| /* |
| * Copyright 2011-2012 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/processor.h> |
| #include <asm/mmu.h> |
| #include <asm/cache.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/io.h> |
| #include <miiphy.h> |
| #include <libfdt.h> |
| #include <fdt_support.h> |
| #include <fsl_mdio.h> |
| #include <tsec.h> |
| #include <jffs2/load_kernel.h> |
| #include <mtd_node.h> |
| #include <flash.h> |
| #include <netdev.h> |
| |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int board_early_init_f(void) |
| { |
| ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; |
| |
| clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_CTS_B0_GPIO42); |
| setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_CTS_B0_DSP_TMS); |
| |
| clrbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_RTS_B0_GPIO43); |
| setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_UART_RTS_B0_DSP_TCK | |
| MPC85xx_PMUXCR2_UART_CTS_B1_SIM_PD); |
| setbits_be32(&gur->halt_req_mask, HALTED_TO_HALT_REQ_MASK_0); |
| clrsetbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_IFC_AD_GPIO_MASK | |
| MPC85xx_PMUXCR_IFC_AD17_GPO_MASK, |
| MPC85xx_PMUXCR_IFC_AD_GPIO | |
| MPC85xx_PMUXCR_IFC_AD17_GPO | MPC85xx_PMUXCR_SDHC_USIM); |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| struct cpu_type *cpu; |
| |
| cpu = gd->arch.cpu; |
| printf("Board: %sRDB\n", cpu->name); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF_BOARD_SETUP) |
| #ifdef CONFIG_FDT_FIXUP_PARTITIONS |
| struct node_info nodes[] = { |
| { "fsl,ifc-nand", MTD_DEV_TYPE_NAND, }, |
| }; |
| #endif |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| phys_addr_t base; |
| phys_size_t size; |
| |
| ft_cpu_setup(blob, bd); |
| |
| base = env_get_bootm_low(); |
| size = env_get_bootm_size(); |
| |
| fdt_fixup_memory(blob, (u64)base, (u64)size); |
| #ifdef CONFIG_FDT_FIXUP_PARTITIONS |
| fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); |
| #endif |
| |
| fsl_fdt_fixup_dr_usb(blob, bd); |
| |
| return 0; |
| } |
| #endif |