| CONFIG_ARM=y |
| CONFIG_SYS_L2CACHE_OFF=y |
| CONFIG_ARCH_TEGRA=y |
| CONFIG_TEXT_BASE=0x00110000 |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_ENV_SIZE=0x2000 |
| CONFIG_ENV_OFFSET=0x1FFE0000 |
| CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide" |
| CONFIG_SPL_TEXT_BASE=0x00108000 |
| CONFIG_SPL_STACK=0xffffc |
| CONFIG_TEGRA20=y |
| CONFIG_TARGET_MEDCOM_WIDE=y |
| CONFIG_TEGRA_ENABLE_UARTD=y |
| CONFIG_SYS_LOAD_ADDR=0x1000000 |
| CONFIG_FIT=y |
| CONFIG_OF_SYSTEM_SETUP=y |
| CONFIG_SYS_PBSIZE=2089 |
| CONFIG_SYS_STDIO_DEREGISTER=y |
| CONFIG_SPL_FOOTPRINT_LIMIT=y |
| CONFIG_SPL_MAX_FOOTPRINT=0x8000 |
| # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set |
| CONFIG_SPL_SYS_MALLOC=y |
| CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y |
| CONFIG_SPL_CUSTOM_SYS_MALLOC_ADDR=0x90000 |
| CONFIG_SPL_SYS_MALLOC_SIZE=0x10000 |
| CONFIG_SYS_PROMPT="Tegra20 (Medcom-Wide) # " |
| CONFIG_SYS_MAXARGS=64 |
| # CONFIG_CMD_IMI is not set |
| # CONFIG_CMD_FLASH is not set |
| CONFIG_CMD_GPIO=y |
| CONFIG_CMD_MMC=y |
| CONFIG_CMD_USB=y |
| # CONFIG_CMD_SETEXPR is not set |
| CONFIG_CMD_PMIC=y |
| CONFIG_CMD_REGULATOR=y |
| CONFIG_CMD_EXT4_WRITE=y |
| # CONFIG_SPL_DOS_PARTITION is not set |
| # CONFIG_SPL_EFI_PARTITION is not set |
| CONFIG_ENV_OVERWRITE=y |
| CONFIG_ENV_IS_IN_NAND=y |
| CONFIG_SYS_RELOC_GD_ENV_ADDR=y |
| CONFIG_MTD=y |
| CONFIG_MTD_RAW_NAND=y |
| CONFIG_TEGRA_NAND=y |
| CONFIG_SYS_NAND_ONFI_DETECTION=y |
| CONFIG_DM_PMIC=y |
| CONFIG_DM_REGULATOR=y |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_PWM_TEGRA=y |
| CONFIG_SYS_NS16550=y |
| CONFIG_USB=y |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_EHCI_TEGRA=y |
| CONFIG_USB_HOST_ETHER=y |
| CONFIG_USB_ETHER_SMSC95XX=y |
| CONFIG_VIDEO=y |
| # CONFIG_VIDEO_BPP8 is not set |
| CONFIG_VIDEO_TEGRA20=y |