| /* |
| * (C) Copyright 2001 |
| * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc. |
| * |
| * (C) Copyright 2002 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <flash.h> |
| #include <asm/io.h> |
| #include "memio.h" |
| |
| /*---------------------------------------------------------------------*/ |
| #undef DEBUG_FLASH |
| |
| #ifdef DEBUG_FLASH |
| #define DEBUGF(fmt,args...) printf(fmt ,##args) |
| #else |
| #define DEBUGF(fmt,args...) |
| #endif |
| /*---------------------------------------------------------------------*/ |
| |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; |
| |
| static ulong flash_get_size (ulong addr, flash_info_t *info); |
| static int flash_get_offsets (ulong base, flash_info_t *info); |
| static int write_word (flash_info_t *info, ulong dest, ulong data); |
| static void flash_reset (ulong addr); |
| |
| int flash_xd_nest; |
| |
| static void flash_to_xd(void) |
| { |
| unsigned char x; |
| |
| flash_xd_nest ++; |
| |
| if (flash_xd_nest == 1) |
| { |
| DEBUGF("Flash on XD\n"); |
| x = pci_read_cfg_byte(0, 0, 0x74); |
| pci_write_cfg_byte(0, 0, 0x74, x|1); |
| } |
| } |
| |
| static void flash_to_mem(void) |
| { |
| unsigned char x; |
| |
| flash_xd_nest --; |
| |
| if (flash_xd_nest == 0) |
| { |
| DEBUGF("Flash on memory bus\n"); |
| x = pci_read_cfg_byte(0, 0, 0x74); |
| pci_write_cfg_byte(0, 0, 0x74, x&0xFE); |
| } |
| } |
| |
| unsigned long flash_init_old(void) |
| { |
| int i; |
| |
| for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) |
| { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| flash_info[i].sector_count = 0; |
| flash_info[i].size = 0; |
| } |
| |
| |
| return 1; |
| } |
| |
| unsigned long flash_init (void) |
| { |
| unsigned int i; |
| unsigned long flash_size = 0; |
| |
| flash_xd_nest = 0; |
| |
| flash_to_xd(); |
| |
| /* Init: no FLASHes known */ |
| for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| flash_info[i].sector_count = 0; |
| flash_info[i].size = 0; |
| } |
| |
| DEBUGF("\n## Get flash size @ 0x%08x\n", CONFIG_SYS_FLASH_BASE); |
| |
| flash_size = flash_get_size (CONFIG_SYS_FLASH_BASE, flash_info); |
| |
| DEBUGF("## Flash bank size: %08lx\n", flash_size); |
| |
| if (flash_size) { |
| #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE && \ |
| CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_MAX_SIZE |
| /* monitor protection ON by default */ |
| flash_protect(FLAG_PROTECT_SET, |
| CONFIG_SYS_MONITOR_BASE, |
| CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, |
| &flash_info[0]); |
| #endif |
| |
| #ifdef CONFIG_ENV_IS_IN_FLASH |
| /* ENV protection ON by default */ |
| flash_protect(FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, |
| &flash_info[0]); |
| #endif |
| |
| } else { |
| puts ("Warning: the BOOT Flash is not initialised !"); |
| } |
| |
| flash_to_mem(); |
| |
| return flash_size; |
| } |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| static ulong flash_get_size (ulong addr, flash_info_t *info) |
| { |
| short i; |
| uchar value; |
| uchar *x = (uchar *)addr; |
| |
| flash_to_xd(); |
| |
| /* Write auto select command: read Manufacturer ID */ |
| x[0x0555] = 0xAA; |
| __asm volatile ("sync\n eieio"); |
| x[0x02AA] = 0x55; |
| __asm volatile ("sync\n eieio"); |
| x[0x0555] = 0x90; |
| __asm volatile ("sync\n eieio"); |
| |
| value = x[0]; |
| __asm volatile ("sync\n eieio"); |
| |
| DEBUGF("Manuf. ID @ 0x%08lx: 0x%08x\n", (ulong)addr, value); |
| |
| switch (value | (value << 16)) { |
