| /* |
| * OMAP EHCI port support |
| * Based on LINUX KERNEL |
| * drivers/usb/host/ehci-omap.c and drivers/mfd/omap-usb-host.c |
| * |
| * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com* |
| * Author: Govindraj R <govindraj.raja@ti.com> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 of |
| * the License as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program. If not, see <http://www.gnu.org/licenses/>. |
| */ |
| |
| #ifndef _OMAP_COMMON_EHCI_H_ |
| #define _OMAP_COMMON_EHCI_H_ |
| |
| enum usbhs_omap_port_mode { |
| OMAP_USBHS_PORT_MODE_UNUSED, |
| OMAP_EHCI_PORT_MODE_PHY, |
| OMAP_EHCI_PORT_MODE_TLL, |
| OMAP_EHCI_PORT_MODE_HSIC, |
| }; |
| |
| #ifdef CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS |
| #define OMAP_HS_USB_PORTS CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS |
| #else |
| #define OMAP_HS_USB_PORTS 3 |
| #endif |
| |
| #define is_ehci_phy_mode(x) ((x) == OMAP_EHCI_PORT_MODE_PHY) |
| #define is_ehci_tll_mode(x) ((x) == OMAP_EHCI_PORT_MODE_TLL) |
| #define is_ehci_hsic_mode(x) ((x) == OMAP_EHCI_PORT_MODE_HSIC) |
| |
| /* Values of UHH_REVISION - Note: these are not given in the TRM */ |
| #define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */ |
| #define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */ |
| #define OMAP_USBHS_REV2_1 0x50700101 /* OMAP5 */ |
| |
| /* UHH Register Set */ |
| #define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2) |
| #define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3) |
| #define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4) |
| #define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5) |
| |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS 1 |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11) |
| #define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12) |
| #define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31) |
| |
| #define OMAP_P1_MODE_CLEAR (3 << 16) |
| #define OMAP_P1_MODE_TLL (1 << 16) |
| #define OMAP_P1_MODE_HSIC (3 << 16) |
| #define OMAP_P2_MODE_CLEAR (3 << 18) |
| #define OMAP_P2_MODE_TLL (1 << 18) |
| #define OMAP_P2_MODE_HSIC (3 << 18) |
| #define OMAP_P3_MODE_CLEAR (3 << 20) |
| #define OMAP_P3_MODE_HSIC (3 << 20) |
| |
| /* EHCI Register Set */ |
| #define EHCI_INSNREG04_DISABLE_UNSUSPEND (1 << 5) |
| #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT 31 |
| #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT 24 |
| #define EHCI_INSNREG05_ULPI_OPSEL_SHIFT 22 |
| #define EHCI_INSNREG05_ULPI_REGADD_SHIFT 16 |
| |
| #define OMAP_REV1_TLL_CHANNEL_COUNT 3 |
| #define OMAP_REV2_TLL_CHANNEL_COUNT 2 |
| |
| /* TLL Register Set */ |
| #define OMAP_TLL_CHANNEL_CONF(num) (0x004 * num) |
| #define OMAP_TLL_CHANNEL_CONF_DRVVBUS (1 << 16) |
| #define OMAP_TLL_CHANNEL_CONF_CHRGVBUS (1 << 15) |
| #define OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF (1 << 11) |
| #define OMAP_TLL_CHANNEL_CONF_CHANMODE_TRANSPARENT_UTMI (2 << 1) |
| #define OMAP_TLL_CHANNEL_CONF_CHANEN 1 |
| |
| struct omap_usbhs_board_data { |
| enum usbhs_omap_port_mode port_mode[OMAP_HS_USB_PORTS]; |
| }; |
| |
| struct omap_usbtll { |
| u32 rev; /* 0x00 */ |
| u32 hwinfo; /* 0x04 */ |
| u8 reserved1[0x8]; |
| u32 sysc; /* 0x10 */ |
| u32 syss; /* 0x14 */ |
| u32 irqst; /* 0x18 */ |
| u32 irqen; /* 0x1c */ |
| u8 reserved2[0x10]; |
| u32 shared_conf; /* 0x30 */ |
| u8 reserved3[0xc]; |
| u32 channel_conf; /* 0x40 */ |
| }; |
| |
| struct omap_uhh { |
| u32 rev; /* 0x00 */ |
| u32 hwinfo; /* 0x04 */ |
| u8 reserved1[0x8]; |
| u32 sysc; /* 0x10 */ |
| u32 syss; /* 0x14 */ |
| u8 reserved2[0x28]; |
| u32 hostconfig; /* 0x40 */ |
| u32 debugcsr; /* 0x44 */ |
| }; |
| |
| struct omap_ehci { |
| u32 hccapbase; /* 0x00 */ |
| u32 hcsparams; /* 0x04 */ |
| u32 hccparams; /* 0x08 */ |
| u8 reserved1[0x04]; |
| u32 usbcmd; /* 0x10 */ |
| u32 usbsts; /* 0x14 */ |
| u32 usbintr; /* 0x18 */ |
| u32 frindex; /* 0x1c */ |
| u32 ctrldssegment; /* 0x20 */ |
| u32 periodiclistbase; /* 0x24 */ |
| u32 asysnclistaddr; /* 0x28 */ |
| u8 reserved2[0x24]; |
| u32 configflag; /* 0x50 */ |
| u32 portsc_i; /* 0x54 */ |
| u8 reserved3[0x38]; |
| u32 insreg00; /* 0x90 */ |
| u32 insreg01; /* 0x94 */ |
| u32 insreg02; /* 0x98 */ |
| u32 insreg03; /* 0x9c */ |
| u32 insreg04; /* 0xa0 */ |
| u32 insreg05_utmi_ulpi; /* 0xa4 */ |
| u32 insreg06; /* 0xa8 */ |
| u32 insreg07; /* 0xac */ |
| u32 insreg08; /* 0xb0 */ |
| }; |
| |
| /* |
| * FIXME: forward declaration of this structs needed because omap got the |
| * ehci implementation backwards. move out ehci_hcd_x from board files |
| */ |
| struct ehci_hccr; |
| struct ehci_hcor; |
| |
| int omap_ehci_hcd_init(struct omap_usbhs_board_data *usbhs_pdata, |
| struct ehci_hccr **hccr, struct ehci_hcor **hcor); |
| int omap_ehci_hcd_stop(void); |
| |
| #endif /* _OMAP_COMMON_EHCI_H_ */ |