| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright(C) 2019 |
| * Author(s): Giulio Benetti <giulio.benetti@benettiengineering.com> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <clk-uclass.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/imx-regs.h> |
| #include <dt-bindings/clock/imxrt1050-clock.h> |
| |
| #include "clk.h" |
| |
| static ulong imxrt1050_clk_get_rate(struct clk *clk) |
| { |
| struct clk *c; |
| int ret; |
| |
| debug("%s(#%lu)\n", __func__, clk->id); |
| |
| ret = clk_get_by_id(clk->id, &c); |
| if (ret) |
| return ret; |
| |
| return clk_get_rate(c); |
| } |
| |
| static ulong imxrt1050_clk_set_rate(struct clk *clk, ulong rate) |
| { |
| struct clk *c; |
| int ret; |
| |
| debug("%s(#%lu), rate: %lu\n", __func__, clk->id, rate); |
| |
| ret = clk_get_by_id(clk->id, &c); |
| if (ret) |
| return ret; |
| |
| return clk_set_rate(c, rate); |
| } |
| |
| static int __imxrt1050_clk_enable(struct clk *clk, bool enable) |
| { |
| struct clk *c; |
| int ret; |
| |
| debug("%s(#%lu) en: %d\n", __func__, clk->id, enable); |
| |
| ret = clk_get_by_id(clk->id, &c); |
| if (ret) |
| return ret; |
| |
| if (enable) |
| ret = clk_enable(c); |
| else |
| ret = clk_disable(c); |
| |
| return ret; |
| } |
| |
| static int imxrt1050_clk_disable(struct clk *clk) |
| { |
| return __imxrt1050_clk_enable(clk, 0); |
| } |
| |
| static int imxrt1050_clk_enable(struct clk *clk) |
| { |
| return __imxrt1050_clk_enable(clk, 1); |
| } |
| |
| static int imxrt1050_clk_set_parent(struct clk *clk, struct clk *parent) |
| { |
| struct clk *c, *cp; |
| int ret; |
| |
| debug("%s(#%lu), parent: %lu\n", __func__, clk->id, parent->id); |
| |
| ret = clk_get_by_id(clk->id, &c); |
| if (ret) |
| return ret; |
| |
| ret = clk_get_by_id(parent->id, &cp); |
| if (ret) |
| return ret; |
| |
| return clk_set_parent(c, cp); |
| } |
| |
| static struct clk_ops imxrt1050_clk_ops = { |
| .set_rate = imxrt1050_clk_set_rate, |
| .get_rate = imxrt1050_clk_get_rate, |
| .enable = imxrt1050_clk_enable, |
| .disable = imxrt1050_clk_disable, |
| .set_parent = imxrt1050_clk_set_parent, |
| }; |
| |
| static const char * const pll_ref_sels[] = {"osc", "dummy", }; |
| static const char * const pll1_bypass_sels[] = {"pll1_arm", "pll1_arm_ref_sel", }; |
| static const char * const pll2_bypass_sels[] = {"pll2_sys", "pll2_sys_ref_sel", }; |
| static const char * const pll3_bypass_sels[] = {"pll3_usb_otg", "pll3_usb_otg_ref_sel", }; |
| static const char * const pll5_bypass_sels[] = {"pll5_video", "pll5_video_ref_sel", }; |
| |
| static const char *const pre_periph_sels[] = { "pll2_sys", "pll2_pfd2_396m", "pll2_pfd0_352m", "arm_podf", }; |
