| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * (C) Copyright 2000-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * (C) Copyright 2007 Freescale Semiconductor, Inc. |
| * TsiChung Liew (Tsi-Chung.Liew@freescale.com) |
| * |
| * Conversion to DM |
| * (C) 2019 Angelo Dureghello <angelo.dureghello@timesys.com> |
| */ |
| |
| #include <common.h> |
| #include <env.h> |
| #include <hang.h> |
| #include <malloc.h> |
| #include <command.h> |
| #include <config.h> |
| #include <net.h> |
| #include <miiphy.h> |
| #include <linux/mii.h> |
| #include <asm/immap.h> |
| #include <asm/fsl_mcdmafec.h> |
| |
| #include "MCD_dma.h" |
| |
| #undef ET_DEBUG |
| #undef MII_DEBUG |
| |
| /* Ethernet Transmit and Receive Buffers */ |
| #define DBUF_LENGTH 1520 |
| #define PKT_MAXBUF_SIZE 1518 |
| #define FIFO_ERRSTAT (FIFO_STAT_RXW | FIFO_STAT_UF | FIFO_STAT_OF) |
| |
| /* RxBD bits definitions */ |
| #define BD_ENET_RX_ERR (BD_ENET_RX_LG | BD_ENET_RX_NO | BD_ENET_RX_CR | \ |
| BD_ENET_RX_OV | BD_ENET_RX_TR) |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| static void init_eth_info(struct fec_info_dma *info) |
| { |
| /* setup Receive and Transmit buffer descriptor */ |
| #ifdef CONFIG_SYS_FEC_BUF_USE_SRAM |
| static u32 tmp; |
| |
| if (info->index == 0) |
| tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000; |
| else |
| info->rxbd = (cbd_t *)DBUF_LENGTH; |
| |
| info->rxbd = (cbd_t *)((u32)info->rxbd + tmp); |
| tmp = (u32)info->rxbd; |
| info->txbd = |
| (cbd_t *)((u32)info->txbd + tmp + |
| (PKTBUFSRX * sizeof(cbd_t))); |
| tmp = (u32)info->txbd; |
| info->txbuf = |
| (char *)((u32)info->txbuf + tmp + |
| (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); |
| tmp = (u32)info->txbuf; |
| #else |
| info->rxbd = |
| (cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE, |
| (PKTBUFSRX * sizeof(cbd_t))); |
| info->txbd = |
| (cbd_t *)memalign(CONFIG_SYS_CACHELINE_SIZE, |
| (CONFIG_SYS_TX_ETH_BUFFER * sizeof(cbd_t))); |
| info->txbuf = |
| (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, DBUF_LENGTH); |
| #endif |
| |
| #ifdef ET_DEBUG |
| printf("rxbd %x txbd %x\n", (int)info->rxbd, (int)info->txbd); |
| #endif |
| info->phy_name = (char *)memalign(CONFIG_SYS_CACHELINE_SIZE, 32); |
| } |
| |
| static void fec_halt(struct udevice *dev) |
| { |
| struct fec_info_dma *info = dev->priv; |
| volatile fecdma_t *fecp = (fecdma_t *)info->iobase; |
| int counter = 0xffff; |
| |
| /* issue graceful stop command to the FEC transmitter if necessary */ |
| fecp->tcr |= FEC_TCR_GTS; |
| |
| /* wait for graceful stop to register */ |
| while ((counter--) && (!(fecp->eir & FEC_EIR_GRA))) |
| ; |
| |
| /* Disable DMA tasks */ |
| MCD_killDma(info->tx_task); |
| MCD_killDma(info->rx_task); |
| |
| /* Disable the Ethernet Controller */ |
| fecp->ecr &= ~FEC_ECR_ETHER_EN; |
| |
| /* Clear FIFO status registers */ |
