blob: f299cc06d327d946f1a88b06f413cd1bc65dda4d [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*
* Configuration settings for the MX51EVK Board
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
#include <asm/arch/imx-regs.h>
/*
* Hardware drivers
*/
#define CONFIG_FSL_IIM
#define CONFIG_MXC_UART_BASE UART1_BASE
/* PMIC Controller */
#define CONFIG_POWER_SPI
#define CONFIG_POWER_FSL
#define CONFIG_FSL_PMIC_BUS 0
#define CONFIG_FSL_PMIC_CS 0
#define CONFIG_FSL_PMIC_CLK 2500000
#define CONFIG_FSL_PMIC_MODE (SPI_MODE_0 | SPI_CS_HIGH)
#define CONFIG_FSL_PMIC_BITLEN 32
#define CONFIG_RTC_MC13XXX
/*
* MMC Configs
* */
#define CONFIG_SYS_FSL_ESDHC_ADDR MMC_SDHC1_BASE_ADDR
#define CONFIG_SYS_FSL_ESDHC_NUM 2
/* USB Configs */
#define CONFIG_MXC_USB_PORT 1
#define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI
#define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED
/* Framebuffer and LCD */
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"fdt_file=imx51-babbage.dtb\0" \
"fdt_addr=0x91000000\0" \
"boot_fdt=try\0" \
"ip_dyn=yes\0" \
"mmcdev=0\0" \
"mmcpart=1\0" \
"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
"mmcargs=setenv bootargs console=ttymxc0,${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=ttymxc0,${baudrate} " \
"root=/dev/nfs " \
"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
"netboot=echo Booting from net ...; " \
"run netargs; " \
"if test ${ip_dyn} = yes; then " \
"setenv get_cmd dhcp; " \
"else " \
"setenv get_cmd tftp; " \
"fi; " \
"${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
"bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
"bootz; " \
"else " \
"echo ERROR: Cannot load the DT; " \
"exit; " \
"fi; " \
"fi; " \
"else " \
"bootz; " \
"fi;\0"
/*
* Miscellaneous configurable options
*/
/*-----------------------------------------------------------------------
* Physical Memory Map
*/
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#define CONFIG_SYS_DDR_CLKSEL 0
#define CONFIG_SYS_CLKTL_CBCDR 0x59E35100
#define CONFIG_SYS_MAIN_PWR_ON
/*-----------------------------------------------------------------------
* environment organization
*/
/*
* Environment starts at CONFIG_ENV_OFFSET=0xC0000 = 768k = 768 * 1024 = 786432
*
* Detect overlap between U-Boot image and environment area in build-time
*
* CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
* CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
*
* Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
* write the direct value here
*/
#define CONFIG_BOARD_SIZE_LIMIT 785408
#endif