| case AMD_MANUFACT: |
| info->flash_id = FLASH_MAN_AMD; |
| break; |
| |
| case FUJ_MANUFACT: |
| info->flash_id = FLASH_MAN_FUJ; |
| break; |
| |
| case STM_MANUFACT: |
| info->flash_id = FLASH_MAN_STM; |
| break; |
| |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| flash_reset (addr); |
| return 0; |
| } |
| |
| value = x[1]; |
| __asm volatile ("sync\n eieio"); |
| |
| DEBUGF("Device ID @ 0x%08lx: 0x%08x\n", addr+1, value); |
| |
| switch (value) { |
| case AMD_ID_F040B: |
| DEBUGF("Am29F040B\n"); |
| info->flash_id += FLASH_AM040; |
| info->sector_count = 8; |
| info->size = 0x00080000; |
| break; /* => 512 kB */ |
| |
| case AMD_ID_LV040B: |
| DEBUGF("Am29LV040B\n"); |
| info->flash_id += FLASH_AM040; |
| info->sector_count = 8; |
| info->size = 0x00080000; |
| break; /* => 512 kB */ |
| |
| case AMD_ID_LV400T: |
| DEBUGF("Am29LV400T\n"); |
| info->flash_id += FLASH_AM400T; |
| info->sector_count = 11; |
| info->size = 0x00100000; |
| break; /* => 1 MB */ |
| |
| case AMD_ID_LV400B: |
| DEBUGF("Am29LV400B\n"); |
| info->flash_id += FLASH_AM400B; |
| info->sector_count = 11; |
| info->size = 0x00100000; |
| break; /* => 1 MB */ |
| |
| case AMD_ID_LV800T: |
| DEBUGF("Am29LV800T\n"); |
| info->flash_id += FLASH_AM800T; |
| info->sector_count = 19; |
| info->size = 0x00200000; |
| break; /* => 2 MB */ |
| |
| case AMD_ID_LV800B: |
| DEBUGF("Am29LV400B\n"); |
| info->flash_id += FLASH_AM800B; |
| info->sector_count = 19; |
| info->size = 0x00200000; |
| break; /* => 2 MB */ |
| |
| case AMD_ID_LV160T: |
| DEBUGF("Am29LV160T\n"); |
| info->flash_id += FLASH_AM160T; |
| info->sector_count = 35; |
| info->size = 0x00400000; |
| break; /* => 4 MB */ |
| |
| case AMD_ID_LV160B: |
| DEBUGF("Am29LV160B\n"); |
| info->flash_id += FLASH_AM160B; |
| info->sector_count = 35; |
| info->size = 0x00400000; |
| break; /* => 4 MB */ |
| |
| case AMD_ID_LV320T: |
| DEBUGF("Am29LV320T\n"); |
| info->flash_id += FLASH_AM320T; |
| info->sector_count = 67; |
| info->size = 0x00800000; |
| break; /* => 8 MB */ |
| |
| #if 0 |
| /* Has the same ID as AMD_ID_LV320T, to be fixed */ |
| case AMD_ID_LV320B: |
| DEBUGF("Am29LV320B\n"); |
| info->flash_id += FLASH_AM320B; |
| info->sector_count = 67; |
| info->size = 0x00800000; |
| break; /* => 8 MB */ |
| #endif |
| |
| case AMD_ID_LV033C: |
| DEBUGF("Am29LV033C\n"); |
| info->flash_id += FLASH_AM033C; |
| info->sector_count = 64; |
| info->size = 0x01000000; |
| break; /* => 16Mb */ |
| |
| case STM_ID_F040B: |
| DEBUGF("M29F040B\n"); |
| info->flash_id += FLASH_AM040; |
| info->sector_count = 8; |
| info->size = 0x00080000; |
| break; /* => 512 kB */ |
| |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| flash_reset (addr); |
| flash_to_mem(); |
| return (0); /* => no or unknown flash */ |
| |
| } |
| |
| if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { |
| printf ("** ERROR: sector count %d > max (%d) **\n", |
| info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); |
| info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; |
| } |
| |
| if (! flash_get_offsets (addr, info)) { |
| flash_reset (addr); |
| flash_to_mem(); |
| return 0; |
| } |
| |
| /* check for protected sectors */ |
| for (i = 0; i < info->sector_count; i++) { |
| /* read sector protection at sector address, (A7 .. A0) = 0x02 */ |
| /* D0 = 1 if protected */ |
| value = in8(info->start[i] + 2); |
| iobarrier_rw(); |
| info->protect[i] = (value & 1) != 0; |
| } |
| |
| /* |
| * Reset bank to read mode |