| fecp->rfsr &= FIFO_ERRSTAT; |
| fecp->tfsr &= FIFO_ERRSTAT; |
| |
| fecp->frst = 0x01000000; |
| |
| /* Issue a reset command to the FEC chip */ |
| fecp->ecr |= FEC_ECR_RESET; |
| |
| /* wait at least 20 clock cycles */ |
| mdelay(10); |
| |
| #ifdef ET_DEBUG |
| printf("Ethernet task stopped\n"); |
| #endif |
| } |
| |
| #ifdef ET_DEBUG |
| static void dbg_fec_regs(struct eth_device *dev) |
| { |
| struct fec_info_dma *info = dev->priv; |
| volatile fecdma_t *fecp = (fecdma_t *)info->iobase; |
| |
| printf("=====\n"); |
| printf("ievent %x - %x\n", (int)&fecp->eir, fecp->eir); |
| printf("imask %x - %x\n", (int)&fecp->eimr, fecp->eimr); |
| printf("ecntrl %x - %x\n", (int)&fecp->ecr, fecp->ecr); |
| printf("mii_mframe %x - %x\n", (int)&fecp->mmfr, fecp->mmfr); |
| printf("mii_speed %x - %x\n", (int)&fecp->mscr, fecp->mscr); |
| printf("mii_ctrlstat %x - %x\n", (int)&fecp->mibc, fecp->mibc); |
| printf("r_cntrl %x - %x\n", (int)&fecp->rcr, fecp->rcr); |
| printf("r hash %x - %x\n", (int)&fecp->rhr, fecp->rhr); |
| printf("x_cntrl %x - %x\n", (int)&fecp->tcr, fecp->tcr); |
| printf("padr_l %x - %x\n", (int)&fecp->palr, fecp->palr); |
| printf("padr_u %x - %x\n", (int)&fecp->paur, fecp->paur); |
| printf("op_pause %x - %x\n", (int)&fecp->opd, fecp->opd); |
| printf("iadr_u %x - %x\n", (int)&fecp->iaur, fecp->iaur); |
| printf("iadr_l %x - %x\n", (int)&fecp->ialr, fecp->ialr); |
| printf("gadr_u %x - %x\n", (int)&fecp->gaur, fecp->gaur); |
| printf("gadr_l %x - %x\n", (int)&fecp->galr, fecp->galr); |
| printf("x_wmrk %x - %x\n", (int)&fecp->tfwr, fecp->tfwr); |
| printf("r_fdata %x - %x\n", (int)&fecp->rfdr, fecp->rfdr); |
| printf("r_fstat %x - %x\n", (int)&fecp->rfsr, fecp->rfsr); |
| printf("r_fctrl %x - %x\n", (int)&fecp->rfcr, fecp->rfcr); |
| printf("r_flrfp %x - %x\n", (int)&fecp->rlrfp, fecp->rlrfp); |
| printf("r_flwfp %x - %x\n", (int)&fecp->rlwfp, fecp->rlwfp); |
| printf("r_frfar %x - %x\n", (int)&fecp->rfar, fecp->rfar); |
| printf("r_frfrp %x - %x\n", (int)&fecp->rfrp, fecp->rfrp); |
| printf("r_frfwp %x - %x\n", (int)&fecp->rfwp, fecp->rfwp); |
| printf("t_fdata %x - %x\n", (int)&fecp->tfdr, fecp->tfdr); |
| printf("t_fstat %x - %x\n", (int)&fecp->tfsr, fecp->tfsr); |
| printf("t_fctrl %x - %x\n", (int)&fecp->tfcr, fecp->tfcr); |
| printf("t_flrfp %x - %x\n", (int)&fecp->tlrfp, fecp->tlrfp); |
| printf("t_flwfp %x - %x\n", (int)&fecp->tlwfp, fecp->tlwfp); |
| printf("t_ftfar %x - %x\n", (int)&fecp->tfar, fecp->tfar); |
| printf("t_ftfrp %x - %x\n", (int)&fecp->tfrp, fecp->tfrp); |
| printf("t_ftfwp %x - %x\n", (int)&fecp->tfwp, fecp->tfwp); |
| printf("frst %x - %x\n", (int)&fecp->frst, fecp->frst); |
| printf("ctcwr %x - %x\n", (int)&fecp->ctcwr, fecp->ctcwr); |
| } |
| #endif |
| |
| static void set_fec_duplex_speed(volatile fecdma_t *fecp, int dup_spd) |
| { |
| bd_t *bd = gd->bd; |
| |