| static const char *const periph_sels[] = { "pre_periph_sel", "todo", }; |
| static const char *const usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", }; |
| static const char *const lpuart_sels[] = { "pll3_80m", "osc", }; |
| static const char *const semc_alt_sels[] = { "pll2_pfd2_396m", "pll3_pfd1_664_62m", }; |
| static const char *const semc_sels[] = { "periph_sel", "semc_alt_sel", }; |
| static const char *const lcdif_sels[] = { "pll2_sys", "pll3_pfd3_454_74m", "pll5_video", "pll2_pfd0_352m", "pll2_pfd1_594m", "pll3_pfd1_664_62m"}; |
| |
| static int imxrt1050_clk_probe(struct udevice *dev) |
| { |
| void *base; |
| |
| /* Anatop clocks */ |
| base = (void *)ANATOP_BASE_ADDR; |
| |
| clk_dm(IMXRT1050_CLK_PLL1_REF_SEL, |
| imx_clk_mux("pll1_arm_ref_sel", base + 0x0, 14, 2, |
| pll_ref_sels, ARRAY_SIZE(pll_ref_sels))); |
| clk_dm(IMXRT1050_CLK_PLL2_REF_SEL, |
| imx_clk_mux("pll2_sys_ref_sel", base + 0x30, 14, 2, |
| pll_ref_sels, ARRAY_SIZE(pll_ref_sels))); |
| clk_dm(IMXRT1050_CLK_PLL3_REF_SEL, |
| imx_clk_mux("pll3_usb_otg_ref_sel", base + 0x10, 14, 2, |
| pll_ref_sels, ARRAY_SIZE(pll_ref_sels))); |
| clk_dm(IMXRT1050_CLK_PLL5_REF_SEL, |
| imx_clk_mux("pll5_video_ref_sel", base + 0xa0, 14, 2, |
| pll_ref_sels, ARRAY_SIZE(pll_ref_sels))); |
| |
| clk_dm(IMXRT1050_CLK_PLL1_ARM, |
| imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_arm", "pll1_arm_ref_sel", |
| base + 0x0, 0x7f)); |
| clk_dm(IMXRT1050_CLK_PLL2_SYS, |
| imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_sys", "pll2_sys_ref_sel", |
| base + 0x30, 0x1)); |
| clk_dm(IMXRT1050_CLK_PLL3_USB_OTG, |
| imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", |
| "pll3_usb_otg_ref_sel", |
| base + 0x10, 0x1)); |
| clk_dm(IMXRT1050_CLK_PLL5_VIDEO, |
| imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "pll5_video_ref_sel", |
| base + 0xa0, 0x7f)); |
| |
| /* PLL bypass out */ |
| clk_dm(IMXRT1050_CLK_PLL1_BYPASS, |
| imx_clk_mux_flags("pll1_bypass", base + 0x0, 16, 1, |
| pll1_bypass_sels, |
| ARRAY_SIZE(pll1_bypass_sels), |
| CLK_SET_RATE_PARENT)); |
| clk_dm(IMXRT1050_CLK_PLL2_BYPASS, |
| imx_clk_mux_flags("pll2_bypass", base + 0x30, 16, 1, |
| pll2_bypass_sels, |
| ARRAY_SIZE(pll2_bypass_sels), |
| CLK_SET_RATE_PARENT)); |
| clk_dm(IMXRT1050_CLK_PLL3_BYPASS, |
| imx_clk_mux_flags("pll3_bypass", base + 0x10, 16, 1, |
| pll3_bypass_sels, |
| ARRAY_SIZE(pll3_bypass_sels), |
| CLK_SET_RATE_PARENT)); |
| clk_dm(IMXRT1050_CLK_PLL5_BYPASS, |
| imx_clk_mux_flags("pll5_bypass", base + 0xa0, 16, 1, |
| pll5_bypass_sels, |
| ARRAY_SIZE(pll5_bypass_sels), |
| CLK_SET_RATE_PARENT)); |
| |
| clk_dm(IMXRT1050_CLK_VIDEO_POST_DIV_SEL, |
