| /* |
| * Copyright (C) 2007 Freescale Semiconductor, Inc. |
| * |
| * Author: Scott Wood <scottwood@freescale.com> |
| * Dave Liu <daveliu@freescale.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <i2c.h> |
| #include <libfdt.h> |
| #include <fdt_support.h> |
| #include <pci.h> |
| #include <mpc83xx.h> |
| #include <netdev.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int board_early_init_f(void) |
| { |
| volatile immap_t *im = (immap_t *)CFG_IMMR; |
| |
| if (im->pmc.pmccr1 & PMCCR1_POWER_OFF) |
| gd->flags |= GD_FLG_SILENT; |
| |
| return 0; |
| } |
| |
| static u8 read_board_info(void) |
| { |
| u8 val8; |
| i2c_set_bus_num(0); |
| |
| if (i2c_read(CFG_I2C_PCF8574A_ADDR, 0, 0, &val8, 1) == 0) |
| return val8; |
| else |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| static const char * const rev_str[] = { |
| "0.0", |
| "0.1", |
| "1.0", |
| "1.1", |
| "<unknown>", |
| }; |
| u8 info; |
| int i; |
| |
| info = read_board_info(); |
| i = (!info) ? 4: info & 0x03; |
| |
| printf("Board: Freescale MPC8315ERDB Rev %s\n", rev_str[i]); |
| |
| return 0; |
| } |
| |
| static struct pci_region pci_regions[] = { |
| { |
| bus_start: CFG_PCI_MEM_BASE, |
| phys_start: CFG_PCI_MEM_PHYS, |
| size: CFG_PCI_MEM_SIZE, |
| flags: PCI_REGION_MEM | PCI_REGION_PREFETCH |
| }, |
| { |
| bus_start: CFG_PCI_MMIO_BASE, |
| phys_start: CFG_PCI_MMIO_PHYS, |
| size: CFG_PCI_MMIO_SIZE, |
| flags: PCI_REGION_MEM |
| }, |
| { |
| bus_start: CFG_PCI_IO_BASE, |
| phys_start: CFG_PCI_IO_PHYS, |
| size: CFG_PCI_IO_SIZE, |
| flags: PCI_REGION_IO |
| } |
| }; |
| |
| void pci_init_board(void) |
| { |
| volatile immap_t *immr = (volatile immap_t *)CFG_IMMR; |
| volatile clk83xx_t *clk = (volatile clk83xx_t *)&immr->clk; |
| volatile law83xx_t *pci_law = immr->sysconf.pcilaw; |
| struct pci_region *reg[] = { pci_regions }; |
| int warmboot; |
| |
| /* Enable all 3 PCI_CLK_OUTPUTs. */ |
| clk->occr |= 0xe0000000; |
| |
| /* |
| * Configure PCI Local Access Windows |
| */ |
| pci_law[0].bar = CFG_PCI_MEM_PHYS & LAWBAR_BAR; |
| pci_law[0].ar = LBLAWAR_EN | LBLAWAR_512MB; |
| |
| pci_law[1].bar = CFG_PCI_IO_PHYS & LAWBAR_BAR; |
| pci_law[1].ar = LBLAWAR_EN | LBLAWAR_1MB; |
| |
| warmboot = gd->bd->bi_bootflags & BOOTFLAG_WARM; |
| warmboot |= immr->pmc.pmccr1 & PMCCR1_POWER_OFF; |
| |
| mpc83xx_pci_init(1, reg, warmboot); |
| } |
| |
| #if defined(CONFIG_OF_BOARD_SETUP) |
| void fdt_tsec1_fixup(void *fdt, bd_t *bd) |
| { |
| char *mpc8315erdb = getenv("mpc8315erdb"); |
| const char disabled[] = "disabled"; |
| const char *path; |
| int ret; |
| |
| if (!mpc8315erdb) |
| return; |
| |
| if (!strcmp(mpc8315erdb, "tsec1")) { |
| return; |
| } else if (strcmp(mpc8315erdb, "ulpi")) { |
| printf("WARNING: wrong `mpc8315erdb' environment " |
| "variable specified: `%s'. Should be `ulpi' " |
| "or `tsec1'.\n", mpc8315erdb); |
| return; |
| } |
| |
| ret = fdt_path_offset(fdt, "/aliases"); |
| if (ret < 0) { |
| printf("WARNING: can't find /aliases node\n"); |
| return; |
| } |
| |
| path = fdt_getprop(fdt, ret, "ethernet0", NULL); |
| if (!path) { |
| printf("WARNING: can't find ethernet0 alias\n"); |
| return; |
| } |
| |
| do_fixup_by_path(fdt, path, "status", disabled, sizeof(disabled), 1); |
| } |
| |
| void ft_board_setup(void *blob, bd_t *bd) |
| { |
| ft_cpu_setup(blob, bd); |
| #ifdef CONFIG_PCI |
| ft_pci_setup(blob, bd); |
| #endif |
| fdt_fixup_dr_usb(blob, bd); |
| fdt_tsec1_fixup(blob, bd); |
| } |
| #endif |
| |
| int board_eth_init(bd_t *bis) |
| { |
| cpu_eth_init(bis); /* Initialize TSECs first */ |
| return pci_eth_init(bis); |
| } |