include/configs/s5pc210_universal.h - platform/external/u-boot - Gitiles

 /*
  * Copyright (C) 2010 Samsung Electronics
  * Minkyu Kang <mk7.kang@samsung.com>
  *
  * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __CONFIG_UNIVERSAL_H
 #define __CONFIG_UNIVERSAL_H

 #include <configs/exynos4-common.h>

 #define CONFIG_SYS_PROMPT	"Universal # "	/* Monitor Command Prompt */


 #define CONFIG_TIZEN			/* TIZEN lib */

 /* Keep L2 Cache Disabled */
 #define CONFIG_SYS_L2CACHE_OFF		1

 /* Universal has 2 banks of DRAM */
 #define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE

 #define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */

 /* select serial console configuration */
 #define CONFIG_SERIAL2
 #define CONFIG_BAUDRATE			115200

 /* Console configuration */
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV

 #define CONFIG_BOOTARGS			"Please use defined boot"
 #define CONFIG_BOOTCOMMAND		"run mmcboot"
 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC1,115200n8\0"

 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
 					- GENERATED_GBL_DATA_SIZE)

 #define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* ram console */

 #define CONFIG_SYS_MONITOR_BASE	0x00000000

 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5000000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x4800000)

 #define CONFIG_SYS_TEXT_BASE		0x44800000

 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS

 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
 #define MTDIDS_DEFAULT		"onenand0=samsung-onenand"

 #define MTDPARTS_DEFAULT	"mtdparts=samsung-onenand:"\
 				"128k(s-boot)"\
 				",896k(bootloader)"\
 				",256k(params)"\
 				",2816k(config)"\
 				",8m(csa)"\
 				",7m(kernel)"\
 				",1m(log)"\
 				",12m(modem)"\
 				",60m(qboot)"\
 				",-(UBI)\0"

 #define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT

 #define MBRPARTS_DEFAULT	"20M(permanent)"\
 				",20M(boot)"\
 				",1G(system)"\
 				",100M(swap)"\
 				",-(UMS)\0"

 #define CONFIG_ENV_UBI_MTD	" ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
 #define CONFIG_BOOTBLOCK	"10"
 #define CONFIG_UBIBLOCK		"9"

 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
 #define CONFIG_ENV_SIZE			4096
 #define CONFIG_ENV_OFFSET		((32 - 4) << 10) /* 32KiB - 4KiB */

 #define CONFIG_ENV_UBIFS_OPTION	" rootflags=bulk_read,no_chk_data_crc "
 #define CONFIG_ENV_FLASHBOOT	CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
 				"${mtdparts}"

 #define CONFIG_ENV_COMMON_BOOT	"${console} ${meminfo}"

 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"updateb=" \
 		"onenand erase 0x0 0x100000;" \
 		"onenand write 0x42008000 0x0 0x100000\0" \
 	"updatek=" \
 		"onenand erase 0xc00000 0x500000;" \
 		"onenand write 0x41008000 0xc00000 0x500000\0" \
 	"bootk=" \
 		"run loaduimage; bootm 0x40007FC0\0" \
 	"updatebackup=" \
 		"mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
 		"mmc dev 0 0\0" \
 	"updatebootb=" \
 		"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
 	"lpj=lpj=3981312\0" \
 	"ubifsboot=" \
 		"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
 		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
 		CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
 	"tftpboot=" \
 		"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
 		CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
 		CONFIG_ENV_COMMON_BOOT \
 		"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
 	"nfsboot=" \
 		"set bootargs root=/dev/nfs rw " \
 		"nfsroot=${nfsroot},nolock,tcp " \
 		"ip=${ipaddr}:${serverip}:${gatewayip}:" \
 		"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
 		"; run bootk\0" \
 	"ramfsboot=" \
 		"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
 		"${console} ${meminfo} " \
 		"initrd=0x43000000,8M ramdisk=8192\0" \
 	"mmcboot=" \
 		"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 		"run loaduimage; bootm 0x40007FC0\0" \
 	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
 	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
 	"verify=n\0" \
 	"rootfstype=ext4\0" \
 	"console=" CONFIG_DEFAULT_CONSOLE \
 	"mtdparts=" MTDPARTS_DEFAULT \
 	"mbrparts=" MBRPARTS_DEFAULT \
 	"meminfo=crashkernel=32M@0x50000000\0" \
 	"nfsroot=/nfsroot/arm\0" \
 	"bootblock=" CONFIG_BOOTBLOCK "\0" \
 	"ubiblock=" CONFIG_UBIBLOCK" \0" \
 	"ubi=enabled\0" \
 	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
 	"mmcdev=0\0" \
 	"mmcbootpart=2\0" \
 	"mmcrootpart=3\0" \
 	"opts=always_resume=1"

 #define CONFIG_USE_ONENAND_BOARD_INIT
 #define CONFIG_SAMSUNG_ONENAND
 #define CONFIG_SYS_ONENAND_BASE		0x0C000000

