| /* |
| * (C) Copyright 2008 |
| * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| |
| #include <common.h> |
| #include <asm/processor.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/processor.h> |
| #include <asm/mmu.h> |
| #include <spd_sdram.h> |
| |
| |
| #if !defined(CONFIG_SPD_EEPROM) |
| /* |
| * Autodetect onboard DDR SDRAM on 85xx platforms |
| * |
| * NOTE: Some of the hardcoded values are hardware dependant, |
| * so this should be extended for other future boards |
| * using this routine! |
| */ |
| long int sdram_setup(int casl) |
| { |
| volatile ccsr_ddr_t *ddr = (void *)(CFG_MPC85xx_DDR_ADDR); |
| |
| /* |
| * Disable memory controller. |
| */ |
| ddr->cs0_config = 0; |
| ddr->sdram_cfg = 0; |
| |
| ddr->cs0_bnds = CFG_DDR_CS0_BNDS; |
| ddr->cs0_config = CFG_DDR_CS0_CONFIG; |
| ddr->timing_cfg_0 = CFG_DDR_TIMING_0; |
| ddr->timing_cfg_1 = CFG_DDR_TIMING_1; |
| ddr->timing_cfg_2 = CFG_DDR_TIMING_2; |
| ddr->sdram_mode = CFG_DDR_MODE; |
| ddr->sdram_interval = CFG_DDR_INTERVAL; |
| ddr->sdram_cfg_2 = CFG_DDR_CONFIG_2; |
| ddr->sdram_clk_cntl = CFG_DDR_CLK_CONTROL; |
| |
| asm ("sync;isync;msync"); |
| udelay(1000); |
| |
| ddr->sdram_cfg = CFG_DDR_CONFIG; |
| asm ("sync; isync; msync"); |
| udelay(1000); |
| |
| if (get_ram_size(0, CFG_SDRAM_SIZE<<20) == CFG_SDRAM_SIZE<<20) { |
| /* |
| * OK, size detected -> all done |
| */ |
| return CFG_SDRAM_SIZE<<20; |
| } |
| |
| return 0; /* nothing found ! */ |
| } |
| #endif |
| |
| phys_size_t initdram (int board_type) |
| { |
| long dram_size = 0; |
| #if defined(CONFIG_SPD_EEPROM) |
| dram_size = spd_sdram (); |
| #else |
| dram_size = sdram_setup(CONFIG_DDR_DEFAULT_CL); |
| #endif |
| return dram_size; |
| } |
| |
| #if defined(CFG_DRAM_TEST) |
| int testdram (void) |
| { |
| uint *pstart = (uint *) CFG_MEMTEST_START; |
| uint *pend = (uint *) CFG_MEMTEST_END; |
| uint *p; |
| |
| printf ("SDRAM test phase 1:\n"); |
| for (p = pstart; p < pend; p++) |
| *p = 0xaaaaaaaa; |
| |
| for (p = pstart; p < pend; p++) { |
| if (*p != 0xaaaaaaaa) { |
| printf ("SDRAM test fails at: %08x\n", (uint) p); |
| return 1; |
| } |
| } |
| |
| printf ("SDRAM test phase 2:\n"); |
| for (p = pstart; p < pend; p++) |
| *p = 0x55555555; |
| |
| for (p = pstart; p < pend; p++) { |
| if (*p != 0x55555555) { |
| printf ("SDRAM test fails at: %08x\n", (uint) p); |
| return 1; |
| } |
| } |
| |
| printf ("SDRAM test passed.\n"); |
| return 0; |
| } |
| #endif |