drivers/i2c/i2c-gpio.c - platform/external/u-boot - Gitiles

 /*
  * (C) Copyright 2015, Samsung Electronics
  * Przemyslaw Marczak <p.marczak@samsung.com>
  *
  * This file is based on: drivers/i2c/soft-i2c.c,
  * with added driver-model support and code cleanup.
  */
 #include <common.h>
 #include <errno.h>
 #include <dm.h>
 #include <i2c.h>
 #include <log.h>
 #include <asm/gpio.h>
 #include <linux/delay.h>

 #define DEFAULT_UDELAY	5
 #define RETRIES		0
 #define I2C_ACK		0
 #define I2C_NOACK	1

 enum {
 	PIN_SDA = 0,
 	PIN_SCL,
 	PIN_COUNT,
 };

 struct i2c_gpio_bus {
 	/**
 	  * udelay - delay [us] between GPIO toggle operations,
 	  * which is 1/4 of I2C speed clock period.
 	 */
 	int udelay;
 	 /* sda, scl */
 	struct gpio_desc gpios[PIN_COUNT];

 	int (*get_sda)(struct i2c_gpio_bus *bus);
 	void (*set_sda)(struct i2c_gpio_bus *bus, int bit);
 	void (*set_scl)(struct i2c_gpio_bus *bus, int bit);
 };

 static int i2c_gpio_sda_get(struct i2c_gpio_bus *bus)
 {
 	struct gpio_desc *sda = &bus->gpios[PIN_SDA];

 	return dm_gpio_get_value(sda);
 }

 static void i2c_gpio_sda_set(struct i2c_gpio_bus *bus, int bit)
 {
 	struct gpio_desc *sda = &bus->gpios[PIN_SDA];

 	if (bit)
 		dm_gpio_set_dir_flags(sda, GPIOD_IS_IN);
 	else
 		dm_gpio_set_dir_flags(sda, GPIOD_IS_OUT);
 }

 static void i2c_gpio_scl_set(struct i2c_gpio_bus *bus, int bit)
 {
 	struct gpio_desc *scl = &bus->gpios[PIN_SCL];
 	int count = 0;

 	if (bit) {
 		dm_gpio_set_dir_flags(scl, GPIOD_IS_IN);
 		while (!dm_gpio_get_value(scl) && count++ < 100000)
 			udelay(1);

 		if (!dm_gpio_get_value(scl))
 			pr_err("timeout waiting on slave to release scl\n");
 	} else {
 		dm_gpio_set_dir_flags(scl, GPIOD_IS_OUT);
 	}
 }

 /* variant for output only gpios which cannot support clock stretching */
 static void i2c_gpio_scl_set_output_only(struct i2c_gpio_bus *bus, int bit)
 {
 	struct gpio_desc *scl = &bus->gpios[PIN_SCL];
 	ulong flags = GPIOD_IS_OUT;

 	if (bit)
 		flags |= GPIOD_IS_OUT_ACTIVE;
 	dm_gpio_set_dir_flags(scl, flags);
 }

 static void i2c_gpio_write_bit(struct i2c_gpio_bus *bus, int delay, uchar bit)
 {
 	bus->set_scl(bus, 0);
 	udelay(delay);
 	bus->set_sda(bus, bit);
 	udelay(delay);
 	bus->set_scl(bus, 1);
 	udelay(2 * delay);
 }

 static int i2c_gpio_read_bit(struct i2c_gpio_bus *bus, int delay)
 {
 	int value;

 	bus->set_scl(bus, 1);
 	udelay(delay);
 	value = bus->get_sda(bus);
 	udelay(delay);
 	bus->set_scl(bus, 0);
 	udelay(2 * delay);

 	return value;
 }

 /* START: High -> Low on SDA while SCL is High */
 static void i2c_gpio_send_start(struct i2c_gpio_bus *bus, int delay)
 {
 	udelay(delay);
 	bus->set_sda(bus, 1);
 	udelay(delay);
 	bus->set_scl(bus, 1);
 	udelay(delay);
 	bus->set_sda(bus, 0);
 	udelay(delay);
 }

