| /* |
| * Copyright 2016-2017 Texas Instruments, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <libfdt.h> |
| #include <fdt_support.h> |
| |
| #include <asm/omap_common.h> |
| #include <asm/omap_sec_common.h> |
| |
| #ifdef CONFIG_TI_SECURE_DEVICE |
| |
| /* Give zero values if not already defined */ |
| #ifndef TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ |
| #define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ (0) |
| #endif |
| #ifndef CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ |
| #define CONFIG_SECURE_RUNTIME_RESV_SRAM_SZ (0) |
| #endif |
| |
| int ft_hs_disable_rng(void *fdt, bd_t *bd) |
| { |
| const char *path; |
| int offs; |
| int ret; |
| |
| /* Make HW RNG reserved for secure world use */ |
| path = "/ocp/rng"; |
| offs = fdt_path_offset(fdt, path); |
| if (offs < 0) { |
| debug("Node %s not found.\n", path); |
| return 0; |
| } |
| ret = fdt_setprop_string(fdt, offs, |
| "status", "disabled"); |
| if (ret < 0) { |
| printf("Could not add status property to node %s: %s\n", |
| path, fdt_strerror(ret)); |
| return ret; |
| } |
| return 0; |
| } |
| |
| #if (CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE != 0) |
| /* |
| * fdt_pack_reg - pack address and size array into the "reg"-suitable stream |
| */ |
| static int fdt_pack_reg(const void *fdt, void *buf, u64 address, u64 size) |
| { |
| int address_cells = fdt_address_cells(fdt, 0); |
| int size_cells = fdt_size_cells(fdt, 0); |
| char *p = buf; |
| |
| if (address_cells == 2) |
| *(fdt64_t *)p = cpu_to_fdt64(address); |
| else |
| *(fdt32_t *)p = cpu_to_fdt32(address); |
| p += 4 * address_cells; |
| |
| if (size_cells == 2) |
| *(fdt64_t *)p = cpu_to_fdt64(size); |
| else |
| *(fdt32_t *)p = cpu_to_fdt32(size); |
| p += 4 * size_cells; |
| |
| return p - (char *)buf; |
| } |
| |
| int ft_hs_fixup_dram(void *fdt, bd_t *bd) |
| { |
| const char *path, *subpath; |
| int offs, len; |
| u32 sec_mem_start = get_sec_mem_start(); |
| u32 sec_mem_size = CONFIG_TI_SECURE_EMIF_TOTAL_REGION_SIZE; |
| fdt32_t address_cells = cpu_to_fdt32(fdt_address_cells(fdt, 0)); |
| fdt32_t size_cells = cpu_to_fdt32(fdt_size_cells(fdt, 0)); |
| u8 temp[16]; /* Up to 64-bit address + 64-bit size */ |
| |
| /* Delete any original secure_reserved node */ |
| path = "/reserved-memory/secure_reserved"; |
| offs = fdt_path_offset(fdt, path); |
| if (offs >= 0) |
| fdt_del_node(fdt, offs); |
| |
| /* Add new secure_reserved node */ |
| path = "/reserved-memory"; |
| offs = fdt_path_offset(fdt, path); |
| if (offs < 0) { |
| debug("Node %s not found\n", path); |
| path = "/"; |
| subpath = "reserved-memory"; |
| offs = fdt_path_offset(fdt, path); |
| offs = fdt_add_subnode(fdt, offs, subpath); |
| if (offs < 0) { |
| printf("Could not create %s%s node.\n", path, subpath); |
| return 1; |
| } |
| path = "/reserved-memory"; |
| offs = fdt_path_offset(fdt, path); |
| |
| fdt_setprop(fdt, offs, "#address-cells", &address_cells, sizeof(address_cells)); |
| fdt_setprop(fdt, offs, "#size-cells", &size_cells, sizeof(size_cells)); |
| fdt_setprop(fdt, offs, "ranges", NULL, 0); |
| } |
| |
| subpath = "secure_reserved"; |
| offs = fdt_add_subnode(fdt, offs, subpath); |
| if (offs < 0) { |
| printf("Could not create %s%s node.\n", path, subpath); |
| return 1; |
| } |
| |
| fdt_setprop_string(fdt, offs, "compatible", "ti,secure-memory"); |
| fdt_setprop_string(fdt, offs, "status", "okay"); |
| fdt_setprop(fdt, offs, "no-map", NULL, 0); |
| len = fdt_pack_reg(fdt, temp, sec_mem_start, sec_mem_size); |
| fdt_setprop(fdt, offs, "reg", temp, len); |
| |
| return 0; |
| } |
| #else |
| int ft_hs_fixup_dram(void *fdt, bd_t *bd) { return 0; } |
| #endif |
| |
| int ft_hs_add_tee(void *fdt, bd_t *bd) |
| { |
| const char *path, *subpath; |
| int offs; |
| |
| extern int tee_loaded; |
| if (!tee_loaded) |
| return 0; |
| |
| path = "/firmware"; |
| offs = fdt_path_offset(fdt, path); |
| if (offs < 0) { |
| path = "/"; |
| offs = fdt_path_offset(fdt, path); |
| if (offs < 0) { |
| printf("Could not find root node.\n"); |
| return 1; |
| } |
| |
| subpath = "firmware"; |
| offs = fdt_add_subnode(fdt, offs, subpath); |
| if (offs < 0) { |
| printf("Could not create %s node.\n", subpath); |
| return 1; |
| } |
| } |
| |
| subpath = "optee"; |
| offs = fdt_add_subnode(fdt, offs, subpath); |
| if (offs < 0) { |
| printf("Could not create %s node.\n", subpath); |
| return 1; |
| } |
| |
| fdt_setprop_string(fdt, offs, "compatible", "linaro,optee-tz"); |
| fdt_setprop_string(fdt, offs, "method", "smc"); |
| |
| return 0; |
| } |
| |
| #endif |