blob: 57b9d1c421820256efdf85626f2e38bc766115d4 [file] [log] [blame]
/*
* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <config.h>
#include <common.h>
#include <command.h>
#include <asm/processor.h>
#include <pci.h>
void show_reset_reg(void)
{
unsigned long reg;
/* read clock regsiter */
printf("===== Display reset and initialize register Start =========\n");
mfclk(clk_pllc,reg);
printf("cpr_pllc = %#010x\n",reg);
mfclk(clk_plld,reg);
printf("cpr_plld = %#010x\n",reg);
mfclk(clk_primad,reg);
printf("cpr_primad = %#010x\n",reg);
mfclk(clk_primbd,reg);
printf("cpr_primbd = %#010x\n",reg);
mfclk(clk_opbd,reg);
printf("cpr_opbd = %#010x\n",reg);
mfclk(clk_perd,reg);
printf("cpr_perd = %#010x\n",reg);
mfclk(clk_mald,reg);
printf("cpr_mald = %#010x\n",reg);
/* read sdr register */
mfsdr(sdr_ebc,reg);
printf("sdr_ebc = %#010x\n",reg);
mfsdr(sdr_cp440,reg);
printf("sdr_cp440 = %#010x\n",reg);
mfsdr(sdr_xcr,reg);
printf("sdr_xcr = %#010x\n",reg);
mfsdr(sdr_xpllc,reg);
printf("sdr_xpllc = %#010x\n",reg);
mfsdr(sdr_xplld,reg);
printf("sdr_xplld = %#010x\n",reg);
mfsdr(sdr_pfc0,reg);
printf("sdr_pfc0 = %#010x\n",reg);
mfsdr(sdr_pfc1,reg);
printf("sdr_pfc1 = %#010x\n",reg);
mfsdr(sdr_cust0,reg);
printf("sdr_cust0 = %#010x\n",reg);
mfsdr(sdr_cust1,reg);
printf("sdr_cust1 = %#010x\n",reg);
mfsdr(sdr_uart0,reg);
printf("sdr_uart0 = %#010x\n",reg);
mfsdr(sdr_uart1,reg);
printf("sdr_uart1 = %#010x\n",reg);
printf("===== Display reset and initialize register End =========\n");
}
void show_xbridge_info(void)
{
unsigned long reg;
printf("PCI-X chip control registers\n");
mfsdr(sdr_xcr, reg);
printf("sdr_xcr = %#010x\n", reg);
mfsdr(sdr_xpllc, reg);
printf("sdr_xpllc = %#010x\n", reg);
mfsdr(sdr_xplld, reg);
printf("sdr_xplld = %#010x\n", reg);
printf("PCI-X Bridge Configure registers\n");
printf("PCIX0_VENDID = %#06x\n", in16r(PCIX0_VENDID));
printf("PCIX0_DEVID = %#06x\n", in16r(PCIX0_DEVID));
printf("PCIX0_CMD = %#06x\n", in16r(PCIX0_CMD));
printf("PCIX0_STATUS = %#06x\n", in16r(PCIX0_STATUS));
printf("PCIX0_REVID = %#04x\n", in8(PCIX0_REVID));
printf("PCIX0_CACHELS = %#04x\n", in8(PCIX0_CACHELS));
printf("PCIX0_LATTIM = %#04x\n", in8(PCIX0_LATTIM));
printf("PCIX0_HDTYPE = %#04x\n", in8(PCIX0_HDTYPE));
printf("PCIX0_BIST = %#04x\n", in8(PCIX0_BIST));
printf("PCIX0_BAR0 = %#010x\n", in32r(PCIX0_BAR0));
printf("PCIX0_BAR1 = %#010x\n", in32r(PCIX0_BAR1));
printf("PCIX0_BAR2 = %#010x\n", in32r(PCIX0_BAR2));
printf("PCIX0_BAR3 = %#010x\n", in32r(PCIX0_BAR3));
printf("PCIX0_BAR4 = %#010x\n", in32r(PCIX0_BAR4));
printf("PCIX0_BAR5 = %#010x\n", in32r(PCIX0_BAR5));
printf("PCIX0_CISPTR = %#010x\n", in32r(PCIX0_CISPTR));
printf("PCIX0_SBSSYSVID = %#010x\n", in16r(PCIX0_SBSYSVID));
printf("PCIX0_SBSSYSID = %#010x\n", in16r(PCIX0_SBSYSID));
printf("PCIX0_EROMBA = %#010x\n", in32r(PCIX0_EROMBA));
printf("PCIX0_CAP = %#04x\n", in8(PCIX0_CAP));
printf("PCIX0_INTLN = %#04x\n", in8(PCIX0_INTLN));
printf("PCIX0_INTPN = %#04x\n", in8(PCIX0_INTPN));
