| /* |
| * (C) Copyright 2001 |
| * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| * board/config.h - configuration options, board specific |
| */ |
| |
| /************************************************************************* |
| * (c) 2002 Datentechnik AG - Project: Dino |
| * |
| * |
| * $Id: DB64360.h,v 1.3 2003/04/26 04:58:13 brad Exp $ |
| * |
| ************************************************************************/ |
| |
| /************************************************************************* |
| * |
| * History: |
| * |
| * $Log: DB64360.h,v $ |
| * Revision 1.3 2003/04/26 04:58:13 brad |
| * Cosmetic changes and compiler warning cleanups |
| * |
| * Revision 1.2 2003/04/23 15:48:15 ingo |
| * mem. map output added |
| * |
| * Revision 1.1 2003/04/17 09:31:42 ias |
| * keymile changes 17_04_2003 |
| * |
| * Revision 1.10 2003/03/06 12:25:04 ias |
| * 750 FX CPU HID settings updated |
| * |
| * Revision 1.9 2003/03/03 16:14:36 ias |
| * cleanup compiler warnings of printf fuctions |
| * |
| * Revision 1.8 2003/03/03 15:11:44 ias |
| * Marvell MPSC-UART is working |
| * |
| * Revision 1.7 2003/02/26 12:15:45 ssu |
| * adapted default parameters to new board flash address |
| * |
| * Revision 1.6 2003/02/25 14:55:42 ssu |
| * changed default environment parameters |
| * |
| * Revision 1.5 2003/02/21 17:14:23 ias |
| * added extended SPD handling |
| * |
| * Revision 1.4 2003/01/14 09:16:08 ias |
| * PPCBoot for Marvel Beta 0.9 |
| * |
| * Revision 1.3 2002/12/03 13:56:26 ias |
| * Environment in flash support added |
| * |
| * Revision 1.2 2002/11/29 16:53:29 ias |
| * Flash support for STM added |
| * |
| * Revision 1.1 2002/11/29 13:36:31 ias |
| * Revision 0.1 of PPCBOOT (1.1.5) for Marvell DB64360 IBM750FX Board |
| * - working DDRRAM (only 32MByte of 128MB Modul) |
| * - working I2C Driver for SPD EEPROM read |
| * - working DUART 16650 for Serial Console |
| * - working "console" |
| * |
| * |
| * |
| ************************************************************************/ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* This define must be before the core.h include */ |
| #define CONFIG_DB64360 1 /* this is an DB64360 board */ |
| |
| #ifndef __ASSEMBLY__ |
| #include "../board/Marvell/include/core.h" |
| #endif |
| |
| /*-----------------------------------------------------*/ |
| /* #include "../board/db64360/local.h" */ |
| #ifndef __LOCAL_H |
| #define __LOCAL_H |
| |
| /* first ethernet */ |
| #define CONFIG_ETHADDR 64:36:00:00:00:01 |
| /* next two ethernet hwaddrs */ |
| #define CONFIG_HAS_ETH1 |
| #define CONFIG_ETH1ADDR 64:36:00:00:00:02 |
| /* in the atlantis 64360 we have only 2 ETH port on the board, |
| if we use PCI it has its own MAC addr */ |
| |
| #define CONFIG_ENV_OVERWRITE |
| #endif /* __CONFIG_H */ |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| |
| #define CONFIG_74xx /* we have a 750FX (override local.h) */ |
| |
| #define CONFIG_DB64360 1 /* this is an DB64360 board */ |
| |
| #define CONFIG_SYS_TEXT_BASE 0xfff00000 |
| |
| #define CONFIG_BAUDRATE 115200 /* console baudrate = 115000 */ |
| /*ronen - we don't use the global CONFIG_ECC, since in the global ecc we initialize the |
| DRAM for ECC in the phase we are relocating to it, which isn't so sufficient. |
| so we will define our ECC CONFIG and initilize the DRAM for ECC in the DRAM initialization phase, |
| see sdram_init.c */ |
| #undef CONFIG_ECC /* enable ECC support */ |
| #define CONFIG_MV64360_ECC |
