include/configs/m53menlo.h - platform/external/u-boot - Gitiles

 /* SPDX-License-Identifier: GPL-2.0+ */

 /*
  * Menlosystems M53Menlo configuration
  * Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
  * Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
  */

 #ifndef __M53MENLO_CONFIG_H__
 #define __M53MENLO_CONFIG_H__

 #include <asm/arch/imx-regs.h>

 #define CONFIG_REVISION_TAG
 #define CONFIG_SYS_FSL_CLK

 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */

 /*
  * Memory configurations
  */
 #define PHYS_SDRAM_1			CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE		(gd->bd->bi_dram[0].size)
 #define PHYS_SDRAM_2			CSD1_BASE_ADDR
 #define PHYS_SDRAM_2_SIZE		(gd->bd->bi_dram[1].size)
 #define PHYS_SDRAM_SIZE			(gd->ram_size)
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 #define CONFIG_SYS_MEMTEST_START	0x70000000
 #define CONFIG_SYS_MEMTEST_END		0x8ff00000

 #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
 #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
 #define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 /*
  * U-Boot general configurations
  */
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
 #define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 						/* Boot argument buffer size */

 /*
  * Serial Driver
  */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART1_BASE

 /*
  * MMC Driver
  */
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 #endif

 /*
  * NAND
  */
 #define CONFIG_ENV_SIZE			(16 * 1024)
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR_AXI
 #define CONFIG_MXC_NAND_REGS_BASE	NFC_BASE_ADDR_AXI
 #define CONFIG_MXC_NAND_IP_REGS_BASE	NFC_BASE_ADDR
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_USE_FLASH_BBT

 /* Environment is in NAND */
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
 #define CONFIG_ENV_RANGE		(4 * CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_OFFSET		(8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
 #define CONFIG_ENV_OFFSET_REDUND	\
 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 #endif

 /*
  * Ethernet on SOC (FEC)
  */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR		0x0
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_ETHPRIME			"FEC0"
 #endif

 /*
  * I2C
  */
 #ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_RTC_BUS_NUM		1 /* I2C2 */
 #endif

 /*
  * RTC
  */
 #ifdef CONFIG_CMD_DATE
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
 #define CONFIG_SYS_M41T11_BASE_YEAR	2000
 #endif

 /*
  * USB
  */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI_MX5
 #define CONFIG_MXC_USB_PORT		1
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 #endif

 /*
  * SATA
  */
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_BASE_ADDR
 #define CONFIG_LBA48
 #endif

 /*
  * LCD
  */
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASHIMAGE_GUARD
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
 #endif

 /* LVDS display */
 #define CONFIG_SYS_LDB_CLOCK			33260000
 #define CONFIG_IMX_VIDEO_SKIP
 #define CONFIG_SPLASH_SOURCE

 /* IIM Fuses */
 #define CONFIG_FSL_IIM

 /*
  * Boot Linux
  */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTFILE		"boot/fitImage"
 #define CONFIG_LOADADDR		0x70800000
 #define CONFIG_BOOTCOMMAND	"run mmc_mmc"
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

 /*
  * NAND SPL
  */
 #define CONFIG_SPL_TARGET		"u-boot-with-nand-spl.imx"
 #define CONFIG_SPL_TEXT_BASE		0x70008000
 #define CONFIG_SPL_PAD_TO		0x8000
 #define CONFIG_SPL_STACK		0x70004000

 #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0

 /*
  * Extra Environments
  */
 #define CONFIG_PREBOOT		"run try_bootscript"
 #define CONFIG_HOSTNAME		"m53menlo"

