| menu "mpc8xx CPU" |
| depends on 8xx |
| |
| config SYS_CPU |
| default "mpc8xx" |
| |
| choice |
| prompt "Target select" |
| optional |
| |
| config TARGET_MCR3000 |
| bool "Support MCR3000 board from CSSI" |
| |
| endchoice |
| |
| choice |
| prompt "CPU select" |
| default MPC866 |
| |
| config MPC866 |
| bool "MPC866" |
| |
| config MPC885 |
| bool "MPC885" |
| |
| endchoice |
| |
| config 8xx_GCLK_FREQ |
| int "CPU GCLK Frequency" |
| |
| comment "Specific commands" |
| |
| config CMD_IMMAP |
| bool "Enable various commands to dump IMMR information" |
| help |
| This enables various commands such as: |
| |
| siuinfo - print System Interface Unit (SIU) registers |
| memcinfo - print Memory Controller registers |
| |
| comment "Configuration Registers" |
| |
| config SYS_SIUMCR |
| hex "SIUMCR register" |
| help |
| SIU Module Configuration (11-6) |
| |
| config SYS_SYPCR |
| hex "SYPCR register" |
| help |
| System Protection Control (11-9) |
| |
| config SYS_TBSCR |
| hex "TBSCR register" |
| help |
| Time Base Status and Control (11-26) |
| |
| config SYS_PISCR |
| hex "PISCR register" |
| help |
| Periodic Interrupt Status and Control (11-31) |
| |
| config SYS_PLPRCR_BOOL |
| bool "Customise PLPRCR" |
| |
| config SYS_PLPRCR |
| hex "PLPRCR register" |
| depends on SYS_PLPRCR_BOOL |
| help |
| PLL, Low-Power, and Reset Control Register (15-30) |
| |
| config SYS_SCCR |
| hex "SCCR register" |
| help |
| System Clock and reset Control Register (15-27) |
| |
| config SYS_SCCR_MASK |
| hex "MASK for setting SCCR register" |
| |
| config SYS_DER |
| hex "DER register" |
| help |
| Debug Event Register (37-47) |
| |
| comment "Memory mapping" |
| |
| config SYS_BR0_PRELIM |
| hex "Preliminary value for BR0" |
| |
| config SYS_OR0_PRELIM |
| hex "Preliminary value for OR0" |
| |
| config SYS_BR1_PRELIM_BOOL |
| bool "Define Bank 1" |
| |
| config SYS_BR1_PRELIM |
| hex "Preliminary value for BR1" |
| depends on SYS_BR1_PRELIM_BOOL |
| |
| config SYS_OR1_PRELIM |
| hex "Preliminary value for OR1" |
| depends on SYS_BR1_PRELIM_BOOL |
| |
| config SYS_BR2_PRELIM_BOOL |
| bool "Define Bank 2" |
| |
| config SYS_BR2_PRELIM |
| hex "Preliminary value for BR2" |
| depends on SYS_BR2_PRELIM_BOOL |
| |
| config SYS_OR2_PRELIM |
| hex "Preliminary value for OR2" |
| depends on SYS_BR2_PRELIM_BOOL |
| |
| config SYS_BR3_PRELIM_BOOL |
| bool "Define Bank 3" |
| |
| config SYS_BR3_PRELIM |
| hex "Preliminary value for BR3" |
| depends on SYS_BR3_PRELIM_BOOL |
| |
| config SYS_OR3_PRELIM |
| hex "Preliminary value for OR3" |
| depends on SYS_BR3_PRELIM_BOOL |
| |
| config SYS_BR4_PRELIM_BOOL |
| bool "Define Bank 4" |
| |
| config SYS_BR4_PRELIM |
| hex "Preliminary value for BR4" |
| depends on SYS_BR4_PRELIM_BOOL |
| |
| config SYS_OR4_PRELIM |
| hex "Preliminary value for OR4" |
| depends on SYS_BR4_PRELIM_BOOL |
| |
| config SYS_BR5_PRELIM_BOOL |
| bool "Define Bank 5" |
| |
| config SYS_BR5_PRELIM |
| hex "Preliminary value for BR5" |
| depends on SYS_BR5_PRELIM_BOOL |
| |
| config SYS_OR5_PRELIM |
| hex "Preliminary value for OR5" |
| depends on SYS_BR5_PRELIM_BOOL |
| |
| config SYS_BR6_PRELIM_BOOL |
| bool "Define Bank 6" |
| |
| config SYS_BR6_PRELIM |
| hex "Preliminary value for BR6" |
| depends on SYS_BR6_PRELIM_BOOL |
| |
| config SYS_OR6_PRELIM |
| hex "Preliminary value for OR6" |
| depends on SYS_BR6_PRELIM_BOOL |
| |
| config SYS_BR7_PRELIM_BOOL |
| bool "Define Bank 7" |
| |
| config SYS_BR7_PRELIM |
| hex "Preliminary value for BR7" |
| depends on SYS_BR7_PRELIM_BOOL |
| |
| config SYS_OR7_PRELIM |
| hex "Preliminary value for OR7" |
| depends on SYS_BR7_PRELIM_BOOL |
| |
| config SYS_IMMR |
| hex "Value for IMMR" |
| |
| source "board/cssi/MCR3000/Kconfig" |
| |
| endmenu |