| |
| /* which initialization functions to call for this board */ |
| #define CONFIG_MISC_INIT_R /* initialize the icache L1 */ |
| #define CONFIG_BOARD_EARLY_INIT_F |
| |
| #define CONFIG_SYS_BOARD_NAME "DB64360" |
| #define CONFIG_IDENT_STRING "Marvell DB64360 (1.1)" |
| |
| /*#define CONFIG_SYS_HUSH_PARSER */ |
| #undef CONFIG_SYS_HUSH_PARSER |
| |
| #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " |
| |
| /* |
| * The following defines let you select what serial you want to use |
| * for your console driver. |
| * |
| * what to do: |
| * to use the DUART, undef CONFIG_MPSC. If you have hacked a serial |
| * cable onto the second DUART channel, change the CONFIG_SYS_DUART port from 1 |
| * to 0 below. |
| * |
| * to use the MPSC, #define CONFIG_MPSC. If you have wired up another |
| * mpsc channel, change CONFIG_MPSC_PORT to the desired value. |
| */ |
| |
| #define CONFIG_MPSC_PORT 0 |
| |
| /* to change the default ethernet port, use this define (options: 0, 1, 2) */ |
| #define CONFIG_NET_MULTI |
| #define MV_ETH_DEVS 2 |
| |
| /* #undef CONFIG_ETHER_PORT_MII */ |
| #if 0 |
| #define CONFIG_BOOTDELAY -1 /* autoboot disabled */ |
| #else |
| #define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ |
| #endif |
| #define CONFIG_ZERO_BOOTDELAY_CHECK |
| |
| |
| #undef CONFIG_BOOTARGS |
| /*#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" */ |
| |
| /* ronen - autoboot using tftp */ |
| #if (CONFIG_BOOTDELAY >= 0) |
| #define CONFIG_BOOTCOMMAND "tftpboot 0x400000 uImage;\ |
| setenv bootargs ${bootargs} ${bootargs_root} nfsroot=${serverip}:${rootpath} \ |
| ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000; " |
| |
| #define CONFIG_BOOTARGS "console=ttyS0,115200" |
| |
| #endif |
| |
| /* ronen - the u-boot.bin should be ~0x30000 bytes */ |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "burn_uboot_sep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF4ffff; \ |
| cp.b 100000 FFF00000 0x40000;protect on 1:0-4;\0" \ |
| "burn_uboot_dep= tftp 100000 u-boot.bin;protect off all;era FFF00000 FFF7ffff; \ |
| cp.b 100000 FFF00000 0x40000;protect on 1:0-7;\0" \ |
| "bootargs_root=root=/dev/nfs rw\0" \ |
| "bootargs_end=:::DB64360:eth0:none \0"\ |
| "ethprime=mv_enet0\0"\ |
| "standalone=fsload 0x400000 uImage;setenv bootargs ${bootargs} root=/dev/mtdblock/0 rw \ |
| ip=${ipaddr}:${serverip}${bootargs_end}; bootm 0x400000;\0" |
| |
| /* --------------------------------------------------------------------------------------------------------------- */ |
| /* New bootcommands for Marvell DB64360 c 2002 Ingo Assmus */ |
| |
| #define CONFIG_IPADDR 10.2.40.90 |
| |
| #define CONFIG_SERIAL "No. 1" |
| #define CONFIG_SERVERIP 10.2.1.126 |
| #define CONFIG_ROOTPATH /mnt/yellow_dog_mini |
| |
| |
| #define CONFIG_TESTDRAMDATA y |
| #define CONFIG_TESTDRAMADDRESS n |
| #define CONFIG_TESETDRAMWALK n |
| |
| /* --------------------------------------------------------------------------------------------------------------- */ |
| |
| #define CONFIG_LOADS_ECHO 0 /* echo off for serial download */ |
| #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate changes */ |
| |
| #undef CONFIG_WATCHDOG /* watchdog disabled */ |
| #undef CONFIG_ALTIVEC /* undef to disable */ |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_SUBNETMASK |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| |
| |
| /* |
| * JFFS2 partitions |
| * |
| */ |
| /* No command line, one static partition, whole device */ |