 /* STOP: Low -> High on SDA while SCL is High */
 static void i2c_gpio_send_stop(struct i2c_gpio_bus *bus, int delay)
 {
 	bus->set_scl(bus, 0);
 	udelay(delay);
 	bus->set_sda(bus, 0);
 	udelay(delay);
 	bus->set_scl(bus, 1);
 	udelay(delay);
 	bus->set_sda(bus, 1);
 	udelay(delay);
 }

 /* ack should be I2C_ACK or I2C_NOACK */
 static void i2c_gpio_send_ack(struct i2c_gpio_bus *bus, int delay, int ack)
 {
 	i2c_gpio_write_bit(bus, delay, ack);
 	bus->set_scl(bus, 0);
 	udelay(delay);
 }

 /**
  * Send a reset sequence consisting of 9 clocks with the data signal high
  * to clock any confused device back into an idle state.  Also send a
  * <stop> at the end of the sequence for belts & suspenders.
  */
 static void i2c_gpio_send_reset(struct i2c_gpio_bus *bus, int delay)
 {
 	int j;

 	for (j = 0; j < 9; j++)
 		i2c_gpio_write_bit(bus, delay, 1);

 	i2c_gpio_send_stop(bus, delay);
 }

 /* Set sda high with low clock, before reading slave data */
 static void i2c_gpio_sda_high(struct i2c_gpio_bus *bus, int delay)
 {
 	bus->set_scl(bus, 0);
 	udelay(delay);
 	bus->set_sda(bus, 1);
 	udelay(delay);
 }

 /* Send 8 bits and look for an acknowledgement */
 static int i2c_gpio_write_byte(struct i2c_gpio_bus *bus, int delay, uchar data)
 {
 	int j;
 	int nack;

 	for (j = 0; j < 8; j++) {
 		i2c_gpio_write_bit(bus, delay, data & 0x80);
 		data <<= 1;
 	}

 	udelay(delay);

 	/* Look for an <ACK>(negative logic) and return it */
 	i2c_gpio_sda_high(bus, delay);
 	nack = i2c_gpio_read_bit(bus, delay);

 	return nack;	/* not a nack is an ack */
 }

 /**
  * if ack == I2C_ACK, ACK the byte so can continue reading, else
  * send I2C_NOACK to end the read.
  */
 static uchar i2c_gpio_read_byte(struct i2c_gpio_bus *bus, int delay, int ack)
 {
 	int  data;
 	int  j;

 	i2c_gpio_sda_high(bus, delay);
 	data = 0;
 	for (j = 0; j < 8; j++) {
 		data <<= 1;
 		data |= i2c_gpio_read_bit(bus, delay);
 	}
 	i2c_gpio_send_ack(bus, delay, ack);

 	return data;
 }

 /* send start and the slave chip address */
 int i2c_send_slave_addr(struct i2c_gpio_bus *bus, int delay, uchar chip)
 {
 	i2c_gpio_send_start(bus, delay);

 	if (i2c_gpio_write_byte(bus, delay, chip)) {
 		i2c_gpio_send_stop(bus, delay);
 		return -EIO;
 	}

 	return 0;
 }

 static int i2c_gpio_write_data(struct i2c_gpio_bus *bus, uchar chip,
 			       uchar *buffer, int len,
 			       bool end_with_repeated_start)
 {
 	unsigned int delay = bus->udelay;
 	int failures = 0;

 	debug("%s: chip %x buffer %p len %d\n", __func__, chip, buffer, len);

 	if (i2c_send_slave_addr(bus, delay, chip << 1)) {
 		debug("i2c_write, no chip responded %02X\n", chip);
 		return -EIO;
 	}

 	while (len-- > 0) {
 		if (i2c_gpio_write_byte(bus, delay, *buffer++))
 			failures++;
 	}

 	if (!end_with_repeated_start) {
 		i2c_gpio_send_stop(bus, delay);
 		return failures;
 	}

 	if (i2c_send_slave_addr(bus, delay, (chip << 1) | 0x1)) {
 		debug("i2c_write, no chip responded %02X\n", chip);
 		return -EIO;
 	}

 	return failures;
 }

 static int i2c_gpio_read_data(struct i2c_gpio_bus *bus, uchar chip,
 			      uchar *buffer, int len)
 {
 	unsigned int delay = bus->udelay;

