU001 |
| |
| /* Clock Defines */ |
| #define V_OSCK 24000000 /* Clock output from T2 */ |
| #define V_SCLK (V_OSCK) |
| |
| #if CONFIG_CONS_INDEX == 1 |
| #define CONSOLE_DEV "ttyO0" |
| #elif CONFIG_CONS_INDEX == 2 |
| #define CONSOLE_DEV "ttyO1" |
| #elif CONFIG_CONS_INDEX == 3 |
| #define CONSOLE_DEV "ttyO2" |
| #elif CONFIG_CONS_INDEX == 4 |
| #define CONSOLE_DEV "ttyO3" |
| #elif CONFIG_CONS_INDEX == 5 |
| #define CONSOLE_DEV "ttyO4" |
| #elif CONFIG_CONS_INDEX == 6 |
| #define CONSOLE_DEV "ttyO5" |
| #endif |
| |
| #define CONFIG_BOOTCOMMAND \ |
| "run eval_boot_device;" \ |
| "setenv bootargs console=${console} " \ |
| "vt.global_cursor_default=0 " \ |
| "root=/dev/mmcblk${mmc_boot}p${root_fs_partition} " \ |
| "rootfstype=ext4 " \ |
| "rootwait " \ |
| "rootdelay=1;" \ |
| "fatload mmc ${mmc_boot} ${fdtaddr} ${fdtfile};" \ |
| "fatload mmc ${mmc_boot} ${loadaddr} ${bootfile};" \ |
| "bootz ${loadaddr} - ${fdtaddr}" |
| |
| #ifndef CONFIG_SPL_BUILD |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| DEFAULT_LINUX_BOOT_ENV \ |
| "fdtfile=am335x-pdu001.dtb\0" \ |
| "bootfile=zImage\0" \ |
| "console=" CONSOLE_DEV ",115200n8\0" \ |
| "root_fs_partition=2\0" \ |
| "eval_boot_device=" \ |
| "if test $boot_device = emmc; then " \ |
| "setenv mmc_boot 0;" \ |
| "elif test $boot_device = sdcard; then " \ |
| "setenv mmc_boot 1;" \ |
| "else " \ |
| "echo Bootdevice is neither MMC0 nor MMC1;" \ |
| "reset;" \ |
| "fi;" \ |
| "\0" |
| #endif |
| |
| /* NS16550 Configuration */ |
| #define CONFIG_SYS_NS16550_COM1 UART0_BASE |
| #define CONFIG_SYS_NS16550_COM2 UART1_BASE |
| #define CONFIG_SYS_NS16550_COM3 UART2_BASE |
| #define CONFIG_SYS_NS16550_COM4 UART3_BASE |
| #define CONFIG_SYS_NS16550_COM5 UART4_BASE |
| #define CONFIG_SYS_NS16550_COM6 UART5_BASE |
| |
| #endif /* ! __CONFIG_PDU001_H */ |