| #undef CONFIG_CMD_MTDPARTS |
| #define CONFIG_JFFS2_DEV "nor1" |
| #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF |
| #define CONFIG_JFFS2_PART_OFFSET 0x00000000 |
| |
| /* mtdparts command line support */ |
| |
| /* Use first bank for JFFS2, second bank contains U-Boot. |
| * |
| * Note: fake mtd_id's used, no linux mtd map file. |
| */ |
| /* |
| #define CONFIG_CMD_MTDPARTS |
| #define MTDIDS_DEFAULT "nor1=db64360-1" |
| #define MTDPARTS_DEFAULT "mtdparts=db64360-1:-(jffs2)" |
| */ |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_ASKENV |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_EEPROM |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_JFFS2 |
| #define CONFIG_CMD_PCI |
| #define CONFIG_CMD_NET |
| |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| #define CONFIG_SYS_I2C_MULTI_EEPROMS |
| #define CONFIG_SYS_I2C_SPEED 40000 /* I2C speed default */ |
| |
| /* #define CONFIG_SYS_GT_DUAL_CPU also for JTAG even with one cpu */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
| #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ |
| |
| /*#define CONFIG_SYS_MEMTEST_START 0x00400000 memtest works on */ |
| /*#define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */ |
| /*#define CONFIG_SYS_MEMTEST_END 0x07c00000 4 ... 124 MB in DRAM */ |
| |
| /* |
| #define CONFIG_SYS_DRAM_TEST |
| * DRAM tests |
| * CONFIG_SYS_DRAM_TEST - enables the following tests. |
| * |
| * CONFIG_SYS_DRAM_TEST_DATA - Enables test for shorted or open data lines |
| * Environment variable 'test_dram_data' must be |
| * set to 'y'. |
| * CONFIG_SYS_DRAM_TEST_DATA - Enables test to verify that each word is uniquely |
| * addressable. Environment variable |
| * 'test_dram_address' must be set to 'y'. |
| * CONFIG_SYS_DRAM_TEST_WALK - Enables test a 64-bit walking ones pattern test. |
| * This test takes about 6 minutes to test 64 MB. |
| * Environment variable 'test_dram_walk' must be |
| * set to 'y'. |
| */ |
| #define CONFIG_SYS_DRAM_TEST |
| #if defined(CONFIG_SYS_DRAM_TEST) |
| #define CONFIG_SYS_MEMTEST_START 0x00400000 /* memtest works on */ |
| /* #define CONFIG_SYS_MEMTEST_END 0x00C00000 4 ... 12 MB in DRAM */ |
| #define CONFIG_SYS_MEMTEST_END 0x07c00000 /* 4 ... 124 MB in DRAM */ |
| #define CONFIG_SYS_DRAM_TEST_DATA |
| #define CONFIG_SYS_DRAM_TEST_ADDRESS |
| #define CONFIG_SYS_DRAM_TEST_WALK |
| #endif /* CONFIG_SYS_DRAM_TEST */ |
| |
| #undef CONFIG_DISPLAY_MEMMAP /* at the end of the bootprocess show the memory map */ |
| #undef CONFIG_SYS_DISPLAY_DIMM_SPD_CONTENT /* show SPD content during boot */ |
| |
| #define CONFIG_SYS_LOAD_ADDR 0x00400000 /* default load address */ |
| |
| #define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */ |
| /*ronen - this the Sys clock (cpu bus,internal dram and SDRAM) */ |
| #define CONFIG_SYS_BUS_CLK 133000000 /* 133 MHz (CPU = 5*Bus = 666MHz) */ |
| |
| #define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_LOP 7 /* define the SDRAM cycle count */ |
| #define CONFIG_SYS_DDR_SDRAM_CYCLE_COUNT_ROP 50 /* for 400MHZ -> 5.0 ns, for 133MHZ -> 7.50 ns */ |
| |
| /*ronen - this is the Tclk (MV64360 core) */ |
| #define CONFIG_SYS_TCLK 133000000 |
| |
| |
| #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } |
| |
| #define CONFIG_SYS_750FX_HID0 0x8000c084 |
| #define CONFIG_SYS_750FX_HID1 0x54800000 |
| #define CONFIG_SYS_750FX_HID2 0x00000000 |
| |
| /* |
| * Low Level Configuration Settings |
| * (address mappings, register initial values, etc.) |
