| /* |
| * (C) Copyright 2001 |
| * Bill Hunter, Wave 7 Optics, williamhunter@mediaone.net |
| * and |
| * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <config.h> |
| #include <rtc.h> |
| #include "errors.h" |
| #include "dtt.h" |
| |
| #if defined(CONFIG_RTC_M48T35A) |
| void rtctest(void) |
| { |
| volatile uchar *tchar = (uchar*)(CFG_NVRAM_BASE_ADDR + CFG_NVRAM_SIZE - 9); |
| struct rtc_time tmp; |
| |
| /* set up led code for RTC tests */ |
| log_stat(ERR_RTCG); |
| |
| /* |
| * Do RTC battery test. The first write after power up |
| * fails if battery is low. |
| */ |
| *tchar = 0xaa; |
| if ((*tchar ^ 0xaa) != 0x0) log_warn(ERR_RTCBAT); |
| *tchar = 0x55; /* Reset test address */ |
| |
| /* |
| * Now lets check the validity of the values in the RTC. |
| */ |
| rtc_get(&tmp); |
| if ((tmp.tm_sec < 0) | (tmp.tm_sec > 59) | |
| (tmp.tm_min < 0) | (tmp.tm_min > 59) | |
| (tmp.tm_hour < 0) | (tmp.tm_hour > 23) | |
| (tmp.tm_mday < 1 ) | (tmp.tm_mday > 31) | |
| (tmp.tm_mon < 1 ) | (tmp.tm_mon > 12) | |
| (tmp.tm_year < 2000) | (tmp.tm_year > 2500) | |
| (tmp.tm_wday < 1 ) | (tmp.tm_wday > 7)) { |
| log_warn(ERR_RTCTIM); |
| rtc_reset(); |
| } |
| |
| /* |
| * Now lets do a check to see if the NV RAM is there. |
| */ |
| *tchar = 0xaa; |
| if ((*tchar ^ 0xaa) != 0x0) log_err(ERR_RTCVAL); |
| *tchar = 0x55; /* Reset test address */ |
| |
| } /* rtctest() */ |
| #endif /* CONFIG_RTC_M48T35A */ |
| |
| |
| #ifdef CONFIG_DTT_LM75 |
| int dtt_test(int sensor) |
| { |
| short temp, trip, hyst; |
| |
| /* get values */ |
| temp = dtt_read(sensor, DTT_READ_TEMP) / 256; |
| trip = dtt_read(sensor, DTT_TEMP_SET) / 256; |
| hyst = dtt_read(sensor, DTT_TEMP_HYST) / 256; |
| |
| /* check values */ |
| if ((hyst != (CFG_DTT_MAX_TEMP - CFG_DTT_HYSTERESIS)) || |
| (trip != CFG_DTT_MAX_TEMP) || |
| (temp < CFG_DTT_LOW_TEMP) || (temp > CFG_DTT_MAX_TEMP)) |
| return 1; |
| |
| return 0; |
| } /* dtt_test() */ |
| #endif /* CONFIG_DTT_LM75 */ |
| |
| /*****************************************/ |
| |
| void post2(void) |
| { |
| #if defined(CONFIG_RTC_M48T35A) |
| rtctest(); |
| #endif /* CONFIG_RTC_M48T35A */ |
| |
| #ifdef CONFIG_DTT_LM75 |
| log_stat(ERR_TempG); |
| if(dtt_test(2) != 0) log_warn(ERR_Ttest0); |
| if(dtt_test(4) != 0) log_warn(ERR_Ttest1); |
| #endif /* CONFIG_DTT_LM75 */ |
| } /* post2() */ |