| */ |
| flash_reset (addr); |
| |
| flash_to_mem(); |
| |
| return (info->size); |
| } |
| |
| static int flash_get_offsets (ulong base, flash_info_t *info) |
| { |
| unsigned int i; |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_AM040: |
| /* set sector offsets for uniform sector type */ |
| for (i = 0; i < info->sector_count; i++) { |
| info->start[i] = base + i * info->size / |
| info->sector_count; |
| } |
| break; |
| default: |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| int flash_erase (flash_info_t *info, int s_first, int s_last) |
| { |
| volatile ulong addr = info->start[0]; |
| int flag, prot, sect, l_sect; |
| ulong start, now, last; |
| |
| flash_to_xd(); |
| |
| if (s_first < 0 || s_first > s_last) { |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("- missing\n"); |
| } else { |
| printf ("- no sectors to erase\n"); |
| } |
| flash_to_mem(); |
| return 1; |
| } |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("Can't erase unknown flash type %08lx - aborted\n", |
| info->flash_id); |
| flash_to_mem(); |
| return 1; |
| } |
| |
| prot = 0; |
| for (sect=s_first; sect<=s_last; ++sect) { |
| if (info->protect[sect]) { |
| prot++; |
| } |
| } |
| |
| if (prot) { |
| printf ("- Warning: %d protected sectors will not be erased!\n", |
| prot); |
| } else { |
| printf ("\n"); |
| } |
| |
| l_sect = -1; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| out8(addr + 0x555, 0xAA); |
| iobarrier_rw(); |
| out8(addr + 0x2AA, 0x55); |
| iobarrier_rw(); |
| out8(addr + 0x555, 0x80); |
| iobarrier_rw(); |
| out8(addr + 0x555, 0xAA); |
| iobarrier_rw(); |
| out8(addr + 0x2AA, 0x55); |
| iobarrier_rw(); |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect<=s_last; sect++) { |
| if (info->protect[sect] == 0) { /* not protected */ |
| addr = info->start[sect]; |
| out8(addr, 0x30); |
| iobarrier_rw(); |
| l_sect = sect; |
| } |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* wait at least 80us - let's wait 1 ms */ |
| udelay (1000); |
| |
| /* |
| * We wait for the last triggered sector |
| */ |
| if (l_sect < 0) |
| goto DONE; |
| |
| start = get_timer (0); |
| last = start; |
| addr = info->start[l_sect]; |
| |
| DEBUGF ("Start erase timeout: %d\n", CONFIG_SYS_FLASH_ERASE_TOUT); |
| |
| while ((in8(addr) & 0x80) != 0x80) { |
| if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { |
| printf ("Timeout\n"); |
| flash_reset (info->start[0]); |
| flash_to_mem(); |
| return 1; |
| } |
| /* show that we're waiting */ |
| if ((now - last) > 1000) { /* every second */ |
| putc ('.'); |
| last = now; |
| } |
| iobarrier_rw(); |
| } |
| |
| DONE: |
| /* reset to read mode */ |
| flash_reset (info->start[0]); |
| flash_to_mem(); |
| |
| printf (" done\n"); |
| return 0; |
| } |
| |
| /* |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) |
| { |
| ulong cp, wp, data; |
| int i, l, rc; |
| |
| flash_to_xd(); |
| |
| wp = (addr & ~3); /* get lower word aligned address */ |
| |
| /* |
| * handle unaligned start bytes |
| */ |
| if ((l = addr - wp) != 0) { |
| data = 0; |
| for (i=0, cp=wp; i<l; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| for (; i<4 && cnt>0; ++i) { |
| data = (data << 8) | *src++; |
| --cnt; |
| ++cp; |
| } |
| for (; cnt==0 && i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| if ((rc = write_word(info, wp, data)) != 0) { |
| flash_to_mem(); |
| return (rc); |
| } |
| wp += 4; |
| } |
| |
| /* |
| * handle word aligned part |
| */ |
| while (cnt >= 4) { |
| data = 0; |