| imx_clk_divider("video_post_div_sel", "pll5_video", |
| base + 0xa0, 19, 2)); |
| clk_dm(IMXRT1050_CLK_VIDEO_DIV, |
| imx_clk_divider("video_div", "video_post_div_sel", |
| base + 0x170, 30, 2)); |
| |
| clk_dm(IMXRT1050_CLK_PLL3_80M, |
| imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6)); |
| |
| clk_dm(IMXRT1050_CLK_PLL2_PFD0_352M, |
| imx_clk_pfd("pll2_pfd0_352m", "pll2_sys", base + 0x100, 0)); |
| clk_dm(IMXRT1050_CLK_PLL2_PFD1_594M, |
| imx_clk_pfd("pll2_pfd1_594m", "pll2_sys", base + 0x100, 1)); |
| clk_dm(IMXRT1050_CLK_PLL2_PFD2_396M, |
| imx_clk_pfd("pll2_pfd2_396m", "pll2_sys", base + 0x100, 2)); |
| clk_dm(IMXRT1050_CLK_PLL3_PFD1_664_62M, |
| imx_clk_pfd("pll3_pfd1_664_62m", "pll3_usb_otg", base + 0xf0, |
| 1)); |
| clk_dm(IMXRT1050_CLK_PLL3_PFD3_454_74M, |
| imx_clk_pfd("pll3_pfd3_454_74m", "pll3_usb_otg", base + 0xf0, |
| 3)); |
| |
| /* CCM clocks */ |
| base = dev_read_addr_ptr(dev); |
| if (base == (void *)FDT_ADDR_T_NONE) |
| return -EINVAL; |
| |
| clk_dm(IMXRT1050_CLK_ARM_PODF, |
| imx_clk_divider("arm_podf", "pll1_arm", |
| base + 0x10, 0, 3)); |
| |
| clk_dm(IMXRT1050_CLK_PRE_PERIPH_SEL, |
| imx_clk_mux("pre_periph_sel", base + 0x18, 18, 2, |
| pre_periph_sels, ARRAY_SIZE(pre_periph_sels))); |
| clk_dm(IMXRT1050_CLK_PERIPH_SEL, |
| imx_clk_mux("periph_sel", base + 0x14, 25, 1, |
| periph_sels, ARRAY_SIZE(periph_sels))); |
| clk_dm(IMXRT1050_CLK_USDHC1_SEL, |
| imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, |
| usdhc_sels, ARRAY_SIZE(usdhc_sels))); |
| clk_dm(IMXRT1050_CLK_USDHC2_SEL, |
| imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, |
| usdhc_sels, ARRAY_SIZE(usdhc_sels))); |
| clk_dm(IMXRT1050_CLK_LPUART_SEL, |
| imx_clk_mux("lpuart_sel", base + 0x24, 6, 1, |
| lpuart_sels, ARRAY_SIZE(lpuart_sels))); |
| clk_dm(IMXRT1050_CLK_SEMC_ALT_SEL, |
| imx_clk_mux("semc_alt_sel", base + 0x14, 7, 1, |
| semc_alt_sels, ARRAY_SIZE(semc_alt_sels))); |
| clk_dm(IMXRT1050_CLK_SEMC_SEL, |
| imx_clk_mux("semc_sel", base + 0x14, 6, 1, |
| semc_sels, ARRAY_SIZE(semc_sels))); |
| clk_dm(IMXRT1050_CLK_LCDIF_SEL, |
| imx_clk_mux("lcdif_sel", base + 0x38, 15, 3, |
| lcdif_sels, ARRAY_SIZE(lcdif_sels))); |
| |
| clk_dm(IMXRT1050_CLK_AHB_PODF, |
| imx_clk_divider("ahb_podf", "periph_sel", |
| base + 0x14, 10, 3)); |
| clk_dm(IMXRT1050_CLK_USDHC1_PODF, |
| imx_clk_divider("usdhc1_podf", "usdhc1_sel", |
| base + 0x24, 11, 3)); |
| clk_dm(IMXRT1050_CLK_USDHC2_PODF, |
| imx_clk_divider("usdhc2_podf", "usdhc2_sel", |
| base + 0x24, 16, 3)); |
| clk_dm(IMXRT1050_CLK_LPUART_PODF, |
| imx_clk_divider("lpuart_podf", "lpuart_sel", |
| base + 0x24, 0, 6)); |
| clk_dm(IMXRT1050_CLK_SEMC_PODF, |