 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"consdev=ttymxc0\0"						\
 	"baudrate=115200\0"						\
 	"bootscript=boot.scr\0"						\
 	"mmcdev=0\0"							\
 	"mmcpart=1\0"							\
 	"rootpath=/srv/\0"						\
 	"kernel_addr_r=0x72000000\0"					\
 	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"				\
 	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"			\
 	"netdev=eth0\0"							\
 	"splashsource=mmc_fs\0"						\
 	"splashfile=usplash.bmp.gz\0"					\
 	"splashimage=0x88000000\0"					\
 	"splashpos=m,m\0"						\
 	"addcons="							\
 		"setenv bootargs ${bootargs} "				\
 		"console=${consdev},${baudrate}\0"			\
 	"addip="							\
 		"setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off\0"				\
 	"addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0"	\
 	"addmisc="							\
 		"setenv bootargs ${bootargs} ${miscargs}\0"		\
 	"addargs=run addcons addmisc addmtd\0"				\
 	"mmcload="							\
 		"mmc rescan ; load mmc ${mmcdev}:${mmcpart} "		\
 		"${kernel_addr_r} ${bootfile}\0"			\
 	"miscargs=nohlt panic=1\0"					\
 	"mmcargs=setenv bootargs root=/dev/mmcblk0p${mmcpart} rw "	\
 		"rootwait\0"						\
 	"mmc_mmc="							\
 		"run mmcload mmcargs addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"netload=tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
 	"net_nfs="							\
 		"run netload nfsargs addip addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"nfsargs="							\
 		"setenv bootargs root=/dev/nfs rw "			\
 		"nfsroot=${serverip}:${rootpath}${hostname},v3,tcp\0"	\
 	"try_bootscript="						\
 		"mmc rescan;"						\
 		"if test -e mmc 0:1 ${bootscript} ; then "		\
 		"if load mmc 0:1 ${kernel_addr_r} ${bootscript};"	\
 		"then ; "						\
 			"echo Running bootscript... ; "			\
 			"source ${kernel_addr_r} ; "			\
 		"fi ; "							\
 		"fi\0"

 #endif	/* __M53MENLO_CONFIG_H__ */
	/* SPDX-License-Identifier: GPL-2.0+ */

	/*
	* Menlosystems M53Menlo configuration
	* Copyright (C) 2012-2017 Marek Vasut <marex@denx.de>
	* Copyright (C) 2014-2017 Olaf Mandel <o.mandel@menlosystems.com>
	*/

	#ifndef __M53MENLO_CONFIG_H__
	#define __M53MENLO_CONFIG_H__

	#include <asm/arch/imx-regs.h>

	#define CONFIG_REVISION_TAG
	#define CONFIG_SYS_FSL_CLK

	#define CONFIG_TIMESTAMP /* Print image info with timestamp */

	/*
	* Memory configurations
	*/
	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
	#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
	#define PHYS_SDRAM_2 CSD1_BASE_ADDR
	#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
	#define PHYS_SDRAM_SIZE (gd->ram_size)
	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	#define CONFIG_SYS_MEMTEST_START 0x70000000
	#define CONFIG_SYS_MEMTEST_END 0x8ff00000

	#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	/*
	* U-Boot general configurations
	*/
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
	#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	/* Boot argument buffer size */

	/*
	* Serial Driver
	*/
	#define CONFIG_MXC_UART
	#define CONFIG_MXC_UART_BASE UART1_BASE

	/*
	* MMC Driver
	*/
	#ifdef CONFIG_CMD_MMC
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	#endif

	/*
	* NAND
	*/
	#define CONFIG_ENV_SIZE (16 * 1024)
	#ifdef CONFIG_CMD_NAND
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
	#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
	#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
	#define CONFIG_SYS_NAND_LARGEPAGE
	#define CONFIG_MXC_NAND_HWECC
	#define CONFIG_SYS_NAND_USE_FLASH_BBT

	/* Environment is in NAND */
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
	#define CONFIG_ENV_OFFSET (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
	#define CONFIG_ENV_OFFSET_REDUND \
	(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
	#endif

	/*
	* Ethernet on SOC (FEC)
	*/
	#ifdef CONFIG_CMD_NET
	#define CONFIG_FEC_MXC
	#define IMX_FEC_BASE FEC_BASE_ADDR
	#define CONFIG_FEC_MXC_PHYADDR 0x0
	#define CONFIG_MII
	#define CONFIG_DISCOVER_PHY
	#define CONFIG_FEC_XCV_TYPE RMII
	#define CONFIG_ETHPRIME "FEC0"
	#endif