| for (i=0; i<4; ++i) { |
| data = (data << 8) | *src++; |
| } |
| if ((rc = write_word(info, wp, data)) != 0) { |
| flash_to_mem(); |
| return (rc); |
| } |
| wp += 4; |
| cnt -= 4; |
| } |
| |
| if (cnt == 0) { |
| flash_to_mem(); |
| return (0); |
| } |
| |
| /* |
| * handle unaligned tail bytes |
| */ |
| data = 0; |
| for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { |
| data = (data << 8) | *src++; |
| --cnt; |
| } |
| for (; i<4; ++i, ++cp) { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| |
| flash_to_mem(); |
| return (write_word(info, wp, data)); |
| } |
| |
| /* |
| * Write a word to Flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| static int write_word (flash_info_t *info, ulong dest, ulong data) |
| { |
| volatile ulong addr = info->start[0]; |
| ulong start; |
| int i; |
| |
| flash_to_xd(); |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ((in32(dest) & data) != data) { |
| flash_to_mem(); |
| return (2); |
| } |
| |
| /* write each byte out */ |
| for (i = 0; i < 4; i++) { |
| char *data_ch = (char *)&data; |
| int flag = disable_interrupts(); |
| |
| out8(addr + 0x555, 0xAA); |
| iobarrier_rw(); |
| out8(addr + 0x2AA, 0x55); |
| iobarrier_rw(); |
| out8(addr + 0x555, 0xA0); |
| iobarrier_rw(); |
| out8(dest+i, data_ch[i]); |
| iobarrier_rw(); |
| |
| /* re-enable interrupts if necessary */ |
| if (flag) |
| enable_interrupts(); |
| |
| /* data polling for D7 */ |
| start = get_timer (0); |
| while ((in8(dest+i) & 0x80) != (data_ch[i] & 0x80)) { |
| if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { |
| flash_reset (addr); |
| flash_to_mem(); |
| return (1); |
| } |
| iobarrier_rw(); |
| } |
| } |
| |
| flash_reset (addr); |
| flash_to_mem(); |
| return (0); |
| } |
| |
| /* |
| * Reset bank to read mode |
| */ |
| static void flash_reset (ulong addr) |
| { |
| flash_to_xd(); |
| out8(addr, 0xF0); /* reset bank */ |
| iobarrier_rw(); |
| flash_to_mem(); |
| } |
| |
| void flash_print_info (flash_info_t *info) |
| { |
| int i; |
| |
| if (info->flash_id == FLASH_UNKNOWN) { |
| printf ("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch (info->flash_id & FLASH_VENDMASK) { |
| case FLASH_MAN_AMD: printf ("AMD "); break; |
| case FLASH_MAN_FUJ: printf ("FUJITSU "); break; |
| case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; |
| case FLASH_MAN_STM: printf ("SGS THOMSON "); break; |
| default: printf ("Unknown Vendor "); break; |
| } |
| |
| switch (info->flash_id & FLASH_TYPEMASK) { |
| case FLASH_AM040: printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n"); |
| break; |
| case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); |
| break; |
| case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); |
| break; |
| case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); |
| break; |
| default: printf ("Unknown Chip Type\n"); |
| break; |
| } |
| |
| if (info->size % 0x100000 == 0) { |
| printf (" Size: %ld MB in %d Sectors\n", |
| info->size / 0x100000, info->sector_count); |
| } else if (info->size % 0x400 == 0) { |
| printf (" Size: %ld KB in %d Sectors\n", |
| info->size / 0x400, info->sector_count); |
| } else { |
| printf (" Size: %ld B in %d Sectors\n", |
| info->size, info->sector_count); |
| } |
| |
| printf (" Sector Start Addresses:"); |
| for (i=0; i<info->sector_count; ++i) { |
| if ((i % 5) == 0) |
| printf ("\n "); |
| printf (" %08lX%s", |
| info->start[i], |
| info->protect[i] ? " (RO)" : " " |
| ); |
| } |
| printf ("\n"); |
| } |