| // SPDX-License-Identifier: GPL-2.0-or-later OR BSD-3-Clause |
| /* |
| * Copyright (C) 2021, STMicroelectronics - All Rights Reserved |
| */ |
| |
| #define LOG_CATEGORY LOGC_ARCH |
| |
| #include <common.h> |
| #include <env.h> |
| #include <log.h> |
| #include <asm/io.h> |
| #include <asm/arch/bsec.h> |
| #include <asm/arch/stm32.h> |
| #include <asm/arch/sys_proto.h> |
| #include <dm/device.h> |
| #include <dm/uclass.h> |
| |
| /* RCC register */ |
| #define RCC_TZCR (STM32_RCC_BASE + 0x00) |
| #define RCC_BDCR (STM32_RCC_BASE + 0x0140) |
| #define RCC_MP_APB5ENSETR (STM32_RCC_BASE + 0x0208) |
| #define RCC_MP_AHB5ENSETR (STM32_RCC_BASE + 0x0210) |
| #define RCC_DBGCFGR (STM32_RCC_BASE + 0x080C) |
| |
| #define RCC_BDCR_VSWRST BIT(31) |
| #define RCC_BDCR_RTCSRC GENMASK(17, 16) |
| |
| #define RCC_DBGCFGR_DBGCKEN BIT(8) |
| |
| /* DBGMCU register */ |
| #define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00) |
| #define DBGMCU_APB4FZ1 (STM32_DBGMCU_BASE + 0x2C) |
| #define DBGMCU_APB4FZ1_IWDG2 BIT(2) |
| |
| /* Security register */ |
| #define ETZPC_TZMA1_SIZE (STM32_ETZPC_BASE + 0x04) |
| #define ETZPC_DECPROT0 (STM32_ETZPC_BASE + 0x10) |
| |
| #define TZC_GATE_KEEPER (STM32_TZC_BASE + 0x008) |
| #define TZC_REGION_ATTRIBUTE0 (STM32_TZC_BASE + 0x110) |
| #define TZC_REGION_ID_ACCESS0 (STM32_TZC_BASE + 0x114) |
| |
| #define TAMP_CR1 (STM32_TAMP_BASE + 0x00) |
| |
| #define PWR_CR1 (STM32_PWR_BASE + 0x00) |
| #define PWR_MCUCR (STM32_PWR_BASE + 0x14) |
| #define PWR_CR1_DBP BIT(8) |
| #define PWR_MCUCR_SBF BIT(6) |
| |
| /* GPIOZ registers */ |
| #define GPIOZ_SECCFGR 0x54004030 |
| |
| /* DBGMCU register */ |
| #define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00) |
| #define DBGMCU_IDC_DEV_ID_MASK GENMASK(11, 0) |
| #define DBGMCU_IDC_DEV_ID_SHIFT 0 |
| #define DBGMCU_IDC_REV_ID_MASK GENMASK(31, 16) |
| #define DBGMCU_IDC_REV_ID_SHIFT 16 |
| |
| /* boot interface from Bootrom |
| * - boot instance = bit 31:16 |
| * - boot device = bit 15:0 |
| */ |
| #define BOOTROM_PARAM_ADDR 0x2FFC0078 |
| #define BOOTROM_MODE_MASK GENMASK(15, 0) |
| #define BOOTROM_MODE_SHIFT 0 |
| #define BOOTROM_INSTANCE_MASK GENMASK(31, 16) |
| #define BOOTROM_INSTANCE_SHIFT 16 |
| |
| /* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */ |
| #define RPN_SHIFT 0 |
| #define RPN_MASK GENMASK(7, 0) |
| |
| /* Package = bit 27:29 of OTP16 => STM32MP15_PKG defines |
| * - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm |
| * - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm |
| * - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm |
| * - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm |
| * - others: Reserved |
| */ |
| #define PKG_SHIFT 27 |
| #define PKG_MASK GENMASK(2, 0) |
| |
| static void security_init(void) |
| { |
| /* Disable the backup domain write protection */ |
| /* the protection is enable at each reset by hardware */ |
| /* And must be disable by software */ |
| setbits_le32(PWR_CR1, PWR_CR1_DBP); |
| |
| while (!(readl(PWR_CR1) & PWR_CR1_DBP)) |
| ; |
| |
| /* If RTC clock isn't enable so this is a cold boot then we need |
| * to reset the backup domain |
| */ |
| if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) { |
| setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST); |
