| /* |
| * SH7780 PCI Controller (PCIC) for U-Boot. |
| * (C) Dustin McIntire (dustin@sensoria.com) |
| * (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org> |
| * (C) 2008 Yusuke Goda <goda.yusuke@renesas.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| |
| #include <asm/processor.h> |
| #include <asm/io.h> |
| #include <pci.h> |
| |
| #define SH7780_VENDOR_ID 0x1912 |
| #define SH7780_DEVICE_ID 0x0002 |
| #define SH7780_PCICR_PREFIX 0xA5000000 |
| #define SH7780_PCICR_PFCS 0x00000800 |
| #define SH7780_PCICR_FTO 0x00000400 |
| #define SH7780_PCICR_PFE 0x00000200 |
| #define SH7780_PCICR_TBS 0x00000100 |
| #define SH7780_PCICR_ARBM 0x00000040 |
| #define SH7780_PCICR_IOCS 0x00000004 |
| #define SH7780_PCICR_PRST 0x00000002 |
| #define SH7780_PCICR_CFIN 0x00000001 |
| |
| #define p4_in(addr) *((vu_long *)addr) |
| #define p4_out(data,addr) *(vu_long *)(addr) = (data) |
| #define p4_inw(addr) *((vu_short *)addr) |
| #define p4_outw(data,addr) *(vu_short *)(addr) = (data) |
| |
| int pci_sh4_read_config_dword(struct pci_controller *hose, |
| pci_dev_t dev, int offset, u32 *value) |
| { |
| u32 par_data = 0x80000000 | dev; |
| |
| p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); |
| *value = p4_in(SH7780_PCIPDR); |
| |
| return 0; |
| } |
| |
| int pci_sh4_write_config_dword(struct pci_controller *hose, |
| pci_dev_t dev, int offset, u32 value) |
| { |
| u32 par_data = 0x80000000 | dev; |
| |
| p4_out(par_data | (offset & 0xfc), SH7780_PCIPAR); |
| p4_out(value, SH7780_PCIPDR); |
| return 0; |
| } |
| |
| int pci_sh7780_init(struct pci_controller *hose) |
| { |
| p4_out(0x01, SH7780_PCIECR); |
| |
| if (p4_inw(SH7780_PCIVID) != SH7780_VENDOR_ID |
| && p4_inw(SH7780_PCIDID) != SH7780_DEVICE_ID){ |
| printf("PCI: Unknown PCI host bridge.\n"); |
| return; |
| } |
| printf("PCI: SH7780 PCI host bridge found.\n"); |
| |
| /* Toggle PCI reset pin */ |
| p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_PRST), SH7780_PCICR); |
| udelay(100000); |
| p4_out(SH7780_PCICR_PREFIX, SH7780_PCICR); |
| p4_outw(0x0047, SH7780_PCICMD); |
| |
| p4_out(0x07F00001, SH7780_PCILSR0); |
| p4_out(0x08000000, SH7780_PCILAR0); |
| p4_out(0x00000000, SH7780_PCILSR1); |
| p4_out(0, SH7780_PCILAR1); |
| p4_out(0x08000000, SH7780_PCIMBAR0); |
| p4_out(0x00000000, SH7780_PCIMBAR1); |
| |
| p4_out(0xFD000000, SH7780_PCIMBR0); |
| p4_out(0x00FC0000, SH7780_PCIMBMR0); |
| |
| /* if use Operand Cache then enable PCICSCR Soonp bits. */ |
| p4_out(0x08000000, SH7780_PCICSAR0); |
| p4_out(0x0000001B, SH7780_PCICSCR0); /* Snoop bit :On */ |
| |
| p4_out((SH7780_PCICR_PREFIX | SH7780_PCICR_CFIN | SH7780_PCICR_ARBM |
| | SH7780_PCICR_FTO | SH7780_PCICR_PFCS | SH7780_PCICR_PFE), |
| SH7780_PCICR); |
| |
| pci_sh4_init(hose); |
| return 0; |
| } |