blob: aeda4742aabef10bc7600bf0682500a1dcde7edc [file] [log] [blame]
/*
* Copyright (C) 2010-2017 CS Systemes d'Information
* Christophe Leroy <christophe.leroy@c-s.fr>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/* High Level Configuration Options */
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
#define CONFIG_EXTRA_ENV_SETTINGS \
"sdram_type=SDRAM\0" \
"flash_type=AM29LV160DB\0" \
"loadaddr=0x400000\0" \
"filename=uImage.lzma\0" \
"nfsroot=/opt/ofs\0" \
"dhcp_ip=ip=:::::eth0:dhcp\0" \
"console_args=console=ttyCPM0,115200N8\0" \
"flashboot=setenv bootargs " \
"${console_args} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
"mcr3k:eth0:off;" \
"${ofl_args}; " \
"bootm 0x04060000 - 0x04050000\0" \
"tftpboot=setenv bootargs " \
"${console_args} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
"mcr3k:eth0:off " \
"${ofl_args}; " \
"tftp ${loadaddr} ${filename};" \
"tftp 0xf00000 mcr3000.dtb;" \
"bootm ${loadaddr} - 0xf00000\0" \
"netboot=dhcp ${loadaddr} ${filename};" \
"tftp 0xf00000 mcr3000.dtb;" \
"setenv bootargs " \
"root=/dev/nfs rw " \
"${console_args} " \
"${dhcp_ip};" \
"bootm ${loadaddr} - 0xf00000\0" \
"nfsboot=setenv bootargs " \
"root=/dev/nfs rw nfsroot=${serverip}:${nfsroot} " \
"${console_args} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
"mcr3k:eth0:off;" \
"bootm 0x04060000 - 0x04050000\0" \
"dhcpboot=dhcp ${loadaddr} ${filename};" \
"tftp 0xf00000 mcr3000.dtb;" \
"setenv bootargs " \
"${console_args} " \
"${dhcp_ip} " \
"${ofl_args}; " \
"bootm ${loadaddr} - 0xf00000\0"
#define CONFIG_IPADDR 192.168.0.3
#define CONFIG_SERVERIP 192.168.0.1
#define CONFIG_NETMASK 255.0.0.0
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START 0x00002000
#define CONFIG_SYS_MEMTEST_END 0x00800000
#define CONFIG_SYS_LOAD_ADDR 0x200000
#define CONFIG_SYS_HZ 1000
/* Definitions for initial stack pointer and data area (in DPRAM) */
#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_IMMR + 0x2800)
#define CONFIG_SYS_INIT_RAM_SIZE (0x2e00 - 0x2800)
/* RAM configuration (note that CONFIG_SYS_SDRAM_BASE must be zero) */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
/* FLASH organization */
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_FLASH_CFI 1
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_MAX_FLASH_SECT 35
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
/*
* For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization.
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
#define CONFIG_SYS_MONITOR_LEN (320 << 10)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN (4096 << 10)
/* Environment Configuration */
/* environment is in FLASH */
#define CONFIG_ENV_SECT_SIZE 0x2000
#define CONFIG_ENV_OFFSET 0x4000
#define CONFIG_ENV_OVERWRITE 1
/* Ethernet configuration part */
#define CONFIG_SYS_DISCOVER_PHY 1
#define CONFIG_MII_INIT 1
/* NAND configuration part */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_MAX_CHIPS 1
#define CONFIG_SYS_NAND_BASE 0x0C000000
#endif /* __CONFIG_H */