| if ((dup_spd >> 16) == FULL) { |
| /* Set maximum frame length */ |
| fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | FEC_RCR_MII_MODE | |
| FEC_RCR_PROM | 0x100; |
| fecp->tcr = FEC_TCR_FDEN; |
| } else { |
| /* Half duplex mode */ |
| fecp->rcr = FEC_RCR_MAX_FL(PKT_MAXBUF_SIZE) | |
| FEC_RCR_MII_MODE | FEC_RCR_DRT; |
| fecp->tcr &= ~FEC_TCR_FDEN; |
| } |
| |
| if ((dup_spd & 0xFFFF) == _100BASET) { |
| #ifdef MII_DEBUG |
| printf("100Mbps\n"); |
| #endif |
| bd->bi_ethspeed = 100; |
| } else { |
| #ifdef MII_DEBUG |
| printf("10Mbps\n"); |
| #endif |
| bd->bi_ethspeed = 10; |
| } |
| } |
| |
| static void fec_set_hwaddr(volatile fecdma_t *fecp, u8 *mac) |
| { |
| u8 curr_byte; /* byte for which to compute the CRC */ |
| int byte; /* loop - counter */ |
| int bit; /* loop - counter */ |
| u32 crc = 0xffffffff; /* initial value */ |
| |
| for (byte = 0; byte < 6; byte++) { |
| curr_byte = mac[byte]; |
| for (bit = 0; bit < 8; bit++) { |
| if ((curr_byte & 0x01) ^ (crc & 0x01)) { |
| crc >>= 1; |
| crc = crc ^ 0xedb88320; |
| } else { |
| crc >>= 1; |
| } |
| curr_byte >>= 1; |
| } |
| } |
| |
| crc = crc >> 26; |
| |
| /* Set individual hash table register */ |
| if (crc >= 32) { |
| fecp->ialr = (1 << (crc - 32)); |
| fecp->iaur = 0; |
| } else { |
| fecp->ialr = 0; |
| fecp->iaur = (1 << crc); |
| } |
| |
| /* Set physical address */ |
| fecp->palr = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; |
| fecp->paur = (mac[4] << 24) + (mac[5] << 16) + 0x8808; |
| |
| /* Clear multicast address hash table */ |
| fecp->gaur = 0; |
| fecp->galr = 0; |
| } |
| |
| static int fec_init(struct udevice *dev) |
| { |
| struct fec_info_dma *info = dev->priv; |
| volatile fecdma_t *fecp = (fecdma_t *)info->iobase; |
| int rval, i; |
| uchar enetaddr[6]; |
| |
| #ifdef ET_DEBUG |
| printf("fec_init: iobase 0x%08x ...\n", info->iobase); |
| #endif |
| |
| fecpin_setclear(info, 1); |
| fec_halt(dev); |
| |
| #if defined(CONFIG_CMD_MII) || defined (CONFIG_MII) || \ |
| defined (CONFIG_SYS_DISCOVER_PHY) |
| |
| mii_init(); |
| set_fec_duplex_speed(fecp, info->dup_spd); |
| #else |
| #ifndef CONFIG_SYS_DISCOVER_PHY |
| set_fec_duplex_speed(fecp, (FECDUPLEX << 16) | FECSPEED); |
| #endif /* ifndef CONFIG_SYS_DISCOVER_PHY */ |
| #endif /* CONFIG_CMD_MII || CONFIG_MII */ |
| |
| /* We use strictly polling mode only */ |
| fecp->eimr = 0; |
| |
| /* Clear any pending interrupt */ |
| fecp->eir = 0xffffffff; |
| |
| /* Set station address */ |
| if (info->index == 0) |
| rval = eth_env_get_enetaddr("ethaddr", enetaddr); |
| else |
| rval = eth_env_get_enetaddr("eth1addr", enetaddr); |
| |
| if (!rval) { |
| puts("Please set a valid MAC address\n"); |
| return -EINVAL; |
| } |
| |
| fec_set_hwaddr(fecp, enetaddr); |
| |
| /* Set Opcode/Pause Duration Register */ |
| fecp->opd = 0x00010020; |
| |
| /* Setup Buffers and Buffer Descriptors */ |