| * You should know what you are doing if you make changes here. |
| */ |
| |
| /*----------------------------------------------------------------------- |
| * Definitions for initial stack pointer and data area |
| */ |
| |
| /* |
| * When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS |
| * To an unused memory region. The stack will remain in cache until RAM |
| * is initialized |
| */ |
| #define CONFIG_SYS_INIT_RAM_LOCK |
| #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000 /* unused memory region */ |
| #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for init data */ |
| #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - CONFIG_SYS_GBL_DATA_SIZE) |
| |
| #define RELOCATE_INTERNAL_RAM_ADDR |
| #ifdef RELOCATE_INTERNAL_RAM_ADDR |
| #define CONFIG_SYS_INTERNAL_RAM_ADDR 0xf8000000 |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * Start addresses for the final memory configuration |
| * (Set up by the startup code) |
| * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
| */ |
| #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
| /* Dummies for BAT 4-7 */ |
| #define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */ |
| #define CONFIG_SYS_SDRAM2_BASE 0x20000000 |
| #define CONFIG_SYS_SDRAM3_BASE 0x30000000 |
| #define CONFIG_SYS_SDRAM4_BASE 0x40000000 |
| #define CONFIG_SYS_FLASH_BASE 0xfff00000 |
| |
| #define CONFIG_SYS_DFL_BOOTCS_BASE 0xff800000 |
| #define CONFIG_VERY_BIG_RAM /* we will use up to 256M memory for cause we are short of BATS*/ |
| |
| #define BRIDGE_REG_BASE_BOOTM 0xfbe00000 /* this paramaters are used when booting the linux kernel */ |
| #define UART_BASE_BOOTM 0xfbb00000 /* in order to be sync with the kernel parameters. */ |
| #define PCI0_IO_BASE_BOOTM 0xfd000000 |
| |
| #define CONFIG_SYS_RESET_ADDRESS 0xfff00100 |
| #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ |
| #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE |
| #define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */ |
| |
| /* areas to map different things with the GT in physical space */ |
| #define CONFIG_SYS_DRAM_BANKS 4 |
| |
| /* What to put in the bats. */ |
| #define CONFIG_SYS_MISC_REGION_BASE 0xf0000000 |
| |
| /* Peripheral Device section */ |
| |
| /*******************************************************/ |
| /* We have on the db64360 Board : */ |
| /* GT-Chipset Register Area */ |
| /* GT-Chipset internal SRAM 256k */ |
| /* SRAM on external device module */ |
| /* Real time clock on external device module */ |
| /* dobble UART on external device module */ |
| /* Data flash on external device module */ |
| /* Boot flash on external device module */ |
| /*******************************************************/ |
| #define CONFIG_SYS_DFL_GT_REGS 0x14000000 /* boot time GT_REGS */ |
| #define CONFIG_SYS_DB64360_RESET_ADDR 0x14000000 /* After power on Reset the DB64360 is here */ |
| |
| /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ |
| #define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers will be mapped here */ |
| #define CONFIG_SYS_DEV_BASE 0xfc000000 /* GT Devices CS start here */ |
| |
| #define CONFIG_SYS_DEV0_SPACE CONFIG_SYS_DEV_BASE /* DEV_CS0 device modul sram */ |
| #define CONFIG_SYS_DEV1_SPACE (CONFIG_SYS_DEV0_SPACE + CONFIG_SYS_DEV0_SIZE) /* DEV_CS1 device modul real time clock (rtc) */ |
| #define CONFIG_SYS_DEV2_SPACE (CONFIG_SYS_DEV1_SPACE + CONFIG_SYS_DEV1_SIZE) /* DEV_CS2 device modul doubel uart (duart) */ |