 	debug("%s: chip %x buffer: %p len %d\n", __func__, chip, buffer, len);

 	while (len-- > 0)
 		*buffer++ = i2c_gpio_read_byte(bus, delay, len == 0);

 	i2c_gpio_send_stop(bus, delay);

 	return 0;
 }

 static int i2c_gpio_xfer(struct udevice *dev, struct i2c_msg *msg, int nmsgs)
 {
 	struct i2c_gpio_bus *bus = dev_get_priv(dev);
 	int ret;

 	for (; nmsgs > 0; nmsgs--, msg++) {
 		bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);

 		if (msg->flags & I2C_M_RD) {
 			ret = i2c_gpio_read_data(bus, msg->addr, msg->buf,
 						 msg->len);
 		} else {
 			ret = i2c_gpio_write_data(bus, msg->addr, msg->buf,
 						  msg->len, next_is_read);
 		}

 		if (ret)
 			return -EREMOTEIO;
 	}

 	return 0;
 }

 static int i2c_gpio_probe(struct udevice *dev, uint chip, uint chip_flags)
 {
 	struct i2c_gpio_bus *bus = dev_get_priv(dev);
 	unsigned int delay = bus->udelay;
 	int ret;

 	i2c_gpio_send_start(bus, delay);
 	ret = i2c_gpio_write_byte(bus, delay, (chip << 1) | 0);
 	i2c_gpio_send_stop(bus, delay);

 	debug("%s: bus: %d (%s) chip: %x flags: %x ret: %d\n",
 	      __func__, dev->seq, dev->name, chip, chip_flags, ret);

 	return ret;
 }

 static int i2c_gpio_set_bus_speed(struct udevice *dev, unsigned int speed_hz)
 {
 	struct i2c_gpio_bus *bus = dev_get_priv(dev);

 	bus->udelay = 1000000 / (speed_hz << 2);

 	i2c_gpio_send_reset(bus, bus->udelay);

 	return 0;
 }

 static int i2c_gpio_drv_probe(struct udevice *dev)
 {
 	if (dev_read_bool(dev, "i2c-gpio,deblock")) {
 		/* @200kHz 9 clocks = 44us, 62us is ok */
 		const unsigned int DELAY_ABORT_SEQ = 62;
 		struct i2c_gpio_bus *bus = dev_get_priv(dev);

 		return i2c_deblock_gpio_loop(&bus->gpios[PIN_SDA],
 					     &bus->gpios[PIN_SCL],
 					     16, 5, DELAY_ABORT_SEQ);
 	}

 	return 0;
 }

 static int i2c_gpio_ofdata_to_platdata(struct udevice *dev)
 {
 	struct i2c_gpio_bus *bus = dev_get_priv(dev);
 	int ret;

 	ret = gpio_request_list_by_name(dev, "gpios", bus->gpios,
 					ARRAY_SIZE(bus->gpios), 0);
 	if (ret < 0)
 		goto error;

 	bus->udelay = dev_read_u32_default(dev, "i2c-gpio,delay-us",
 					   DEFAULT_UDELAY);

 	bus->get_sda = i2c_gpio_sda_get;
 	bus->set_sda = i2c_gpio_sda_set;
 	if (dev_read_bool(dev, "i2c-gpio,scl-output-only"))
 		bus->set_scl = i2c_gpio_scl_set_output_only;
 	else
 		bus->set_scl = i2c_gpio_scl_set;

 	return 0;
 error:
 	pr_err("Can't get %s gpios! Error: %d", dev->name, ret);
 	return ret;
 }

 static const struct dm_i2c_ops i2c_gpio_ops = {
 	.xfer		= i2c_gpio_xfer,
 	.probe_chip	= i2c_gpio_probe,
 	.set_bus_speed	= i2c_gpio_set_bus_speed,
 };

 static const struct udevice_id i2c_gpio_ids[] = {
 	{ .compatible = "i2c-gpio" },
 	{ }
 };

