| /* |
| * (C) Copyright 2017 |
| * Vikas Manocha, <vikas.manocha@st.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <fdtdec.h> |
| #include <asm/arch/gpio.h> |
| #include <asm/arch/stm32.h> |
| #include <asm/gpio.h> |
| #include <asm/io.h> |
| #include <linux/errno.h> |
| #include <linux/io.h> |
| |
| #define MAX_SIZE_BANK_NAME 5 |
| #define STM32_GPIOS_PER_BANK 16 |
| #define MODE_BITS(gpio_pin) (gpio_pin * 2) |
| #define MODE_BITS_MASK 3 |
| #define IN_OUT_BIT_INDEX(gpio_pin) (1UL << (gpio_pin)) |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static int stm32_gpio_direction_input(struct udevice *dev, unsigned offset) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| int bits_index = MODE_BITS(offset); |
| int mask = MODE_BITS_MASK << bits_index; |
| |
| clrsetbits_le32(®s->moder, mask, STM32_GPIO_MODE_IN << bits_index); |
| |
| return 0; |
| } |
| |
| static int stm32_gpio_direction_output(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| int bits_index = MODE_BITS(offset); |
| int mask = MODE_BITS_MASK << bits_index; |
| |
| clrsetbits_le32(®s->moder, mask, STM32_GPIO_MODE_OUT << bits_index); |
| mask = IN_OUT_BIT_INDEX(offset); |
| clrsetbits_le32(®s->odr, mask, value ? mask : 0); |
| |
| return 0; |
| } |
| |
| static int stm32_gpio_get_value(struct udevice *dev, unsigned offset) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| |
| return readl(®s->idr) & IN_OUT_BIT_INDEX(offset) ? 1 : 0; |
| } |
| |
| static int stm32_gpio_set_value(struct udevice *dev, unsigned offset, int value) |
| { |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| struct stm32_gpio_regs *regs = priv->regs; |
| int mask = IN_OUT_BIT_INDEX(offset); |
| |
| clrsetbits_le32(®s->odr, mask, value ? mask : 0); |
| |
| return 0; |
| } |
| |
| static const struct dm_gpio_ops gpio_stm32_ops = { |
| .direction_input = stm32_gpio_direction_input, |
| .direction_output = stm32_gpio_direction_output, |
| .get_value = stm32_gpio_get_value, |
| .set_value = stm32_gpio_set_value, |
| }; |
| |
| static int gpio_stm32_probe(struct udevice *dev) |
| { |
| struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| struct stm32_gpio_priv *priv = dev_get_priv(dev); |
| fdt_addr_t addr; |
| char *name; |
| |
| addr = dev_get_addr(dev); |
| if (addr == FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| priv->regs = (struct stm32_gpio_regs *)addr; |
| name = (char *)fdtdec_locate_byte_array(gd->fdt_blob, |
| dev_of_offset(dev), |
| "st,bank-name", |
| MAX_SIZE_BANK_NAME); |
| if (!name) |
| return -EINVAL; |
| uc_priv->bank_name = name; |
| uc_priv->gpio_count = STM32_GPIOS_PER_BANK; |
| debug("%s, addr = 0x%p, bank_name = %s\n", __func__, (u32 *)priv->regs, |
| uc_priv->bank_name); |
| |
| #ifdef CONFIG_CLK |
| struct clk clk; |
| int ret; |
| ret = clk_get_by_index(dev, 0, &clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_enable(&clk); |
| |
| if (ret) { |
| dev_err(dev, "failed to enable clock\n"); |
| return ret; |
| } |
| debug("clock enabled for device %s\n", dev->name); |
| #endif |
| |
| return 0; |
| } |
| |
| static const struct udevice_id stm32_gpio_ids[] = { |
| { .compatible = "st,stm32-gpio" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(gpio_stm32) = { |
| .name = "gpio_stm32", |
| .id = UCLASS_GPIO, |
| .of_match = stm32_gpio_ids, |
| .probe = gpio_stm32_probe, |
| .ops = &gpio_stm32_ops, |
| .flags = DM_FLAG_PRE_RELOC | DM_UC_FLAG_SEQ_ALIAS, |
| .priv_auto_alloc_size = sizeof(struct stm32_gpio_priv), |
| }; |