| #define CONFIG_SYS_DEV3_SPACE (CONFIG_SYS_DEV2_SPACE + CONFIG_SYS_DEV2_SIZE) /* DEV_CS3 device modul large flash */ |
| |
| #define CONFIG_SYS_DEV0_SIZE _8M /* db64360 sram @ 0xfc00.0000 */ |
| #define CONFIG_SYS_DEV1_SIZE _8M /* db64360 rtc @ 0xfc80.0000 */ |
| #define CONFIG_SYS_DEV2_SIZE _16M /* db64360 duart @ 0xfd00.0000 */ |
| #define CONFIG_SYS_DEV3_SIZE _16M /* db64360 flash @ 0xfe00.0000 */ |
| /*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/ |
| |
| /* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected by device width */ |
| #define CONFIG_SYS_DEV0_PAR 0x8FEFFFFF /* 32Bit sram */ |
| #define CONFIG_SYS_DEV1_PAR 0x8FCFFFFF /* 8Bit rtc */ |
| #define CONFIG_SYS_DEV2_PAR 0x8FCFFFFF /* 8Bit duart */ |
| #define CONFIG_SYS_8BIT_BOOT_PAR 0x8FCFFFFF /* 8Bit flash */ |
| #define CONFIG_SYS_32BIT_BOOT_PAR 0x8FEFFFFF /* 32Bit flash */ |
| |
| /* c 4 a 8 2 4 1 c */ |
| /* 33 22|2222|22 22|111 1|11 11|1 1 | | */ |
| /* 10 98|7654|32 10|987 6|54 32|1 098|7 654|3 210 */ |
| /* 11|00|0100|10 10|100|0 00|10 0|100 0|001 1|100 */ |
| /* 3| 0|.... ..| 2| 4 | 0 | 4 | 8 | 3 | 4 */ |
| |
| |
| /* ronen - update MPP Control MV64360*/ |
| #define CONFIG_SYS_MPP_CONTROL_0 0x02222222 |
| #define CONFIG_SYS_MPP_CONTROL_1 0x11333011 |
| #define CONFIG_SYS_MPP_CONTROL_2 0x40431111 |
| #define CONFIG_SYS_MPP_CONTROL_3 0x00000044 |
| |
| /*# define CONFIG_SYS_SERIAL_PORT_MUX 0x00000102 0=hiZ 1=MPSC0 2=ETH 0 and 2 RMII */ |
| |
| |
| # define CONFIG_SYS_GPP_LEVEL_CONTROL 0x2c600000 /* 1111 1001 0000 1111 1100 0000 0000 0000*/ |
| /* gpp[31] gpp[30] gpp[29] gpp[28] */ |
| /* gpp[27] gpp[24]*/ |
| /* gpp[19:14] */ |
| |
| /* setup new config_value for MV64360 DDR-RAM !! */ |
| # define CONFIG_SYS_SDRAM_CONFIG 0x58200400 /* 0x1400 copied from Dink32 bzw. VxWorks*/ |
| |
| #define CONFIG_SYS_DUART_IO CONFIG_SYS_DEV2_SPACE |
| #define CONFIG_SYS_DUART_CHAN 1 /* channel to use for console */ |
| #define CONFIG_SYS_INIT_CHAN1 |
| #define CONFIG_SYS_INIT_CHAN2 |
| |
| #define SRAM_BASE CONFIG_SYS_DEV0_SPACE |
| #define SRAM_SIZE 0x00100000 /* 1 MB of sram */ |
| |
| |
| /*----------------------------------------------------------------------- |
| * PCI stuff |
| *----------------------------------------------------------------------- |
| */ |
| |
| #define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */ |
| #define PCI_HOST_FORCE 1 /* configure as pci host */ |
| #define PCI_HOST_AUTO 2 /* detected via arbiter enable */ |
| |
| #define CONFIG_PCI /* include pci support */ |
| #define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */ |
| #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| #define CONFIG_EEPRO100 /* ronen - Support for Intel 82557/82559/82559ER chips */ |
| |
| /* PCI MEMORY MAP section */ |
| #define CONFIG_SYS_PCI0_MEM_BASE 0x80000000 |
| #define CONFIG_SYS_PCI0_MEM_SIZE _128M |
| #define CONFIG_SYS_PCI1_MEM_BASE 0x88000000 |
| #define CONFIG_SYS_PCI1_MEM_SIZE _128M |
| |
| #define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE) |
| #define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE) |
| |
| /* PCI I/O MAP section */ |
| #define CONFIG_SYS_PCI0_IO_BASE 0xfa000000 |
| #define CONFIG_SYS_PCI0_IO_SIZE _16M |
| #define CONFIG_SYS_PCI1_IO_BASE 0xfb000000 |
| #define CONFIG_SYS_PCI1_IO_SIZE _16M |
| |
| #define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE) |
| #define CONFIG_SYS_PCI0_IO_SPACE_PCI (CONFIG_SYS_PCI0_IO_BASE) /* ronen we want phy=bus 0x00000000 */ |