| info->rx_idx = 0; |
| info->tx_idx = 0; |
| |
| /* Setup Receiver Buffer Descriptors (13.14.24.18) |
| * Settings: Empty, Wrap */ |
| for (i = 0; i < PKTBUFSRX; i++) { |
| info->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; |
| info->rxbd[i].cbd_datlen = PKTSIZE_ALIGN; |
| info->rxbd[i].cbd_bufaddr = (uint) net_rx_packets[i]; |
| } |
| info->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; |
| |
| /* Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) |
| * Settings: Last, Tx CRC */ |
| for (i = 0; i < CONFIG_SYS_TX_ETH_BUFFER; i++) { |
| info->txbd[i].cbd_sc = 0; |
| info->txbd[i].cbd_datlen = 0; |
| info->txbd[i].cbd_bufaddr = (uint) (&info->txbuf[0]); |
| } |
| info->txbd[CONFIG_SYS_TX_ETH_BUFFER - 1].cbd_sc |= BD_ENET_TX_WRAP; |
| |
| info->used_tbd_idx = 0; |
| info->clean_tbd_num = CONFIG_SYS_TX_ETH_BUFFER; |
| |
| /* Set Rx FIFO alarm and granularity value */ |
| fecp->rfcr = 0x0c000000; |
| fecp->rfar = 0x0000030c; |
| |
| /* Set Tx FIFO granularity value */ |
| fecp->tfcr = FIFO_CTRL_FRAME | FIFO_CTRL_GR(6) | 0x00040000; |
| fecp->tfar = 0x00000080; |
| |
| fecp->tfwr = 0x2; |
| fecp->ctcwr = 0x03000000; |
| |
| /* Enable DMA receive task */ |
| MCD_startDma(info->rx_task, |
| (s8 *)info->rxbd, |
| 0, |
| (s8 *)&fecp->rfdr, |
| 4, |
| 0, |
| 4, |
| info->rx_init, |
| info->rx_pri, |
| (MCD_FECRX_DMA | MCD_TT_FLAGS_DEF), |
| (MCD_NO_CSUM | MCD_NO_BYTE_SWAP) |
| ); |
| |
| /* Enable DMA tx task with no ready buffer descriptors */ |
| MCD_startDma(info->tx_task, |
| (s8 *)info->txbd, |
| 0, |
| (s8 *)&fecp->tfdr, |
| 4, |
| 0, |
| 4, |
| info->tx_init, |
| info->tx_pri, |
| (MCD_FECTX_DMA | MCD_TT_FLAGS_DEF), |
| (MCD_NO_CSUM | MCD_NO_BYTE_SWAP) |
| ); |
| |
| /* Now enable the transmit and receive processing */ |
| fecp->ecr |= FEC_ECR_ETHER_EN; |
| |
| return 0; |
| } |
| |
| static int mcdmafec_init(struct udevice *dev) |
| { |
| return fec_init(dev); |
| } |
| |
| static int mcdmafec_send(struct udevice *dev, void *packet, int length) |
| { |
| struct fec_info_dma *info = dev->priv; |
| cbd_t *p_tbd, *p_used_tbd; |
| u16 phy_status; |
| |
| miiphy_read(dev->name, info->phy_addr, MII_BMSR, &phy_status); |
| |
| /* process all the consumed TBDs */ |
| while (info->clean_tbd_num < CONFIG_SYS_TX_ETH_BUFFER) { |
| p_used_tbd = &info->txbd[info->used_tbd_idx]; |
| if (p_used_tbd->cbd_sc & BD_ENET_TX_READY) { |
| #ifdef ET_DEBUG |
| printf("Cannot clean TBD %d, in use\n", |
| info->clean_tbd_num); |
| #endif |
| return 0; |
| } |
| |
| /* clean this buffer descriptor */ |
| if (info->used_tbd_idx == (CONFIG_SYS_TX_ETH_BUFFER - 1)) |
| p_used_tbd->cbd_sc = BD_ENET_TX_WRAP; |
| else |
| p_used_tbd->cbd_sc = 0; |
| |
| /* update some indeces for a correct handling of TBD ring */ |
| info->clean_tbd_num++; |
| info->used_tbd_idx = (info->used_tbd_idx + 1) |
| % CONFIG_SYS_TX_ETH_BUFFER; |