| while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST)) |
| ; |
| clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST); |
| } |
| |
| /* allow non secure access in Write/Read for all peripheral */ |
| writel(GENMASK(25, 0), ETZPC_DECPROT0); |
| |
| /* Open SYSRAM for no secure access */ |
| writel(0x0, ETZPC_TZMA1_SIZE); |
| |
| /* enable TZC1 TZC2 clock */ |
| writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR); |
| |
| /* Region 0 set to no access by default */ |
| /* bit 0 / 16 => nsaid0 read/write Enable |
| * bit 1 / 17 => nsaid1 read/write Enable |
| * ... |
| * bit 15 / 31 => nsaid15 read/write Enable |
| */ |
| writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0); |
| /* bit 30 / 31 => Secure Global Enable : write/read */ |
| /* bit 0 / 1 => Region Enable for filter 0/1 */ |
| writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0); |
| |
| /* Enable Filter 0 and 1 */ |
| setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1)); |
| |
| /* RCC trust zone deactivated */ |
| writel(0x0, RCC_TZCR); |
| |
| /* TAMP: deactivate the internal tamper |
| * Bit 23 ITAMP8E: monotonic counter overflow |
| * Bit 20 ITAMP5E: RTC calendar overflow |
| * Bit 19 ITAMP4E: HSE monitoring |
| * Bit 18 ITAMP3E: LSE monitoring |
| * Bit 16 ITAMP1E: RTC power domain supply monitoring |
| */ |
| writel(0x0, TAMP_CR1); |
| |
| /* GPIOZ: deactivate the security */ |
| writel(BIT(0), RCC_MP_AHB5ENSETR); |
| writel(0x0, GPIOZ_SECCFGR); |
| } |
| |
| /* |
| * Debug init |
| */ |
| void dbgmcu_init(void) |
| { |
| /* |
| * Freeze IWDG2 if Cortex-A7 is in debug mode |
| * done in TF-A for TRUSTED boot and |
| * DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE |
| */ |
| if (bsec_dbgswenable()) { |
| setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN); |
| setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2); |
| } |
| } |
| |
| void spl_board_init(void) |
| { |
| struct udevice *dev; |
| int ret; |
| |
| dbgmcu_init(); |
| |
| /* force probe of BSEC driver to shadow the upper OTP */ |
| ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(stm32mp_bsec), &dev); |
| if (ret) |
| log_warning("BSEC probe failed: %d\n", ret); |
| } |
| |
| /* get bootmode from ROM code boot context: saved in TAMP register */ |
| static void update_bootmode(void) |
| { |
| u32 boot_mode; |
| u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR); |
| u32 bootrom_device, bootrom_instance; |
| |
| /* enable TAMP clock = RTCAPBEN */ |
| writel(BIT(8), RCC_MP_APB5ENSETR); |
| |
| /* read bootrom context */ |
| bootrom_device = |
| (bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT; |
| bootrom_instance = |
| (bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT; |
| boot_mode = |
| ((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) | |
| ((bootrom_instance << BOOT_INSTANCE_SHIFT) & |
| BOOT_INSTANCE_MASK); |
| |
| /* save the boot mode in TAMP backup register */ |
| clrsetbits_le32(TAMP_BOOT_CONTEXT, |
| TAMP_BOOT_MODE_MASK, |
| boot_mode << TAMP_BOOT_MODE_SHIFT); |
| } |
| |
| /* weak function: STM32MP15x mach init for boot without TFA */ |
| void stm32mp_cpu_init(void) |
| { |
| if (IS_ENABLED(CONFIG_SPL_BUILD)) { |
| security_init(); |
| update_bootmode(); |
| } |
| |
