| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2009-2012 ADVANSEE |
| * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> |
| * |
| * Based on the Linux rtc-imxdi.c driver, which is: |
| * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved. |
| * Copyright 2010 Orex Computed Radiography |
| */ |
| |
| /* |
| * Date & Time support for Freescale i.MX DryIce RTC |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <linux/compat.h> |
| #include <rtc.h> |
| |
| #if defined(CONFIG_CMD_DATE) |
| |
| #include <asm/io.h> |
| #include <asm/arch/imx-regs.h> |
| |
| /* DryIce Register Definitions */ |
| |
| struct imxdi_regs { |
| u32 dtcmr; /* Time Counter MSB Reg */ |
| u32 dtclr; /* Time Counter LSB Reg */ |
| u32 dcamr; /* Clock Alarm MSB Reg */ |
| u32 dcalr; /* Clock Alarm LSB Reg */ |
| u32 dcr; /* Control Reg */ |
| u32 dsr; /* Status Reg */ |
| u32 dier; /* Interrupt Enable Reg */ |
| }; |
| |
| #define DCAMR_UNSET 0xFFFFFFFF /* doomsday - 1 sec */ |
| |
| #define DCR_TCE (1 << 3) /* Time Counter Enable */ |
| |
| #define DSR_WBF (1 << 10) /* Write Busy Flag */ |
| #define DSR_WNF (1 << 9) /* Write Next Flag */ |
| #define DSR_WCF (1 << 8) /* Write Complete Flag */ |
| #define DSR_WEF (1 << 7) /* Write Error Flag */ |
| #define DSR_CAF (1 << 4) /* Clock Alarm Flag */ |
| #define DSR_NVF (1 << 1) /* Non-Valid Flag */ |
| #define DSR_SVF (1 << 0) /* Security Violation Flag */ |
| |
| #define DIER_WNIE (1 << 9) /* Write Next Interrupt Enable */ |
| #define DIER_WCIE (1 << 8) /* Write Complete Interrupt Enable */ |
| #define DIER_WEIE (1 << 7) /* Write Error Interrupt Enable */ |
| #define DIER_CAIE (1 << 4) /* Clock Alarm Interrupt Enable */ |
| |
| /* Driver Private Data */ |
| |
| struct imxdi_data { |
| struct imxdi_regs __iomem *regs; |
| int init_done; |
| }; |
| |
| static struct imxdi_data data; |
| |
| /* |
| * This function attempts to clear the dryice write-error flag. |
| * |
| * A dryice write error is similar to a bus fault and should not occur in |
| * normal operation. Clearing the flag requires another write, so the root |
| * cause of the problem may need to be fixed before the flag can be cleared. |
| */ |
| static void clear_write_error(void) |
| { |
| int cnt; |
| |
| puts("### Warning: RTC - Register write error!\n"); |
| |
| /* clear the write error flag */ |
| __raw_writel(DSR_WEF, &data.regs->dsr); |
| |
| /* wait for it to take effect */ |
| for (cnt = 0; cnt < 1000; cnt++) { |
| if ((__raw_readl(&data.regs->dsr) & DSR_WEF) == 0) |
| return; |
| udelay(10); |
| } |
| puts("### Error: RTC - Cannot clear write-error flag!\n"); |
| } |
| |
| /* |
| * Write a dryice register and wait until it completes. |
| * |
| * Use interrupt flags to determine when the write has completed. |
| */ |
| #define DI_WRITE_WAIT(val, reg) \ |
| ( \ |
| /* do the register write */ \ |
| __raw_writel((val), &data.regs->reg), \ |
| \ |
| di_write_wait((val), #reg) \ |
| ) |
| static int di_write_wait(u32 val, const char *reg) |
| { |
| int cnt; |
| int ret = 0; |
| int rc = 0; |
| |
| /* wait for the write to finish */ |
| for (cnt = 0; cnt < 100; cnt++) { |
| if ((__raw_readl(&data.regs->dsr) & (DSR_WCF | DSR_WEF)) != 0) { |
| ret = 1; |
| break; |
| } |
| udelay(10); |
| } |
| if (ret == 0) |
| printf("### Warning: RTC - Write-wait timeout " |
| "val = 0x%.8x reg = %s\n", val, reg); |
| |
| /* check for write error */ |
| if (__raw_readl(&data.regs->dsr) & DSR_WEF) { |
| clear_write_error(); |
| rc = -1; |
| } |
| |
| return rc; |
| } |
| |
| /* |
| * Initialize dryice hardware |
| */ |
| static int di_init(void) |
| { |
| int rc = 0; |
| |
| data.regs = (struct imxdi_regs __iomem *)IMX_DRYICE_BASE; |
| |
| /* mask all interrupts */ |
| __raw_writel(0, &data.regs->dier); |
| |
| /* put dryice into valid state */ |
| if (__raw_readl(&data.regs->dsr) & DSR_NVF) { |
| rc = DI_WRITE_WAIT(DSR_NVF | DSR_SVF, dsr); |
| if (rc) |
| goto err; |
| } |
| |
| /* initialize alarm */ |
| rc = DI_WRITE_WAIT(DCAMR_UNSET, dcamr); |
| if (rc) |
| goto err; |
| rc = DI_WRITE_WAIT(0, dcalr); |
| if (rc) |
| goto err; |
| |
| /* clear alarm flag */ |
| if (__raw_readl(&data.regs->dsr) & DSR_CAF) { |
| rc = DI_WRITE_WAIT(DSR_CAF, dsr); |
| if (rc) |
| goto err; |
| } |
| |
| /* the timer won't count if it has never been written to */ |
| if (__raw_readl(&data.regs->dtcmr) == 0) { |
| rc = DI_WRITE_WAIT(0, dtcmr); |
| if (rc) |
| goto err; |
| } |
| |
| /* start keeping time */ |
| if (!(__raw_readl(&data.regs->dcr) & DCR_TCE)) { |
| rc = DI_WRITE_WAIT(__raw_readl(&data.regs->dcr) | DCR_TCE, dcr); |
| if (rc) |
| goto err; |
| } |
| |
| data.init_done = 1; |
| return 0; |
| |
| err: |
| return rc; |
| } |
| |
| int rtc_get(struct rtc_time *tmp) |
| { |
| unsigned long now; |
| int rc = 0; |
| |
| if (!data.init_done) { |
| rc = di_init(); |
| if (rc) |
| goto err; |
| } |
| |
| now = __raw_readl(&data.regs->dtcmr); |
| rtc_to_tm(now, tmp); |
| |
| err: |
| return rc; |
| } |
| |
| int rtc_set(struct rtc_time *tmp) |
| { |
| unsigned long now; |
| int rc; |
| |
| if (!data.init_done) { |
| rc = di_init(); |
| if (rc) |
| goto err; |
| } |
| |
| now = rtc_mktime(tmp); |
| /* zero the fractional part first */ |
| rc = DI_WRITE_WAIT(0, dtclr); |
| if (rc == 0) |
| rc = DI_WRITE_WAIT(now, dtcmr); |
| |
| err: |
| return rc; |
| } |
| |
| void rtc_reset(void) |
| { |
| di_init(); |
| } |
| |
| #endif |