| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (c) 2016 Google, Inc |
| * Written by Simon Glass <sjg@chromium.org> |
| */ |
| |
| #define LOG_CATEGORY UCLASS_PANEL_BACKLIGHT |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <backlight.h> |
| #include <pwm.h> |
| #include <asm/gpio.h> |
| #include <power/regulator.h> |
| |
| /** |
| * Private information for the PWM backlight |
| * |
| * If @num_levels is 0 then the levels are simple values with the backlight |
| * value going between the minimum (default 0) and the maximum (default 255). |
| * Otherwise the levels are an index into @levels (0..n-1). |
| * |
| * @reg: Regulator to enable to turn the backlight on (NULL if none) |
| * @enable, GPIO to set to enable the backlight (can be missing) |
| * @pwm: PWM to use to change the backlight brightness |
| * @channel: PWM channel to use |
| * @period_ns: Period of the backlight in nanoseconds |
| * @levels: Levels for the backlight, or NULL if not using indexed levels |
| * @num_levels: Number of levels |
| * @cur_level: Current level for the backlight (index or value) |
| * @default_level: Default level for the backlight (index or value) |
| * @min_level: Minimum level of the backlight (full off) |
| * @min_level: Maximum level of the backlight (full on) |
| * @enabled: true if backlight is enabled |
| */ |
| struct pwm_backlight_priv { |
| struct udevice *reg; |
| struct gpio_desc enable; |
| struct udevice *pwm; |
| uint channel; |
| uint period_ns; |
| /* |
| * the polarity of one PWM |
| * 0: normal polarity |
| * 1: inverted polarity |
| */ |
| bool polarity; |
| u32 *levels; |
| int num_levels; |
| uint default_level; |
| int cur_level; |
| uint min_level; |
| uint max_level; |
| bool enabled; |
| }; |
| |
| static int set_pwm(struct pwm_backlight_priv *priv) |
| { |
| uint duty_cycle; |
| int ret; |
| |
| duty_cycle = priv->period_ns * (priv->cur_level - priv->min_level) / |
| (priv->max_level - priv->min_level + 1); |
| ret = pwm_set_config(priv->pwm, priv->channel, priv->period_ns, |
| duty_cycle); |
| if (ret) |
| return log_ret(ret); |
| |
| ret = pwm_set_invert(priv->pwm, priv->channel, priv->polarity); |
| if (ret == -ENOSYS && !priv->polarity) |
| ret = 0; |
| |
| return log_ret(ret); |
| } |
| |
| static int enable_sequence(struct udevice *dev, int seq) |
| { |
| struct pwm_backlight_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| switch (seq) { |
| case 0: |
| if (priv->reg) { |
| __maybe_unused struct dm_regulator_uclass_platdata |
| *plat; |
| |
| plat = dev_get_uclass_platdata(priv->reg); |
| log_debug("Enable '%s', regulator '%s'/'%s'\n", |
| dev->name, priv->reg->name, plat->name); |
| ret = regulator_set_enable(priv->reg, true); |
| if (ret) { |
| log_debug("Cannot enable regulator for PWM '%s'\n", |
| dev->name); |
| return log_ret(ret); |
| } |
| mdelay(120); |
| } |
| break; |
| case 1: |
| mdelay(10); |
| dm_gpio_set_value(&priv->enable, 1); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int pwm_backlight_enable(struct udevice *dev) |
| { |
| struct pwm_backlight_priv *priv = dev_get_priv(dev); |
| int ret; |
| |
| ret = enable_sequence(dev, 0); |
| if (ret) |
| return log_ret(ret); |
| ret = set_pwm(priv); |
| if (ret) |
| return log_ret(ret); |
| ret = pwm_set_enable(priv->pwm, priv->channel, true); |
| if (ret) |
| return log_ret(ret); |
| ret = enable_sequence(dev, 1); |
| if (ret) |
| return log_ret(ret); |
| priv->enabled = true; |
| |
| return 0; |
| } |
| |
| static int pwm_backlight_set_brightness(struct udevice *dev, int percent) |
| { |
| struct pwm_backlight_priv *priv = dev_get_priv(dev); |