| imx_clk_divider("semc_podf", "semc_sel", |
| base + 0x14, 16, 3)); |
| clk_dm(IMXRT1050_CLK_LCDIF_PRED, |
| imx_clk_divider("lcdif_pred", "lcdif_sel", |
| base + 0x38, 12, 3)); |
| clk_dm(IMXRT1050_CLK_LCDIF_PODF, |
| imx_clk_divider("lcdif_podf", "lcdif_pred", |
| base + 0x18, 23, 3)); |
| |
| clk_dm(IMXRT1050_CLK_USDHC1, |
| imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2)); |
| clk_dm(IMXRT1050_CLK_USDHC2, |
| imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4)); |
| clk_dm(IMXRT1050_CLK_LPUART1, |
| imx_clk_gate2("lpuart1", "lpuart_podf", base + 0x7c, 24)); |
| clk_dm(IMXRT1050_CLK_SEMC, |
| imx_clk_gate2("semc", "semc_podf", base + 0x74, 4)); |
| clk_dm(IMXRT1050_CLK_LCDIF_APB, |
| imx_clk_gate2("lcdif", "lcdif_podf", base + 0x70, 28)); |
| clk_dm(IMXRT1050_CLK_LCDIF_PIX, |
| imx_clk_gate2("lcdif_pix", "lcdif", base + 0x74, 10)); |
| clk_dm(IMXRT1050_CLK_USBOH3, |
| imx_clk_gate2("usboh3", "pll3_usb_otg", base + 0x80, 0)); |
| |
| struct clk *clk, *clk1; |
| |
| #ifdef CONFIG_SPL_BUILD |
| /* bypass pll1 before setting its rate */ |
| clk_get_by_id(IMXRT1050_CLK_PLL1_REF_SEL, &clk); |
| clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1); |
| clk_set_parent(clk1, clk); |
| |
| clk_get_by_id(IMXRT1050_CLK_PLL1_ARM, &clk); |
| clk_enable(clk); |
| clk_set_rate(clk, 1056000000UL); |
| |
| clk_get_by_id(IMXRT1050_CLK_PLL1_BYPASS, &clk1); |
| clk_set_parent(clk1, clk); |
| |
| clk_get_by_id(IMXRT1050_CLK_SEMC_SEL, &clk1); |
| clk_get_by_id(IMXRT1050_CLK_SEMC_ALT_SEL, &clk); |
| clk_set_parent(clk1, clk); |
| |
| clk_get_by_id(IMXRT1050_CLK_PLL2_SYS, &clk); |
| clk_enable(clk); |
| clk_set_rate(clk, 528000000UL); |
| |
| clk_get_by_id(IMXRT1050_CLK_PLL2_BYPASS, &clk1); |
| clk_set_parent(clk1, clk); |
| |
| /* Configure PLL3_USB_OTG to 480MHz */ |
| clk_get_by_id(IMXRT1050_CLK_PLL3_USB_OTG, &clk); |
| clk_enable(clk); |
| clk_set_rate(clk, 480000000UL); |
| |
| clk_get_by_id(IMXRT1050_CLK_PLL3_BYPASS, &clk1); |
| clk_set_parent(clk1, clk); |
| #else |
| /* Set PLL5 for LCDIF to its default 650Mhz */ |
| clk_get_by_id(IMXRT1050_CLK_PLL5_VIDEO, &clk); |
| clk_enable(clk); |
| clk_set_rate(clk, 650000000UL); |
| |
| clk_get_by_id(IMXRT1050_CLK_PLL5_BYPASS, &clk1); |
| clk_set_parent(clk1, clk); |
| #endif |
| |
| return 0; |
| } |
| |
| static const struct udevice_id imxrt1050_clk_ids[] = { |
| { .compatible = "fsl,imxrt1050-ccm" }, |
| { }, |
| }; |
| |
| U_BOOT_DRIVER(imxrt1050_clk) = { |
| .name = "clk_imxrt1050", |
| .id = UCLASS_CLK, |
| .of_match = imxrt1050_clk_ids, |
| .ops = &imxrt1050_clk_ops, |
| .probe = imxrt1050_clk_probe, |
| .flags = DM_FLAG_PRE_RELOC, |
| }; |