 #include <asm/arch/gpio.h>
 /*
  * I2C Settings
  */
 #define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
 #define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6

 #define CONFIG_CMD_I2C

 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_SOFT		/* I2C bit-banged */
 #define CONFIG_SYS_I2C_SOFT_SPEED	50000
 #define CONFIG_SYS_I2C_SOFT_SLAVE	0
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 #define CONFIG_I2C_MULTI_BUS
 #define CONFIG_SYS_MAX_I2C_BUS	7

 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_MAX8998

 #define CONFIG_USB_GADGET
 #define CONFIG_USB_GADGET_S3C_UDC_OTG
 #define CONFIG_USB_GADGET_DUALSPEED

 /*
  * SPI Settings
  */
 #define CONFIG_SOFT_SPI

 #ifndef	__ASSEMBLY__
 void universal_spi_scl(int bit);
 void universal_spi_sda(int bit);
 int universal_spi_read(void);
 #endif

 /* Common misc for Samsung */
 #define CONFIG_MISC_COMMON

 #define CONFIG_MISC_INIT_R

 /* Download menu - Samsung common */
 #define CONFIG_LCD_MENU
 #define CONFIG_LCD_MENU_BOARD

 /* Download menu - definitions for check keys */
 #ifndef __ASSEMBLY__
 #include <power/max8998_pmic.h>

 #define KEY_PWR_PMIC_NAME		"MAX8998_PMIC"
 #define KEY_PWR_STATUS_REG		MAX8998_REG_STATUS1
 #define KEY_PWR_STATUS_MASK		(1 << 7)
 #define KEY_PWR_INTERRUPT_REG		MAX8998_REG_IRQ1
 #define KEY_PWR_INTERRUPT_MASK		(1 << 7)

 #define KEY_VOL_UP_GPIO			EXYNOS4_GPIO_X20
 #define KEY_VOL_DOWN_GPIO		EXYNOS4_GPIO_X21
 #endif /* __ASSEMBLY__ */

 /* LCD console */
 #define LCD_BPP			LCD_COLOR16
 #define CONFIG_SYS_WHITE_ON_BLACK

 /*
  * LCD Settings
  */
 #define CONFIG_EXYNOS_FB
 #define CONFIG_LCD
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_LD9040
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)

 #endif	/* __CONFIG_H */
	/*
	* Copyright (C) 2010 Samsung Electronics
	* Minkyu Kang <mk7.kang@samsung.com>
	*
	* Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_UNIVERSAL_H
	#define __CONFIG_UNIVERSAL_H

	#include <configs/exynos4-common.h>

	#define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */


	#define CONFIG_TIZEN /* TIZEN lib */

	/* Keep L2 Cache Disabled */
	#define CONFIG_SYS_L2CACHE_OFF 1

	/* Universal has 2 banks of DRAM */
	#define CONFIG_NR_DRAM_BANKS 2
	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE

	#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */

	/* select serial console configuration */
	#define CONFIG_SERIAL2
	#define CONFIG_BAUDRATE 115200

	/* Console configuration */
	#define CONFIG_SYS_CONSOLE_INFO_QUIET
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV

	#define CONFIG_BOOTARGS "Please use defined boot"
	#define CONFIG_BOOTCOMMAND "run mmcboot"
	#define CONFIG_DEFAULT_CONSOLE "console=ttySAC1,115200n8\0"

	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
	- GENERATED_GBL_DATA_SIZE)

	#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */

	#define CONFIG_SYS_MONITOR_BASE 0x00000000

	/* memtest works on */
	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5000000)
	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)

	#define CONFIG_SYS_TEXT_BASE 0x44800000

	#define CONFIG_MTD_DEVICE
	#define CONFIG_MTD_PARTITIONS

	/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
	#define MTDIDS_DEFAULT "onenand0=samsung-onenand"

	#define MTDPARTS_DEFAULT "mtdparts=samsung-onenand:"\
	"128k(s-boot)"\
	",896k(bootloader)"\
	",256k(params)"\
	",2816k(config)"\
	",8m(csa)"\
	",7m(kernel)"\
	",1m(log)"\
	",12m(modem)"\
	",60m(qboot)"\
	",-(UBI)\0"

	#define NORMAL_MTDPARTS_DEFAULT MTDPARTS_DEFAULT

	#define MBRPARTS_DEFAULT "20M(permanent)"\
	",20M(boot)"\
	",1G(system)"\
	",100M(swap)"\
	",-(UMS)\0"

	#define CONFIG_ENV_UBI_MTD " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
	#define CONFIG_BOOTBLOCK "10"
	#define CONFIG_UBIBLOCK "9"

	#define CONFIG_ENV_IS_IN_MMC
	#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
	#define CONFIG_ENV_SIZE 4096
	#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */

	#define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
	#define CONFIG_ENV_FLASHBOOT CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
	"${mtdparts}"

	#define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}"