 U_BOOT_DRIVER(i2c_gpio) = {
 	.name	= "i2c-gpio",
 	.id	= UCLASS_I2C,
 	.of_match = i2c_gpio_ids,
 	.probe	= i2c_gpio_drv_probe,
 	.ofdata_to_platdata = i2c_gpio_ofdata_to_platdata,
 	.priv_auto_alloc_size = sizeof(struct i2c_gpio_bus),
 	.ops	= &i2c_gpio_ops,
 };
	/*
	* (C) Copyright 2015, Samsung Electronics
	* Przemyslaw Marczak <p.marczak@samsung.com>
	*
	* This file is based on: drivers/i2c/soft-i2c.c,
	* with added driver-model support and code cleanup.
	*/
	#include <common.h>
	#include <errno.h>
	#include <dm.h>
	#include <i2c.h>
	#include <log.h>
	#include <asm/gpio.h>
	#include <linux/delay.h>

	#define DEFAULT_UDELAY 5
	#define RETRIES 0
	#define I2C_ACK 0
	#define I2C_NOACK 1

	enum {
	PIN_SDA = 0,
	PIN_SCL,
	PIN_COUNT,
	};

	struct i2c_gpio_bus {
	/**
	* udelay - delay [us] between GPIO toggle operations,
	* which is 1/4 of I2C speed clock period.
	*/
	int udelay;
	/* sda, scl */
	struct gpio_desc gpios[PIN_COUNT];

	int (get_sda)(struct i2c_gpio_bus bus);
	void (set_sda)(struct i2c_gpio_bus bus, int bit);
	void (set_scl)(struct i2c_gpio_bus bus, int bit);
	};

	static int i2c_gpio_sda_get(struct i2c_gpio_bus *bus)
	{
	struct gpio_desc *sda = &bus->gpios[PIN_SDA];

	return dm_gpio_get_value(sda);
	}

	static void i2c_gpio_sda_set(struct i2c_gpio_bus *bus, int bit)
	{
	struct gpio_desc *sda = &bus->gpios[PIN_SDA];

	if (bit)
	dm_gpio_set_dir_flags(sda, GPIOD_IS_IN);
	else
	dm_gpio_set_dir_flags(sda, GPIOD_IS_OUT);
	}

	static void i2c_gpio_scl_set(struct i2c_gpio_bus *bus, int bit)
	{
	struct gpio_desc *scl = &bus->gpios[PIN_SCL];
	int count = 0;

	if (bit) {
	dm_gpio_set_dir_flags(scl, GPIOD_IS_IN);
	while (!dm_gpio_get_value(scl) && count++ < 100000)
	udelay(1);

	if (!dm_gpio_get_value(scl))
	pr_err("timeout waiting on slave to release scl\n");
	} else {
	dm_gpio_set_dir_flags(scl, GPIOD_IS_OUT);
	}
	}

	/* variant for output only gpios which cannot support clock stretching */
	static void i2c_gpio_scl_set_output_only(struct i2c_gpio_bus *bus, int bit)
	{
	struct gpio_desc *scl = &bus->gpios[PIN_SCL];
	ulong flags = GPIOD_IS_OUT;

	if (bit)
	flags \|= GPIOD_IS_OUT_ACTIVE;
	dm_gpio_set_dir_flags(scl, flags);
	}

	static void i2c_gpio_write_bit(struct i2c_gpio_bus *bus, int delay, uchar bit)
	{
	bus->set_scl(bus, 0);
	udelay(delay);
	bus->set_sda(bus, bit);
	udelay(delay);
	bus->set_scl(bus, 1);
	udelay(2 * delay);
	}

	static int i2c_gpio_read_bit(struct i2c_gpio_bus *bus, int delay)
	{
	int value;

	bus->set_scl(bus, 1);
	udelay(delay);
	value = bus->get_sda(bus);
	udelay(delay);
	bus->set_scl(bus, 0);
	udelay(2 * delay);

	return value;
	}

	/* START: High -> Low on SDA while SCL is High */
	static void i2c_gpio_send_start(struct i2c_gpio_bus *bus, int delay)
	{
	udelay(delay);
	bus->set_sda(bus, 1);
	udelay(delay);
	bus->set_scl(bus, 1);
	udelay(delay);
	bus->set_sda(bus, 0);
	udelay(delay);
	}