| #define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE) |
| #define CONFIG_SYS_PCI1_IO_SPACE_PCI (CONFIG_SYS_PCI1_IO_BASE) /* ronen we want phy=bus 0x00000000 */ |
| |
| #if defined (CONFIG_750CX) |
| #define CONFIG_SYS_PCI_IDSEL 0x0 |
| #else |
| #define CONFIG_SYS_PCI_IDSEL 0x30 |
| #endif |
| /*---------------------------------------------------------------------- |
| * Initial BAT mappings |
| */ |
| |
| /* NOTES: |
| * 1) GUARDED and WRITE_THRU not allowed in IBATS |
| * 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT |
| */ |
| |
| /* SDRAM */ |
| #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT) |
| #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U |
| |
| /* init ram */ |
| #define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) |
| #define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP) |
| #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L |
| #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U |
| |
| /* PCI0, PCI1 in one BAT */ |
| #define CONFIG_SYS_IBAT2L BATL_NO_ACCESS |
| #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U |
| #define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| |
| /* GT regs, bootrom, all the devices, PCI I/O */ |
| #define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW) |
| #define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M) |
| #define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE) |
| #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U |
| |
| /* I2C addresses for the two DIMM SPD chips */ |
| #define DIMM0_I2C_ADDR 0x56 |
| #define DIMM1_I2C_ADDR 0x54 |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 8 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */ |
| |
| /*----------------------------------------------------------------------- |
| * FLASH organization |
| */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ |
| #define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ |
| |
| #define CONFIG_SYS_EXTRA_FLASH_DEVICE DEVICE3 /* extra flash at device 3 */ |
| #define CONFIG_SYS_EXTRA_FLASH_WIDTH 4 /* 32 bit */ |
| #define CONFIG_SYS_BOOT_FLASH_WIDTH 1 /* 8 bit */ |
| |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ |
| #define CONFIG_SYS_FLASH_LOCK_TOUT 500 /* Timeout for Flash Lock (in ms) */ |
| #define CONFIG_SYS_FLASH_CFI 1 |
| |
| #define CONFIG_ENV_IS_IN_FLASH 1 |
| #define CONFIG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #define CONFIG_ENV_ADDR 0xFFF78000 /* Marvell 8-Bit Bootflash last sector */ |
| /* #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+CONFIG_SYS_MONITOR_LEN-CONFIG_ENV_SECT_SIZE) */ |
| |
| /*----------------------------------------------------------------------- |
| * Cache Configuration |
| */ |
| #define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */ |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ |
| #endif |
| |
| /*----------------------------------------------------------------------- |
| * L2CR setup -- make sure this is right for your board! |
| * look in include/mpc74xx.h for the defines used here |
| */ |
| |
| #define CONFIG_SYS_L2 |
| |
| |
| #if defined (CONFIG_750CX) || defined (CONFIG_750FX) |
| #define L2_INIT 0 |
| #else |
| |
| #define L2_INIT 0 |
| /* |
| #define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \ |
| L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT) |
| */ |
| #endif |
| |
| #define L2_ENABLE (L2_INIT | L2CR_L2E) |
| |
| #define CONFIG_SYS_BOARD_ASM_INIT 1 |
| |
| #endif /* __CONFIG_H */ |