	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"updateb=" \
	"onenand erase 0x0 0x100000;" \
	"onenand write 0x42008000 0x0 0x100000\0" \
	"updatek=" \
	"onenand erase 0xc00000 0x500000;" \
	"onenand write 0x41008000 0xc00000 0x500000\0" \
	"bootk=" \
	"run loaduimage; bootm 0x40007FC0\0" \
	"updatebackup=" \
	"mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
	"mmc dev 0 0\0" \
	"updatebootb=" \
	"mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
	"lpj=lpj=3981312\0" \
	"ubifsboot=" \
	"set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
	CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
	CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
	"tftpboot=" \
	"set bootargs root=ubi0!rootfs rootfstype=ubifs " \
	CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
	CONFIG_ENV_COMMON_BOOT \
	"; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
	"nfsboot=" \
	"set bootargs root=/dev/nfs rw " \
	"nfsroot=${nfsroot},nolock,tcp " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	"${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
	"; run bootk\0" \
	"ramfsboot=" \
	"set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
	"${console} ${meminfo} " \
	"initrd=0x43000000,8M ramdisk=8192\0" \
	"mmcboot=" \
	"set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
	"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
	"run loaduimage; bootm 0x40007FC0\0" \
	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
	"mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
	"verify=n\0" \
	"rootfstype=ext4\0" \
	"console=" CONFIG_DEFAULT_CONSOLE \
	"mtdparts=" MTDPARTS_DEFAULT \
	"mbrparts=" MBRPARTS_DEFAULT \
	"meminfo=crashkernel=32M@0x50000000\0" \
	"nfsroot=/nfsroot/arm\0" \
	"bootblock=" CONFIG_BOOTBLOCK "\0" \
	"ubiblock=" CONFIG_UBIBLOCK" \0" \
	"ubi=enabled\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
	"mmcdev=0\0" \
	"mmcbootpart=2\0" \
	"mmcrootpart=3\0" \
	"opts=always_resume=1"

	#define CONFIG_USE_ONENAND_BOARD_INIT
	#define CONFIG_SAMSUNG_ONENAND
	#define CONFIG_SYS_ONENAND_BASE 0x0C000000

	#include <asm/arch/gpio.h>
	/*
	* I2C Settings
	*/
	#define CONFIG_SOFT_I2C_GPIO_SCL EXYNOS4_GPIO_B7
	#define CONFIG_SOFT_I2C_GPIO_SDA EXYNOS4_GPIO_B6

	#define CONFIG_CMD_I2C

	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
	#define CONFIG_SYS_I2C_SOFT_SPEED 50000
	#define CONFIG_SYS_I2C_SOFT_SLAVE 0
	#define CONFIG_SOFT_I2C_READ_REPEATED_START
	#define CONFIG_I2C_MULTI_BUS
	#define CONFIG_SYS_MAX_I2C_BUS 7

	#define CONFIG_POWER
	#define CONFIG_POWER_I2C
	#define CONFIG_POWER_MAX8998

	#define CONFIG_USB_GADGET
	#define CONFIG_USB_GADGET_S3C_UDC_OTG
	#define CONFIG_USB_GADGET_DUALSPEED

	/*
	* SPI Settings
	*/
	#define CONFIG_SOFT_SPI

	#ifndef __ASSEMBLY__
	void universal_spi_scl(int bit);
	void universal_spi_sda(int bit);
	int universal_spi_read(void);
	#endif

	/* Common misc for Samsung */
	#define CONFIG_MISC_COMMON

	#define CONFIG_MISC_INIT_R

	/* Download menu - Samsung common */
	#define CONFIG_LCD_MENU
	#define CONFIG_LCD_MENU_BOARD

	/* Download menu - definitions for check keys */
	#ifndef __ASSEMBLY__
	#include <power/max8998_pmic.h>

	#define KEY_PWR_PMIC_NAME "MAX8998_PMIC"
	#define KEY_PWR_STATUS_REG MAX8998_REG_STATUS1
	#define KEY_PWR_STATUS_MASK (1 << 7)
	#define KEY_PWR_INTERRUPT_REG MAX8998_REG_IRQ1
	#define KEY_PWR_INTERRUPT_MASK (1 << 7)

	#define KEY_VOL_UP_GPIO EXYNOS4_GPIO_X20
	#define KEY_VOL_DOWN_GPIO EXYNOS4_GPIO_X21
	#endif /* __ASSEMBLY__ */

	/* LCD console */
	#define LCD_BPP LCD_COLOR16
	#define CONFIG_SYS_WHITE_ON_BLACK

	/*
	* LCD Settings
	*/
	#define CONFIG_EXYNOS_FB
	#define CONFIG_LCD
	#define CONFIG_CMD_BMP
	#define CONFIG_BMP_16BPP
	#define CONFIG_LD9040
	#define CONFIG_VIDEO_BMP_GZIP
	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)

	#endif /* __CONFIG_H */