blob: 60c1aa90b6b97d6f133b62a3e7820df47ff8af03 [file] [log] [blame]
/*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Marius Groeger <mgroeger@sysgo.de>
*
* (C) Copyright 2002
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
* Alex Zuepke <azu@sysgo.de>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/*
* CPU specific code
*/
#include <common.h>
#include <command.h>
#include <clps7111.h>
#include <asm/hardware.h>
int cpu_init (void)
{
/*
* setup up stacks if necessary
*/
#ifdef CONFIG_USE_IRQ
IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
#endif
return 0;
}
int cleanup_before_linux (void)
{
/*
* this function is called just before we call linux
* it prepares the processor for linux
*
* we turn off caches etc ...
* and we set the CPU-speed to 73 MHz - see start.S for details
*/
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO)
unsigned long i;
disable_interrupts ();
/* turn off I-cache */
asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
i &= ~0x1000;
asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
/* flush I-cache */
asm ("mcr p15, 0, %0, c7, c5, 0": :"r" (i));
#ifdef CONFIG_ARM7_REVD
/* go to high speed */
IO_SYSCON3 = (IO_SYSCON3 & ~CLKCTL) | CLKCTL_73;
#endif
#elif defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292)
disable_interrupts ();
/* Nothing more needed */
#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
/* No cleanup before linux for IntegratorAP/CM720T as yet */
#else
#error No cleanup_before_linux() defined for this CPU type
#endif
return 0;
}
int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
disable_interrupts ();
reset_cpu (0);
/*NOTREACHED*/
return (0);
}
/*
* Instruction and Data cache enable and disable functions
*
*/
#if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_NETARM) || defined(CONFIG_ARMADILLO)
/* read co-processor 15, register #1 (control register) */
static unsigned long read_p15_c1(void)
{
unsigned long value;
__asm__ __volatile__(
"mrc p15, 0, %0, c1, c0, 0 @ read control reg\n"
: "=r" (value)
:
: "memory");
/* printf("p15/c1 is = %08lx\n", value); */
return value;
}
/* write to co-processor 15, register #1 (control register) */
static void write_p15_c1(unsigned long value)
{
/* printf("write %08lx to p15/c1\n", value); */
__asm__ __volatile__(
"mcr p15, 0, %0, c1, c0, 0 @ write it back\n"
:
: "r" (value)
: "memory");
read_p15_c1();
}
static void cp_delay (void)
{
volatile int i;
/* copro seems to need some delay between reading and writing */
for (i = 0; i < 100; i++);
}
/* See also ARM Ref. Man. */
#define C1_MMU (1<<0) /* mmu off/on */
#define C1_ALIGN (1<<1) /* alignment faults off/on */
#define C1_IDC (1<<2) /* icache and/or dcache off/on */
#define C1_WRITE_BUFFER (1<<3) /* write buffer off/on */
#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
#define C1_SYS_PROT (1<<8) /* system protection */
#define C1_ROM_PROT (1<<9) /* ROM protection */
#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
void icache_enable (void)
{
ulong reg;
reg = read_p15_c1 ();
cp_delay ();
write_p15_c1 (reg | C1_IDC);
}
void icache_disable (void)
{
ulong reg;
reg = read_p15_c1 ();
cp_delay ();
write_p15_c1 (reg & ~C1_IDC);
}
int icache_status (void)
{
return (read_p15_c1 () & C1_IDC) != 0;
}
void dcache_enable (void)
{
ulong reg;
reg = read_p15_c1 ();
cp_delay ();
write_p15_c1 (reg | C1_IDC);
}
void dcache_disable (void)
{
ulong reg;
reg = read_p15_c1 ();
cp_delay ();
write_p15_c1 (reg & ~C1_IDC);
}
int dcache_status (void)
{
return (read_p15_c1 () & C1_IDC) != 0;
}
#elif defined(CONFIG_S3C4510B)
void icache_enable (void)
{
s32 i;
/* disable all cache bits */
CLR_REG( REG_SYSCFG, 0x3F);
/* 8KB cache, write enable */
SET_REG( REG_SYSCFG, CACHE_WRITE_BUFF | CACHE_MODE_01);
/* clear TAG RAM bits */
for ( i = 0; i < 256; i++)
PUT_REG( CACHE_TAG_RAM + 4*i, 0x00000000);
/* clear SET0 RAM */
for(i=0; i < 1024; i++)
PUT_REG( CACHE_SET0_RAM + 4*i, 0x00000000);
/* clear SET1 RAM */
for(i=0; i < 1024; i++)
PUT_REG( CACHE_SET1_RAM + 4*i, 0x00000000);
/* enable cache */
SET_REG( REG_SYSCFG, CACHE_ENABLE);
}
void icache_disable (void)
{
/* disable all cache bits */
CLR_REG( REG_SYSCFG, 0x3F);
}
int icache_status (void)
{
return GET_REG( REG_SYSCFG) & CACHE_ENABLE;
}
void dcache_enable (void)
{
/* we don't have seperate instruction/data caches */
icache_enable();
}
void dcache_disable (void)
{
/* we don't have seperate instruction/data caches */
icache_disable();
}
int dcache_status (void)
{
/* we don't have seperate instruction/data caches */
return icache_status();
}
#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
/* No specific cache setup for IntegratorAP/CM720T as yet */
void icache_enable (void)
{
}
#elif defined(CONFIG_LPC2292) /* just to satisfy the compiler */
#else
#error No icache/dcache enable/disable functions defined for this CPU type
#endif