| /* SPDX-License-Identifier: GPL-2.0+ */ |
| /* |
| * Copyright 2019 NXP |
| */ |
| |
| #ifndef __LS1028A_RDB_H |
| #define __LS1028A_RDB_H |
| |
| #include "ls1028a_common.h" |
| |
| #define CONFIG_SYS_CLK_FREQ 100000000 |
| #define CONFIG_DDR_CLK_FREQ 100000000 |
| #define COUNTER_FREQUENCY_REAL (CONFIG_SYS_CLK_FREQ / 4) |
| |
| #define CONFIG_SYS_RTC_BUS_NUM 0 |
| |
| /* Store environment at top of flash */ |
| #define CONFIG_ENV_SIZE 0x2000 |
| |
| #define CONFIG_DIMM_SLOTS_PER_CTLR 1 |
| |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE |
| |
| #define CONFIG_QIXIS_I2C_ACCESS |
| #define CONFIG_SYS_I2C_EARLY_INIT |
| |
| /* |
| * QIXIS Definitions |
| */ |
| #define CONFIG_FSL_QIXIS |
| |
| #ifdef CONFIG_FSL_QIXIS |
| #define QIXIS_BASE 0x7fb00000 |
| #define QIXIS_BASE_PHYS QIXIS_BASE |
| #define CONFIG_SYS_I2C_FPGA_ADDR 0x66 |
| #define QIXIS_LBMAP_SWITCH 2 |
| #define QIXIS_LBMAP_MASK 0xe0 |
| #define QIXIS_LBMAP_SHIFT 0x5 |
| #define QIXIS_LBMAP_DFLTBANK 0x00 |
| #define QIXIS_LBMAP_ALTBANK 0x00 |
| #define QIXIS_LBMAP_SD 0x00 |
| #define QIXIS_LBMAP_EMMC 0x00 |
| #define QIXIS_LBMAP_QSPI 0x00 |
| #define QIXIS_RCW_SRC_SD 0xf8 |
| #define QIXIS_RCW_SRC_EMMC 0xf9 |
| #define QIXIS_RCW_SRC_QSPI 0xff |
| #define QIXIS_RST_CTL_RESET 0x31 |
| #define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x10 |
| #define QIXIS_RCFG_CTL_RECONFIG_START 0x11 |
| #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 |
| #define QIXIS_RST_FORCE_MEM 0x01 |
| |
| #define CONFIG_SYS_FPGA_CSPR_EXT (0x0) |
| #define CONFIG_SYS_FPGA_CSPR (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \ |
| CSPR_PORT_SIZE_8 | \ |
| CSPR_MSEL_GPCM | \ |
| CSPR_V) |
| #define CONFIG_SYS_FPGA_CSOR (CSOR_NOR_ADM_SHIFT(4) | \ |
| CSOR_NOR_NOR_MODE_AVD_NOR | \ |
| CSOR_NOR_TRHZ_80) |
| #endif |
| |
| /* SATA */ |
| #ifndef CONFIG_CMD_EXT2 |
| #define CONFIG_CMD_EXT2 |
| #endif |
| #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 |
| #define CONFIG_SYS_SCSI_MAX_LUN 1 |
| #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ |
| CONFIG_SYS_SCSI_MAX_LUN) |
| #define SCSI_VEND_ID 0x1b4b |
| #define SCSI_DEV_ID 0x9170 |
| #define CONFIG_SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID} |
| #define CONFIG_SCSI_AHCI_PLAT |
| #define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 |
| |
| #endif /* __LS1028A_RDB_H */ |