	/* STOP: Low -> High on SDA while SCL is High */
	static void i2c_gpio_send_stop(struct i2c_gpio_bus *bus, int delay)
	{
	bus->set_scl(bus, 0);
	udelay(delay);
	bus->set_sda(bus, 0);
	udelay(delay);
	bus->set_scl(bus, 1);
	udelay(delay);
	bus->set_sda(bus, 1);
	udelay(delay);
	}

	/* ack should be I2C_ACK or I2C_NOACK */
	static void i2c_gpio_send_ack(struct i2c_gpio_bus *bus, int delay, int ack)
	{
	i2c_gpio_write_bit(bus, delay, ack);
	bus->set_scl(bus, 0);
	udelay(delay);
	}

	/**
	* Send a reset sequence consisting of 9 clocks with the data signal high
	* to clock any confused device back into an idle state. Also send a
	* <stop> at the end of the sequence for belts & suspenders.
	*/
	static void i2c_gpio_send_reset(struct i2c_gpio_bus *bus, int delay)
	{
	int j;

	for (j = 0; j < 9; j++)
	i2c_gpio_write_bit(bus, delay, 1);

	i2c_gpio_send_stop(bus, delay);
	}

	/* Set sda high with low clock, before reading slave data */
	static void i2c_gpio_sda_high(struct i2c_gpio_bus *bus, int delay)
	{
	bus->set_scl(bus, 0);
	udelay(delay);
	bus->set_sda(bus, 1);
	udelay(delay);
	}

	/* Send 8 bits and look for an acknowledgement */
	static int i2c_gpio_write_byte(struct i2c_gpio_bus *bus, int delay, uchar data)
	{
	int j;
	int nack;

	for (j = 0; j < 8; j++) {
	i2c_gpio_write_bit(bus, delay, data & 0x80);
	data <<= 1;
	}

	udelay(delay);

	/* Look for an <ACK>(negative logic) and return it */
	i2c_gpio_sda_high(bus, delay);
	nack = i2c_gpio_read_bit(bus, delay);

	return nack; /* not a nack is an ack */
	}

	/**
	* if ack == I2C_ACK, ACK the byte so can continue reading, else
	* send I2C_NOACK to end the read.
	*/
	static uchar i2c_gpio_read_byte(struct i2c_gpio_bus *bus, int delay, int ack)
	{
	int data;
	int j;

	i2c_gpio_sda_high(bus, delay);
	data = 0;
	for (j = 0; j < 8; j++) {
	data <<= 1;
	data \|= i2c_gpio_read_bit(bus, delay);
	}
	i2c_gpio_send_ack(bus, delay, ack);

	return data;
	}

	/* send start and the slave chip address */
	int i2c_send_slave_addr(struct i2c_gpio_bus *bus, int delay, uchar chip)
	{
	i2c_gpio_send_start(bus, delay);

	if (i2c_gpio_write_byte(bus, delay, chip)) {
	i2c_gpio_send_stop(bus, delay);
	return -EIO;
	}

	return 0;
	}

	static int i2c_gpio_write_data(struct i2c_gpio_bus *bus, uchar chip,
	uchar *buffer, int len,
	bool end_with_repeated_start)
	{
	unsigned int delay = bus->udelay;
	int failures = 0;

	debug("%s: chip %x buffer %p len %d\n", __func__, chip, buffer, len);

	if (i2c_send_slave_addr(bus, delay, chip << 1)) {
	debug("i2c_write, no chip responded %02X\n", chip);
	return -EIO;
	}

	while (len-- > 0) {
	if (i2c_gpio_write_byte(bus, delay, *buffer++))
	failures++;
	}

	if (!end_with_repeated_start) {
	i2c_gpio_send_stop(bus, delay);
	return failures;
	}

	if (i2c_send_slave_addr(bus, delay, (chip << 1) \| 0x1)) {
	debug("i2c_write, no chip responded %02X\n", chip);
	return -EIO;
	}

	return failures;
	}

	static int i2c_gpio_read_data(struct i2c_gpio_bus *bus, uchar chip,
	uchar *buffer, int len)
	{
	unsigned int delay = bus->udelay;

	debug("%s: chip %x buffer: %p len %d\n", __func__, chip, buffer, len);