printf("PCIX0_MINGNT = %#04x\n", in8(PCIX0_MINGNT));
printf("PCIX0_MAXLTNCY = %#04x\n", in8(PCIX0_MAXLTNCY));
printf("PCIX0_BRDGOPT1 = %#010x\n", in32r(PCIX0_BRDGOPT1));
printf("PCIX0_BRDGOPT2 = %#010x\n", in32r(PCIX0_BRDGOPT2));
printf("PCIX0_POM0LAL = %#010x\n", in32r(PCIX0_POM0LAL));
printf("PCIX0_POM0LAH = %#010x\n", in32r(PCIX0_POM0LAH));
printf("PCIX0_POM0SA = %#010x\n", in32r(PCIX0_POM0SA));
printf("PCIX0_POM0PCILAL = %#010x\n", in32r(PCIX0_POM0PCIAL));
printf("PCIX0_POM0PCILAH = %#010x\n", in32r(PCIX0_POM0PCIAH));
printf("PCIX0_POM1LAL = %#010x\n", in32r(PCIX0_POM1LAL));
printf("PCIX0_POM1LAH = %#010x\n", in32r(PCIX0_POM1LAH));
printf("PCIX0_POM1SA = %#010x\n", in32r(PCIX0_POM1SA));
printf("PCIX0_POM1PCILAL = %#010x\n", in32r(PCIX0_POM1PCIAL));
printf("PCIX0_POM1PCILAH = %#010x\n", in32r(PCIX0_POM1PCIAH));
printf("PCIX0_POM2SA = %#010x\n", in32r(PCIX0_POM2SA));
printf("PCIX0_PIM0SA = %#010x\n", in32r(PCIX0_PIM0SA));
printf("PCIX0_PIM0LAL = %#010x\n", in32r(PCIX0_PIM0LAL));
printf("PCIX0_PIM0LAH = %#010x\n", in32r(PCIX0_PIM0LAH));
printf("PCIX0_PIM1SA = %#010x\n", in32r(PCIX0_PIM1SA));
printf("PCIX0_PIM1LAL = %#010x\n", in32r(PCIX0_PIM1LAL));
printf("PCIX0_PIM1LAH = %#010x\n", in32r(PCIX0_PIM1LAH));
printf("PCIX0_PIM2SA = %#010x\n", in32r(PCIX0_PIM1SA));
printf("PCIX0_PIM2LAL = %#010x\n", in32r(PCIX0_PIM1LAL));
printf("PCIX0_PIM2LAH = %#010x\n", in32r(PCIX0_PIM1LAH));
printf("PCIX0_XSTS = %#010x\n", in32r(PCIX0_STS));
}
int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
show_xbridge_info();
return 0;
}
U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info,
"xbriinfo - Show PCIX bridge info\n", NULL);
#define TAISHAN_PCI_DEV_ID0 0x800
#define TAISHAN_PCI_DEV_ID1 0x1000
void show_pcix_device_info(void)
{
int ii;
int dev;
u8 capp;
u8 xcapid;
u16 status;
u16 xcommand;
u32 xstatus;
for (ii = 0; ii < 2; ii++) {
if (ii == 0)
dev = TAISHAN_PCI_DEV_ID0;
else
dev = TAISHAN_PCI_DEV_ID1;
pci_read_config_word(dev, PCI_STATUS, &status);
if (status & PCI_STATUS_CAP_LIST) {
pci_read_config_byte(dev, PCI_CAPABILITY_LIST, &capp);
pci_read_config_byte(dev, (int)(capp), &xcapid);
if (xcapid == 0x07) {
pci_read_config_word(dev, (int)(capp + 2),
&xcommand);
pci_read_config_dword(dev, (int)(capp + 4),
&xstatus);
printf("BUS0 dev%d Xcommand=%#06x,Xstatus=%#010x\n",
(ii + 1), xcommand, xstatus);
} else {
printf("BUS0 dev%d PCI-X CAP ID error,"
"CAP=%#04x,XCAPID=%#04x\n",
(ii + 1), capp, xcapid);
}
} else {
printf("BUS0 dev%d not found PCI_STATUS_CAP_LIST supporting\n",
ii + 1);
}
}
}
int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc,
char *argv[])
{
show_pcix_device_info();
return 0;
}
U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info,
"xdevinfo - Show PCIX Device info\n", NULL);
extern void show_reset_reg(void);
int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
show_reset_reg();
return 0;
}
U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info,
"resetinfo - Show Reset REG info\n", NULL);