blob: f0a0a51d73c051163da67cc806f1e3e7d0869355 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Device Tree Source for the Condor board
*
* Copyright (C) 2018 Renesas Electronics Corp.
* Copyright (C) 2018 Cogent Embedded, Inc.
*/
/dts-v1/;
#include "r8a77980.dtsi"
/ {
model = "Renesas Condor board based on r8a77980";
compatible = "renesas,condor", "renesas,r8a77980";
aliases {
serial0 = &scif0;
ethernet0 = &gether;
};
chosen {
stdout-path = "serial0:115200n8";
};
d1_8v: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "D1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
d3_3v: regulator-0 {
compatible = "regulator-fixed";
regulator-name = "D3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
hdmi-out {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con: endpoint {
remote-endpoint = <&adv7511_out>;
};
};
};
lvds-decoder {
compatible = "thine,thc63lvd1024";
vcc-supply = <&d3_3v>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
thc63lvd1024_in: endpoint {
remote-endpoint = <&lvds0_out>;
};
};
port@2 {
reg = <2>;
thc63lvd1024_out: endpoint {
remote-endpoint = <&adv7511_in>;
};
};
};
};
memory@48000000 {
device_type = "memory";
/* first 128MB is reserved for secure area. */
reg = <0 0x48000000 0 0x78000000>;
};
vddq_vin01: regulator-1 {
compatible = "regulator-fixed";
regulator-name = "VDDQ_VIN01";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
};
x1_clk: x1-clock {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <148500000>;
};
};
&canfd {
pinctrl-0 = <&canfd0_pins>;
pinctrl-names = "default";
status = "okay";
channel0 {
status = "okay";
};
};
&du {
clocks = <&cpg CPG_MOD 724>,
<&x1_clk>;
clock-names = "du.0", "dclkin.0";
status = "okay";
};
&extal_clk {
clock-frequency = <16666666>;
};
&extalr_clk {
clock-frequency = <32768>;
};
&gether {
pinctrl-0 = <&gether_pins>;
pinctrl-names = "default";
phy-mode = "rgmii-id";
phy-handle = <&phy0>;
renesas,no-ether-link;
status = "okay";
phy0: ethernet-phy@0 {
rxc-skew-ps = <1500>;
reg = <0>;
interrupt-parent = <&gpio4>;
interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2c0 {
pinctrl-0 = <&i2c0_pins>;
pinctrl-names = "default";
status = "okay";
clock-frequency = <400000>;
io_expander0: gpio@20 {
compatible = "onnn,pca9654";
reg = <0x20>;
gpio-controller;
#gpio-cells = <2>;
};
io_expander1: gpio@21 {
compatible = "onnn,pca9654";
reg = <0x21>;
gpio-controller;
#gpio-cells = <2>;
};
hdmi@39 {
compatible = "adi,adv7511w";
reg = <0x39>;
interrupt-parent = <&gpio1>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
avdd-supply = <&d1_8v>;
dvdd-supply = <&d1_8v>;
pvdd-supply = <&d1_8v>;
bgvdd-supply = <&d1_8v>;
dvdd-3v-supply = <&d3_3v>;
adi,input-depth = <8>;
adi,input-colorspace = "rgb";
adi,input-clock = "1x";
adi,input-style = <1>;
adi,input-justification = "evenly";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
adv7511_in: endpoint {
remote-endpoint = <&thc63lvd1024_out>;
};
};
port@1 {
reg = <1>;
adv7511_out: endpoint {
remote-endpoint = <&hdmi_con>;
};
};
};
};
};
&lvds0 {
status = "okay";
ports {
port@1 {
lvds0_out: endpoint {
remote-endpoint = <&thc63lvd1024_in>;
};
};
};
};
&mmc0 {
pinctrl-0 = <&mmc_pins>;
pinctrl-1 = <&mmc_pins>;
pinctrl-names = "default", "state_uhs";
vmmc-supply = <&d3_3v>;
vqmmc-supply = <&vddq_vin01>;
mmc-hs200-1_8v;
bus-width = <8>;
non-removable;
status = "okay";
};
&pciec {
status = "okay";
};
&pcie_bus_clk {
clock-frequency = <100000000>;
};
&pcie_phy {
status = "okay";
};
&pfc {
canfd0_pins: canfd0 {
groups = "canfd0_data_a";
function = "canfd0";
};
gether_pins: gether {
groups = "gether_mdio_a", "gether_rgmii",
"gether_txcrefclk", "gether_txcrefclk_mega";
function = "gether";
};
i2c0_pins: i2c0 {
groups = "i2c0";
function = "i2c0";
};
mmc_pins: mmc {
groups = "mmc_data8", "mmc_ctrl", "mmc_ds";
function = "mmc";
power-source = <1800>;
};
scif0_pins: scif0 {
groups = "scif0_data";
function = "scif0";
};
scif_clk_pins: scif_clk {
groups = "scif_clk_b";
function = "scif_clk";
};
};
&rwdt {
timeout-sec = <60>;
status = "okay";
};
&scif0 {
pinctrl-0 = <&scif0_pins>, <&scif_clk_pins>;
pinctrl-names = "default";
status = "okay";
};
&scif_clk {
clock-frequency = <14745600>;
};