| bool disable = false; |
| int level; |
| int ret; |
| |
| if (!priv->enabled) { |
| ret = enable_sequence(dev, 0); |
| if (ret) |
| return log_ret(ret); |
| } |
| if (percent == BACKLIGHT_OFF) { |
| disable = true; |
| percent = 0; |
| } |
| if (percent == BACKLIGHT_DEFAULT) { |
| level = priv->default_level; |
| } else { |
| if (priv->levels) { |
| level = priv->levels[percent * (priv->num_levels - 1) |
| / 100]; |
| } else { |
| level = priv->min_level + |
| (priv->max_level - priv->min_level) * |
| percent / 100; |
| } |
| } |
| priv->cur_level = level; |
| |
| ret = set_pwm(priv); |
| if (ret) |
| return log_ret(ret); |
| if (!priv->enabled) { |
| ret = enable_sequence(dev, 1); |
| if (ret) |
| return log_ret(ret); |
| priv->enabled = true; |
| } |
| if (disable) { |
| dm_gpio_set_value(&priv->enable, 0); |
| if (priv->reg) { |
| ret = regulator_set_enable(priv->reg, false); |
| if (ret) |
| return log_ret(ret); |
| } |
| priv->enabled = false; |
| } |
| |
| return 0; |
| } |
| |
| static int pwm_backlight_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct pwm_backlight_priv *priv = dev_get_priv(dev); |
| struct ofnode_phandle_args args; |
| int index, ret, count, len; |
| const u32 *cell; |
| |
| log_debug("start\n"); |
| ret = uclass_get_device_by_phandle(UCLASS_REGULATOR, dev, |
| "power-supply", &priv->reg); |
| if (ret) |
| log_debug("Cannot get power supply: ret=%d\n", ret); |
| ret = gpio_request_by_name(dev, "enable-gpios", 0, &priv->enable, |
| GPIOD_IS_OUT); |
| if (ret) { |
| log_debug("Warning: cannot get enable GPIO: ret=%d\n", ret); |
| if (ret != -ENOENT) |
| return log_ret(ret); |
| } |
| ret = dev_read_phandle_with_args(dev, "pwms", "#pwm-cells", 0, 0, |
| &args); |
| if (ret) { |
| log_debug("Cannot get PWM phandle: ret=%d\n", ret); |
| return log_ret(ret); |
| } |
| |
| ret = uclass_get_device_by_ofnode(UCLASS_PWM, args.node, &priv->pwm); |
| if (ret) { |
| log_debug("Cannot get PWM: ret=%d\n", ret); |
| return log_ret(ret); |
| } |
| if (args.args_count < 2) |
| return log_msg_ret("Not enough arguments to pwm\n", -EINVAL); |
| priv->channel = args.args[0]; |
| priv->period_ns = args.args[1]; |
| if (args.args_count > 2) |
| priv->polarity = args.args[2]; |
| |
| index = dev_read_u32_default(dev, "default-brightness-level", 255); |
| cell = dev_read_prop(dev, "brightness-levels", &len); |
| count = len / sizeof(u32); |
| if (cell && count > index) { |
| priv->levels = malloc(len); |
| if (!priv->levels) |
| return log_ret(-ENOMEM); |
| dev_read_u32_array(dev, "brightness-levels", priv->levels, |
| count); |
| priv->num_levels = count; |
| priv->default_level = priv->levels[index]; |
| priv->max_level = priv->levels[count - 1]; |
| } else { |
| priv->default_level = index; |
| priv->max_level = 255; |
| } |
| priv->cur_level = priv->default_level; |
| log_debug("done\n"); |
| |
| |
| return 0; |
| } |
| |
| static int pwm_backlight_probe(struct udevice *dev) |
| { |
| return 0; |
| } |
| |
| static const struct backlight_ops pwm_backlight_ops = { |
| .enable = pwm_backlight_enable, |
| .set_brightness = pwm_backlight_set_brightness, |
| }; |
| |
| static const struct udevice_id pwm_backlight_ids[] = { |
| { .compatible = "pwm-backlight" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(pwm_backlight) = { |
| .name = "pwm_backlight", |
| .id = UCLASS_PANEL_BACKLIGHT, |
| .of_match = pwm_backlight_ids, |
| .ops = &pwm_backlight_ops, |
| .ofdata_to_platdata = pwm_backlight_ofdata_to_platdata, |
| .probe = pwm_backlight_probe, |
| .priv_auto_alloc_size = sizeof(struct pwm_backlight_priv), |
| }; |