blob: f9cadcc026dcdb6e78ad12b1a8c6491f1409d281 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
*/
#include <errno.h>
#include <log.h>
#include <malloc.h>
#include <spi.h>
#include <spi-mem.h>
int spi_mem_exec_op(struct spi_slave *slave,
const struct spi_mem_op *op)
{
unsigned int pos = 0;
const u8 *tx_buf = NULL;
u8 *rx_buf = NULL;
u8 *op_buf;
int op_len;
u32 flag;
int ret;
int i;
if (op->data.nbytes) {
if (op->data.dir == SPI_MEM_DATA_IN)
rx_buf = op->data.buf.in;
else
tx_buf = op->data.buf.out;
}
op_len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
op_buf = calloc(1, op_len);
ret = spi_claim_bus(slave);
if (ret < 0)
return ret;
op_buf[pos++] = op->cmd.opcode;
if (op->addr.nbytes) {
for (i = 0; i < op->addr.nbytes; i++)
op_buf[pos + i] = op->addr.val >>
(8 * (op->addr.nbytes - i - 1));
pos += op->addr.nbytes;
}
if (op->dummy.nbytes)
memset(op_buf + pos, 0xff, op->dummy.nbytes);
/* 1st transfer: opcode + address + dummy cycles */
flag = SPI_XFER_BEGIN;
/* Make sure to set END bit if no tx or rx data messages follow */
if (!tx_buf && !rx_buf)
flag |= SPI_XFER_END;
ret = spi_xfer(slave, op_len * 8, op_buf, NULL, flag);
if (ret)
return ret;
/* 2nd transfer: rx or tx data path */
if (tx_buf || rx_buf) {
ret = spi_xfer(slave, op->data.nbytes * 8, tx_buf,
rx_buf, SPI_XFER_END);
if (ret)
return ret;
}
spi_release_bus(slave);
for (i = 0; i < pos; i++)
debug("%02x ", op_buf[i]);
debug("| [%dB %s] ",
tx_buf || rx_buf ? op->data.nbytes : 0,
tx_buf || rx_buf ? (tx_buf ? "out" : "in") : "-");
for (i = 0; i < op->data.nbytes; i++)
debug("%02x ", tx_buf ? tx_buf[i] : rx_buf[i]);
debug("[ret %d]\n", ret);
free(op_buf);
if (ret < 0)
return ret;
return 0;
}
int spi_mem_adjust_op_size(struct spi_slave *slave,
struct spi_mem_op *op)
{
unsigned int len;
len = op->cmd.nbytes + op->addr.nbytes + op->dummy.nbytes;
if (slave->max_write_size && len > slave->max_write_size)
return -EINVAL;
if (op->data.dir == SPI_MEM_DATA_IN) {
if (slave->max_read_size)
op->data.nbytes = min(op->data.nbytes,
slave->max_read_size);
} else if (slave->max_write_size) {
op->data.nbytes = min(op->data.nbytes,
slave->max_write_size - len);
}
if (!op->data.nbytes)
return -EINVAL;
return 0;
}
static int spi_check_buswidth_req(struct spi_slave *slave, u8 buswidth, bool tx)
{
u32 mode = slave->mode;
switch (buswidth) {
case 1:
return 0;
case 2:
if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
(!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
return 0;
break;
case 4:
if ((tx && (mode & SPI_TX_QUAD)) ||
(!tx && (mode & SPI_RX_QUAD)))
return 0;
break;
case 8:
if ((tx && (mode & SPI_TX_OCTAL)) ||
(!tx && (mode & SPI_RX_OCTAL)))
return 0;
break;
default:
break;
}
return -ENOTSUPP;
}
bool spi_mem_supports_op(struct spi_slave *slave, const struct spi_mem_op *op)
{
if (spi_check_buswidth_req(slave, op->cmd.buswidth, true))
return false;
if (op->addr.nbytes &&
spi_check_buswidth_req(slave, op->addr.buswidth, true))
return false;
if (op->dummy.nbytes &&
spi_check_buswidth_req(slave, op->dummy.buswidth, true))
return false;
if (op->data.nbytes &&
spi_check_buswidth_req(slave, op->data.buswidth,
op->data.dir == SPI_MEM_DATA_OUT))
return false;
if (op->cmd.dtr || op->addr.dtr || op->dummy.dtr || op->data.dtr)
return false;
if (op->cmd.nbytes != 1)
return false;
return true;
}