| } |
| |
| /* Check for valid length of data. */ |
| if (length > 1500 || length <= 0) |
| return -1; |
| |
| /* Check the number of vacant TxBDs. */ |
| if (info->clean_tbd_num < 1) { |
| printf("No available TxBDs ...\n"); |
| return -1; |
| } |
| |
| /* Get the first TxBD to send the mac header */ |
| p_tbd = &info->txbd[info->tx_idx]; |
| p_tbd->cbd_datlen = length; |
| p_tbd->cbd_bufaddr = (u32)packet; |
| p_tbd->cbd_sc |= BD_ENET_TX_LAST | BD_ENET_TX_TC | BD_ENET_TX_READY; |
| info->tx_idx = (info->tx_idx + 1) % CONFIG_SYS_TX_ETH_BUFFER; |
| |
| /* Enable DMA transmit task */ |
| MCD_continDma(info->tx_task); |
| |
| info->clean_tbd_num -= 1; |
| |
| /* wait until frame is sent . */ |
| while (p_tbd->cbd_sc & BD_ENET_TX_READY) |
| udelay(10); |
| |
| return (int)(info->txbd[info->tx_idx].cbd_sc & BD_ENET_TX_STATS); |
| } |
| |
| static int mcdmafec_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct fec_info_dma *info = dev->priv; |
| volatile fecdma_t *fecp = (fecdma_t *)info->iobase; |
| |
| cbd_t *prbd = &info->rxbd[info->rx_idx]; |
| u32 ievent; |
| int frame_length, len = 0; |
| |
| /* Check if any critical events have happened */ |
| ievent = fecp->eir; |
| if (ievent != 0) { |
| fecp->eir = ievent; |
| |
| if (ievent & (FEC_EIR_BABT | FEC_EIR_TXERR | FEC_EIR_RXERR)) { |
| printf("fec_recv: error\n"); |
| fec_halt(dev); |
| fec_init(dev); |
| return 0; |
| } |
| |
| if (ievent & FEC_EIR_HBERR) { |
| /* Heartbeat error */ |
| fecp->tcr |= FEC_TCR_GTS; |
| } |
| |
| if (ievent & FEC_EIR_GRA) { |
| /* Graceful stop complete */ |
| if (fecp->tcr & FEC_TCR_GTS) { |
| printf("fec_recv: tcr_gts\n"); |
| fec_halt(dev); |
| fecp->tcr &= ~FEC_TCR_GTS; |
| fec_init(dev); |
| } |
| } |
| } |
| |
| if (!(prbd->cbd_sc & BD_ENET_RX_EMPTY)) { |
| if ((prbd->cbd_sc & BD_ENET_RX_LAST) && |
| !(prbd->cbd_sc & BD_ENET_RX_ERR) && |
| ((prbd->cbd_datlen - 4) > 14)) { |
| /* Get buffer address and size */ |
| frame_length = prbd->cbd_datlen - 4; |
| |
| /* Fill the buffer and pass it to upper layers */ |
| net_process_received_packet((uchar *)prbd->cbd_bufaddr, |
| frame_length); |
| len = frame_length; |
| } |
| |
| /* Reset buffer descriptor as empty */ |
| if (info->rx_idx == (PKTBUFSRX - 1)) |
| prbd->cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); |
| else |
| prbd->cbd_sc = BD_ENET_RX_EMPTY; |
| |
| prbd->cbd_datlen = PKTSIZE_ALIGN; |
| |
| /* Now, we have an empty RxBD, restart the DMA receive task */ |
| MCD_continDma(info->rx_task); |
| |
| /* Increment BD count */ |
| info->rx_idx = (info->rx_idx + 1) % PKTBUFSRX; |
| } |
| |
| return len; |
| } |
| |
| static void mcdmafec_halt(struct udevice *dev) |
| { |
| fec_halt(dev); |
| } |
| |
| static const struct eth_ops mcdmafec_ops = { |
| .start = mcdmafec_init, |
| .send = mcdmafec_send, |
| .recv = mcdmafec_recv, |
| .stop = mcdmafec_halt, |
| }; |
| |
