blob: 48aaaa626848d79b31d2ba3567bc6df794dd38f0 [file] [log] [blame]
/*
* Freescale i.MX28 I2C Driver
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* Partly based on Linux kernel i2c-mxs.c driver:
* Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
*
* Which was based on a (non-working) driver which was:
* Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <common.h>
#include <malloc.h>
#include <asm/errno.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#define MXS_I2C_MAX_TIMEOUT 1000000
void mxs_i2c_reset(void)
{
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
int ret;
ret = mx28_reset_block(&i2c_regs->hw_i2c_ctrl0_reg);
if (ret) {
debug("MXS I2C: Block reset timeout\n");
return;
}
writel(I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | I2C_CTRL1_NO_SLAVE_ACK_IRQ |
I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ,
&i2c_regs->hw_i2c_ctrl1_clr);
writel(I2C_QUEUECTRL_PIO_QUEUE_MODE, &i2c_regs->hw_i2c_queuectrl_set);
}
void mxs_i2c_setup_read(uint8_t chip, int len)
{
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
writel(I2C_QUEUECMD_RETAIN_CLOCK | I2C_QUEUECMD_PRE_SEND_START |
I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION |
(1 << I2C_QUEUECMD_XFER_COUNT_OFFSET),
&i2c_regs->hw_i2c_queuecmd);
writel((chip << 1) | 1, &i2c_regs->hw_i2c_data);
writel(I2C_QUEUECMD_SEND_NAK_ON_LAST | I2C_QUEUECMD_MASTER_MODE |
(len << I2C_QUEUECMD_XFER_COUNT_OFFSET) |
I2C_QUEUECMD_POST_SEND_STOP, &i2c_regs->hw_i2c_queuecmd);
writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set);
}
void mxs_i2c_write(uchar chip, uint addr, int alen,
uchar *buf, int blen, int stop)
{
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
uint32_t data;
int i, remain, off;
if ((alen > 4) || (alen == 0)) {
debug("MXS I2C: Invalid address length\n");
return;
}
if (stop)
stop = I2C_QUEUECMD_POST_SEND_STOP;
writel(I2C_QUEUECMD_PRE_SEND_START |
I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION |
((blen + alen + 1) << I2C_QUEUECMD_XFER_COUNT_OFFSET) | stop,
&i2c_regs->hw_i2c_queuecmd);
data = (chip << 1) << 24;
for (i = 0; i < alen; i++) {
data >>= 8;
data |= ((char *)&addr)[alen - i - 1] << 24;
if ((i & 3) == 2)
writel(data, &i2c_regs->hw_i2c_data);
}
off = i;
for (; i < off + blen; i++) {
data >>= 8;
data |= buf[i - off] << 24;
if ((i & 3) == 2)
writel(data, &i2c_regs->hw_i2c_data);
}
remain = 24 - ((i & 3) * 8);
if (remain)
writel(data >> remain, &i2c_regs->hw_i2c_data);
writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set);
}
int mxs_i2c_wait_for_ack(void)
{
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
uint32_t tmp;
int timeout = MXS_I2C_MAX_TIMEOUT;
for (;;) {
tmp = readl(&i2c_regs->hw_i2c_ctrl1);
if (tmp & I2C_CTRL1_NO_SLAVE_ACK_IRQ) {
debug("MXS I2C: No slave ACK\n");
goto err;
}
if (tmp & (
I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ)) {
debug("MXS I2C: Error (CTRL1 = %08x)\n", tmp);
goto err;
}
if (tmp & I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ)
break;
if (!timeout--) {
debug("MXS I2C: Operation timed out\n");
goto err;
}
udelay(1);
}
return 0;
err:
mxs_i2c_reset();
return 1;
}
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
uint32_t tmp = 0;
int ret;
int i;
mxs_i2c_write(chip, addr, alen, NULL, 0, 0);
ret = mxs_i2c_wait_for_ack();
if (ret) {
debug("MXS I2C: Failed writing address\n");
return ret;
}
mxs_i2c_setup_read(chip, len);
ret = mxs_i2c_wait_for_ack();
if (ret) {
debug("MXS I2C: Failed reading address\n");
return ret;
}
for (i = 0; i < len; i++) {
if (!(i & 3)) {
while (readl(&i2c_regs->hw_i2c_queuestat) &
I2C_QUEUESTAT_RD_QUEUE_EMPTY)
;
tmp = readl(&i2c_regs->hw_i2c_queuedata);
}
buffer[i] = tmp & 0xff;
tmp >>= 8;
}
return 0;
}
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
int ret;
mxs_i2c_write(chip, addr, alen, buffer, len, 1);
ret = mxs_i2c_wait_for_ack();
if (ret)
debug("MXS I2C: Failed writing address\n");
return ret;
}
int i2c_probe(uchar chip)
{
int ret;
mxs_i2c_write(chip, 0, 1, NULL, 0, 1);
ret = mxs_i2c_wait_for_ack();
mxs_i2c_reset();
return ret;
}
void i2c_init(int speed, int slaveadd)
{
struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
mxs_i2c_reset();
switch (speed) {
case 100000:
writel((0x0078 << I2C_TIMING0_HIGH_COUNT_OFFSET) |
(0x0030 << I2C_TIMING0_RCV_COUNT_OFFSET),
&i2c_regs->hw_i2c_timing0);
writel((0x0080 << I2C_TIMING1_LOW_COUNT_OFFSET) |
(0x0030 << I2C_TIMING1_XMIT_COUNT_OFFSET),
&i2c_regs->hw_i2c_timing1);
break;
case 400000:
writel((0x000f << I2C_TIMING0_HIGH_COUNT_OFFSET) |
(0x0007 << I2C_TIMING0_RCV_COUNT_OFFSET),
&i2c_regs->hw_i2c_timing0);
writel((0x001f << I2C_TIMING1_LOW_COUNT_OFFSET) |
(0x000f << I2C_TIMING1_XMIT_COUNT_OFFSET),
&i2c_regs->hw_i2c_timing1);
break;
default:
printf("MXS I2C: Invalid speed selected (%d Hz)\n", speed);
return;
}
writel((0x0015 << I2C_TIMING2_BUS_FREE_OFFSET) |
(0x000d << I2C_TIMING2_LEADIN_COUNT_OFFSET),
&i2c_regs->hw_i2c_timing2);
return;
}