blob: 3903dcf3e9f195077d333d9b6a6f5c8d869d81e6 [file] [log] [blame]
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2017 Andes Technology Corporation
* Rick Chen, Andes Technology Corporation <rick@andestech.com>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#ifdef CONFIG_SPL
#define CONFIG_SPL_MAX_SIZE 0x00100000
#define CONFIG_SPL_BSS_START_ADDR 0x04000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
#ifdef CONFIG_SPL_MMC
#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
#endif
#endif
#define RISCV_MMODE_TIMERBASE 0xe6000000
#define RISCV_MMODE_TIMER_FREQ 60000000
#define RISCV_SMODE_TIMER_FREQ 60000000
/*
* CPU and Board Configuration Options
*/
/*
* Miscellaneous configurable options
*/
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
/*
* Print Buffer Size
*/
#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
/*
* max number of command args
*/
#define CONFIG_SYS_MAXARGS 16
/*
* Boot Argument Buffer Size
*/
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* DT blob (fdt) address */
#define CONFIG_SYS_FDT_BASE 0x800f0000
/*
* Physical Memory Map
*/
#define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1 \
(PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
#define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
/*
* Serial console configuration
*/
#define CONFIG_SYS_NS16550_SERIAL
#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE -4
#endif
#define CONFIG_SYS_NS16550_CLK 19660800
/* Init Stack Pointer */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \
GENERATED_GBL_DATA_SIZE)
/* use CFI framework */
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_CFI_FLASH_STATUS_POLL
/* support JEDEC */
#define PHYS_FLASH_1 0x88000000 /* BANK 0 */
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
/* max number of memory banks */
/*
* There are 4 banks supported for this Controller,
* but we have only 1 bank connected to flash on board
*/
#define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
/* max number of sectors on one chip */
#define CONFIG_FLASH_SECTOR_SIZE (0x10000*2)
#define CONFIG_SYS_MAX_FLASH_SECT 512
/* environments */
/* SPI FLASH */
/*
* For booting Linux, the board info and command line data
* have to be in the first 16 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
/* Initial Memory map for Linux*/
#define CONFIG_SYS_BOOTMAPSZ (64 << 20)
/* Increase max gunzip size */
#define CONFIG_SYS_BOOTM_LEN (64 << 20)
/* Support autoboot from RAM (kernel image is loaded via debug port) */
#define KERNEL_IMAGE_ADDR "0x2000000 "
#define BOOTENV_DEV_NAME_RAM(devtypeu, devtypel, instance) \
"ram "
#define BOOTENV_DEV_RAM(devtypeu, devtypel, instance) \
"bootcmd_ram=" \
"booti " \
KERNEL_IMAGE_ADDR \
"- $fdtcontroladdr\0"
/* When we use RAM as ENV */
/* Enable distro boot */
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(DHCP, dhcp, na) \
func(RAM, ram, na)
#include <config_distro_bootcmd.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
"kernel_addr_r=0x00080000\0" \
"pxefile_addr_r=0x01f00000\0" \
"scriptaddr=0x01f00000\0" \
"fdt_addr_r=0x02000000\0" \
"ramdisk_addr_r=0x02800000\0" \
BOOTENV
#endif /* __CONFIG_H */