| /* |
| * Boot sequence, called just after mcffec_ofdata_to_platdata, |
| * as DM way, it replaces old mcffec_initialize. |
| */ |
| static int mcdmafec_probe(struct udevice *dev) |
| { |
| struct fec_info_dma *info = dev->priv; |
| struct eth_pdata *pdata = dev_get_platdata(dev); |
| int node = dev_of_offset(dev); |
| int retval; |
| const u32 *val; |
| |
| info->index = dev->seq; |
| info->iobase = pdata->iobase; |
| info->miibase = pdata->iobase; |
| info->phy_addr = -1; |
| |
| val = fdt_getprop(gd->fdt_blob, node, "rx-task", NULL); |
| if (val) |
| info->rx_task = fdt32_to_cpu(*val); |
| |
| val = fdt_getprop(gd->fdt_blob, node, "tx-task", NULL); |
| if (val) |
| info->tx_task = fdt32_to_cpu(*val); |
| |
| val = fdt_getprop(gd->fdt_blob, node, "rx-prioprity", NULL); |
| if (val) |
| info->rx_pri = fdt32_to_cpu(*val); |
| |
| val = fdt_getprop(gd->fdt_blob, node, "tx-prioprity", NULL); |
| if (val) |
| info->tx_pri = fdt32_to_cpu(*val); |
| |
| val = fdt_getprop(gd->fdt_blob, node, "rx-init", NULL); |
| if (val) |
| info->rx_init = fdt32_to_cpu(*val); |
| |
| val = fdt_getprop(gd->fdt_blob, node, "tx-init", NULL); |
| if (val) |
| info->tx_init = fdt32_to_cpu(*val); |
| |
| #ifdef CONFIG_SYS_FEC_BUF_USE_SRAM |
| u32 tmp = CONFIG_SYS_INIT_RAM_ADDR + 0x1000; |
| #endif |
| init_eth_info(info); |
| |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) |
| info->bus = mdio_alloc(); |
| if (!info->bus) |
| return -ENOMEM; |
| strncpy(info->bus->name, dev->name, MDIO_NAME_LEN); |
| info->bus->read = mcffec_miiphy_read; |
| info->bus->write = mcffec_miiphy_write; |
| |
| retval = mdio_register(info->bus); |
| if (retval < 0) |
| return retval; |
| #endif |
| |
| return 0; |
| } |
| |
| static int mcdmafec_remove(struct udevice *dev) |
| { |
| struct fec_info_dma *priv = dev_get_priv(dev); |
| |
| mdio_unregister(priv->bus); |
| mdio_free(priv->bus); |
| |
| return 0; |
| } |
| |
| /* |
| * Boot sequence, called 1st |
| */ |
| static int mcdmafec_ofdata_to_platdata(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev_get_platdata(dev); |
| const u32 *val; |
| |
| pdata->iobase = (phys_addr_t)devfdt_get_addr(dev); |
| /* Default to 10Mbit/s */ |
| pdata->max_speed = 10; |
| |
| val = fdt_getprop(gd->fdt_blob, dev_of_offset(dev), "max-speed", NULL); |
| if (val) |
| pdata->max_speed = fdt32_to_cpu(*val); |
| |
| return 0; |
| } |
| |
| static const struct udevice_id mcdmafec_ids[] = { |
| { .compatible = "fsl,mcf-dma-fec" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(mcffec) = { |
| .name = "mcdmafec", |
| .id = UCLASS_ETH, |
| .of_match = mcdmafec_ids, |
| .ofdata_to_platdata = mcdmafec_ofdata_to_platdata, |
| .probe = mcdmafec_probe, |
| .remove = mcdmafec_remove, |
| .ops = &mcdmafec_ops, |
| .priv_auto_alloc_size = sizeof(struct fec_info_dma), |
| .platdata_auto_alloc_size = sizeof(struct eth_pdata), |
| }; |