blob: 6cdcce1b92fb9502db5a7bb49ba26f19d6990ba6 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* NXP ls1028AQDS device tree source
*
* Copyright 2019 NXP
*
*/
/dts-v1/;
#include "fsl-ls1028a.dtsi"
/ {
model = "NXP Layerscape 1028a QDS Board";
compatible = "fsl,ls1028a-qds", "fsl,ls1028a";
aliases {
spi0 = &fspi;
spi1 = &dspi0;
spi2 = &dspi1;
spi3 = &dspi2;
};
};
&dspi0 {
bus-num = <0>;
status = "okay";
dflash0: sst25wf040b {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3000000>;
spi-cpol;
spi-cpha;
reg = <0>;
};
dflash1: en25s64 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3000000>;
spi-cpol;
spi-cpha;
reg = <1>;
};
dflash2: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3000000>;
spi-cpol;
spi-cpha;
reg = <2>;
};
};
&dspi1 {
bus-num = <0>;
status = "okay";
dflash3: sst25wf040b {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3000000>;
spi-cpol;
spi-cpha;
reg = <0>;
};
dflash4: en25s64 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3000000>;
spi-cpol;
spi-cpha;
reg = <1>;
};
dflash5: n25q128a {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3000000>;
spi-cpol;
spi-cpha;
reg = <2>;
};
};
&dspi2 {
bus-num = <0>;
status = "okay";
dflash8: en25s64 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-flash";
spi-max-frequency = <3000000>;
spi-cpol;
spi-cpha;
reg = <0>;
};
};
&esdhc0 {
status = "okay";
};
&esdhc1 {
status = "okay";
};
&fspi {
status = "okay";
mt35xu02g0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
spi-rx-bus-width = <8>;
spi-tx-bus-width = <1>;
};
};
&i2c0 {
status = "okay";
u-boot,dm-pre-reloc;
fpga@66 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "simple-mfd";
reg = <0x66>;
mux-mdio@54 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mdio-mux-i2creg";
reg = <0x54>;
#mux-control-cells = <1>;
mux-reg-masks = <0x54 0xf0>;
mdio-parent-bus = <&mdio0>;
/* on-board MDIO with a single RGMII PHY */
mdio@00 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x00>;
qds_phy0: phy@5 {
reg = <5>;
};
};
/* slot 1 */
slot1: mdio@40 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40>;
};
/* slot 2 */
slot2: mdio@50 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x50>;
};
/* slot 3 */
slot3: mdio@60 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x60>;
};
/* slot 4 */
slot4: mdio@70 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
};
};
};
i2c-mux@77 {
compatible = "nxp,pca9547";
reg = <0x77>;
#address-cells = <1>;
#size-cells = <0>;
};
};
&i2c1 {
status = "okay";
rtc@51 {
compatible = "pcf2127-rtc";
reg = <0x51>;
};
};
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&i2c5 {
status = "okay";
};
&i2c6 {
status = "okay";
};
&i2c7 {
status = "okay";
};
&lpuart0 {
status = "okay";
};
&sata {
status = "okay";
};
&serial0 {
status = "okay";
};
&serial1 {
status = "okay";
};
&usb1 {
status = "okay";
};
&usb2 {
status = "okay";
};
&enetc1 {
status = "okay";
phy-mode = "rgmii";
phy-handle = <&qds_phy0>;
};
&mdio0 {
status = "okay";
};