	/*
	* I2C
	*/
	#ifdef CONFIG_CMD_I2C
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
	#define CONFIG_SYS_RTC_BUS_NUM 1 /* I2C2 */
	#endif

	/*
	* RTC
	*/
	#ifdef CONFIG_CMD_DATE
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	#define CONFIG_SYS_M41T11_BASE_YEAR 2000
	#endif

	/*
	* USB
	*/
	#ifdef CONFIG_CMD_USB
	#define CONFIG_USB_EHCI_MX5
	#define CONFIG_MXC_USB_PORT 1
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0
	#endif

	/*
	* SATA
	*/
	#ifdef CONFIG_CMD_SATA
	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	#define CONFIG_DWC_AHSATA_PORT_ID 0
	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
	#define CONFIG_LBA48
	#endif

	/*
	* LCD
	*/
	#ifdef CONFIG_VIDEO
	#define CONFIG_VIDEO_IPUV3
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_VIDEO_BMP_GZIP
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASHIMAGE_GUARD
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
	#endif

	/* LVDS display */
	#define CONFIG_SYS_LDB_CLOCK 33260000
	#define CONFIG_IMX_VIDEO_SKIP
	#define CONFIG_SPLASH_SOURCE

	/* IIM Fuses */
	#define CONFIG_FSL_IIM

	/*
	* Boot Linux
	*/
	#define CONFIG_CMDLINE_TAG
	#define CONFIG_INITRD_TAG
	#define CONFIG_REVISION_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_BOOTFILE "boot/fitImage"
	#define CONFIG_LOADADDR 0x70800000
	#define CONFIG_BOOTCOMMAND "run mmc_mmc"
	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR

	/*
	* NAND SPL
	*/
	#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
	#define CONFIG_SPL_TEXT_BASE 0x70008000
	#define CONFIG_SPL_PAD_TO 0x8000
	#define CONFIG_SPL_STACK 0x70004000

	#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	#define CONFIG_SYS_NAND_OOBSIZE 64
	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
	#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0

	/*
	* Extra Environments
	*/
	#define CONFIG_PREBOOT "run try_bootscript"
	#define CONFIG_HOSTNAME "m53menlo"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"consdev=ttymxc0\0" \
	"baudrate=115200\0" \
	"bootscript=boot.scr\0" \
	"mmcdev=0\0" \
	"mmcpart=1\0" \
	"rootpath=/srv/\0" \
	"kernel_addr_r=0x72000000\0" \
	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
	"netdev=eth0\0" \
	"splashsource=mmc_fs\0" \
	"splashfile=usplash.bmp.gz\0" \
	"splashimage=0x88000000\0" \
	"splashpos=m,m\0" \
	"addcons=" \
	"setenv bootargs ${bootargs} " \
	"console=${consdev},${baudrate}\0" \
	"addip=" \
	"setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
	":${hostname}:${netdev}:off\0" \
	"addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \
	"addmisc=" \
	"setenv bootargs ${bootargs} ${miscargs}\0" \
	"addargs=run addcons addmisc addmtd\0" \
	"mmcload=" \
	"mmc rescan ; load mmc ${mmcdev}:${mmcpart} " \
	"${kernel_addr_r} ${bootfile}\0" \
	"miscargs=nohlt panic=1\0" \
	"mmcargs=setenv bootargs root=/dev/mmcblk0p${mmcpart} rw " \
	"rootwait\0" \
	"mmc_mmc=" \
	"run mmcload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"netload=tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	"net_nfs=" \
	"run netload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"nfsargs=" \
	"setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath}${hostname},v3,tcp\0" \
	"try_bootscript=" \
	"mmc rescan;" \
	"if test -e mmc 0:1 ${bootscript} ; then " \
	"if load mmc 0:1 ${kernel_addr_r} ${bootscript};" \
	"then ; " \
	"echo Running bootscript... ; " \
	"source ${kernel_addr_r} ; " \
	"fi ; " \
	"fi\0"

	#endif /* __M53MENLO_CONFIG_H__ */