	while (len-- > 0)
	*buffer++ = i2c_gpio_read_byte(bus, delay, len == 0);

	i2c_gpio_send_stop(bus, delay);

	return 0;
	}

	static int i2c_gpio_xfer(struct udevice dev, struct i2c_msg msg, int nmsgs)
	{
	struct i2c_gpio_bus *bus = dev_get_priv(dev);
	int ret;

	for (; nmsgs > 0; nmsgs--, msg++) {
	bool next_is_read = nmsgs > 1 && (msg[1].flags & I2C_M_RD);

	if (msg->flags & I2C_M_RD) {
	ret = i2c_gpio_read_data(bus, msg->addr, msg->buf,
	msg->len);
	} else {
	ret = i2c_gpio_write_data(bus, msg->addr, msg->buf,
	msg->len, next_is_read);
	}

	if (ret)
	return -EREMOTEIO;
	}

	return 0;
	}

	static int i2c_gpio_probe(struct udevice *dev, uint chip, uint chip_flags)
	{
	struct i2c_gpio_bus *bus = dev_get_priv(dev);
	unsigned int delay = bus->udelay;
	int ret;

	i2c_gpio_send_start(bus, delay);
	ret = i2c_gpio_write_byte(bus, delay, (chip << 1) \| 0);
	i2c_gpio_send_stop(bus, delay);

	debug("%s: bus: %d (%s) chip: %x flags: %x ret: %d\n",
	__func__, dev->seq, dev->name, chip, chip_flags, ret);

	return ret;
	}

	static int i2c_gpio_set_bus_speed(struct udevice *dev, unsigned int speed_hz)
	{
	struct i2c_gpio_bus *bus = dev_get_priv(dev);

	bus->udelay = 1000000 / (speed_hz << 2);

	i2c_gpio_send_reset(bus, bus->udelay);

	return 0;
	}

	static int i2c_gpio_drv_probe(struct udevice *dev)
	{
	if (dev_read_bool(dev, "i2c-gpio,deblock")) {
	/* @200kHz 9 clocks = 44us, 62us is ok */
	const unsigned int DELAY_ABORT_SEQ = 62;
	struct i2c_gpio_bus *bus = dev_get_priv(dev);

	return i2c_deblock_gpio_loop(&bus->gpios[PIN_SDA],
	&bus->gpios[PIN_SCL],
	16, 5, DELAY_ABORT_SEQ);
	}

	return 0;
	}

	static int i2c_gpio_ofdata_to_platdata(struct udevice *dev)
	{
	struct i2c_gpio_bus *bus = dev_get_priv(dev);
	int ret;

	ret = gpio_request_list_by_name(dev, "gpios", bus->gpios,
	ARRAY_SIZE(bus->gpios), 0);
	if (ret < 0)
	goto error;

	bus->udelay = dev_read_u32_default(dev, "i2c-gpio,delay-us",
	DEFAULT_UDELAY);

	bus->get_sda = i2c_gpio_sda_get;
	bus->set_sda = i2c_gpio_sda_set;
	if (dev_read_bool(dev, "i2c-gpio,scl-output-only"))
	bus->set_scl = i2c_gpio_scl_set_output_only;
	else
	bus->set_scl = i2c_gpio_scl_set;

	return 0;
	error:
	pr_err("Can't get %s gpios! Error: %d", dev->name, ret);
	return ret;
	}

	static const struct dm_i2c_ops i2c_gpio_ops = {
	.xfer = i2c_gpio_xfer,
	.probe_chip = i2c_gpio_probe,
	.set_bus_speed = i2c_gpio_set_bus_speed,
	};

	static const struct udevice_id i2c_gpio_ids[] = {
	{ .compatible = "i2c-gpio" },
	{ }
	};

	U_BOOT_DRIVER(i2c_gpio) = {
	.name = "i2c-gpio",
	.id = UCLASS_I2C,
	.of_match = i2c_gpio_ids,
	.probe = i2c_gpio_drv_probe,
	.ofdata_to_platdata = i2c_gpio_ofdata_to_platdata,
	.priv_auto_alloc_size = sizeof(struct i2c_gpio_bus),
	.ops = &i2c_gpio_ops,
	};