| /* reset copro state in SPL, when used, or in U-Boot */ |
| if (!IS_ENABLED(CONFIG_SPL) || IS_ENABLED(CONFIG_SPL_BUILD)) { |
| /* Reset Coprocessor state unless it wakes up from Standby power mode */ |
| if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) { |
| writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE); |
| writel(0, TAMP_COPRO_RSC_TBL_ADDRESS); |
| } |
| } |
| } |
| |
| static u32 read_idc(void) |
| { |
| /* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */ |
| if (bsec_dbgswenable()) { |
| setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN); |
| |
| return readl(DBGMCU_IDC); |
| } |
| |
| return CPU_DEV_STM32MP15; /* STM32MP15x and unknown revision */ |
| } |
| |
| u32 get_cpu_dev(void) |
| { |
| return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT; |
| } |
| |
| u32 get_cpu_rev(void) |
| { |
| return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT; |
| } |
| |
| /* Get Device Part Number (RPN) from OTP */ |
| static u32 get_cpu_rpn(void) |
| { |
| return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK); |
| } |
| |
| u32 get_cpu_type(void) |
| { |
| return (get_cpu_dev() << 16) | get_cpu_rpn(); |
| } |
| |
| int get_eth_nb(void) |
| { |
| return 1; |
| } |
| |
| /* Get Package options from OTP */ |
| u32 get_cpu_package(void) |
| { |
| return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK); |
| } |
| |
| static const char * const soc_type[] = { |
| "????", |
| "151C", "151A", "151F", "151D", |
| "153C", "153A", "153F", "153D", |
| "157C", "157A", "157F", "157D" |
| }; |
| |
| static const char * const soc_pkg[] = { "??", "AD", "AC", "AB", "AA" }; |
| static const char * const soc_rev[] = { "?", "A", "B", "Z" }; |
| |
| static void get_cpu_string_offsets(unsigned int *type, unsigned int *pkg, |
| unsigned int *rev) |
| { |
| u32 cpu_type = get_cpu_type(); |
| u32 ct = cpu_type & ~(BIT(7) | BIT(0)); |
| u32 cm = ((cpu_type & BIT(7)) >> 6) | (cpu_type & BIT(0)); |
| |
| /* Bits 0 and 7 are the ACDF, 00:C 01:A 10:F 11:D */ |
| switch (ct) { |
| case CPU_STM32MP151Cxx: |
| *type = cm + 1; |
| break; |
| case CPU_STM32MP153Cxx: |
| *type = cm + 5; |
| break; |
| case CPU_STM32MP157Cxx: |
| *type = cm + 9; |
| break; |
| default: |
| *type = 0; |
| break; |
| } |
| |
| /* Package */ |
| *pkg = get_cpu_package(); |
| if (*pkg > STM32MP15_PKG_AA_LBGA448) |
| *pkg = STM32MP15_PKG_UNKNOWN; |
| |
| /* Revision */ |
| switch (get_cpu_rev()) { |
| case CPU_REV1: |
| *rev = 1; |
| break; |
| case CPU_REV2: |
| *rev = 2; |
| break; |
| case CPU_REV2_1: |
| *rev = 3; |
| break; |
| default: |
| *rev = 0; |
| break; |
| } |
| } |
| |
| void get_soc_name(char name[SOC_NAME_SIZE]) |
| { |
| unsigned int type, pkg, rev; |
| |
| get_cpu_string_offsets(&type, &pkg, &rev); |
| |
| snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s", |
| soc_type[type], soc_pkg[pkg], soc_rev[rev]); |
| } |
| |
| static void setup_soc_type_pkg_rev(void) |
| { |
| unsigned int type, pkg, rev; |
| |
| get_cpu_string_offsets(&type, &pkg, &rev); |
| |
| env_set("soc_type", soc_type[type]); |
| env_set("soc_pkg", soc_pkg[pkg]); |
| env_set("soc_rev", soc_rev[rev]); |
| } |
| |
| /* weak function called in arch_misc_init */ |
| void stm32mp_misc_init(void) |
| { |
| setup_soc_type_pkg_rev(); |
| } |