| /* |
| ------------------------------------------------------------------------- |
| * Filename: jffs2.c |
| * Version: $Id: jffs2_1pass.c,v 1.7 2002/01/25 01:56:47 nyet Exp $ |
| * Copyright: Copyright (C) 2001, Russ Dill |
| * Author: Russ Dill <Russ.Dill@asu.edu> |
| * Description: Module to load kernel from jffs2 |
| *-----------------------------------------------------------------------*/ |
| /* |
| * some portions of this code are taken from jffs2, and as such, the |
| * following copyright notice is included. |
| * |
| * JFFS2 -- Journalling Flash File System, Version 2. |
| * |
| * Copyright (C) 2001 Red Hat, Inc. |
| * |
| * Created by David Woodhouse <dwmw2@cambridge.redhat.com> |
| * |
| * The original JFFS, from which the design for JFFS2 was derived, |
| * was designed and implemented by Axis Communications AB. |
| * |
| * The contents of this file are subject to the Red Hat eCos Public |
| * License Version 1.1 (the "Licence"); you may not use this file |
| * except in compliance with the Licence. You may obtain a copy of |
| * the Licence at http://www.redhat.com/ |
| * |
| * Software distributed under the Licence is distributed on an "AS IS" |
| * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. |
| * See the Licence for the specific language governing rights and |
| * limitations under the Licence. |
| * |
| * The Original Code is JFFS2 - Journalling Flash File System, version 2 |
| * |
| * Alternatively, the contents of this file may be used under the |
| * terms of the GNU General Public License version 2 (the "GPL"), in |
| * which case the provisions of the GPL are applicable instead of the |
| * above. If you wish to allow the use of your version of this file |
| * only under the terms of the GPL and not to allow others to use your |
| * version of this file under the RHEPL, indicate your decision by |
| * deleting the provisions above and replace them with the notice and |
| * other provisions required by the GPL. If you do not delete the |
| * provisions above, a recipient may use your version of this file |
| * under either the RHEPL or the GPL. |
| * |
| * $Id: jffs2_1pass.c,v 1.7 2002/01/25 01:56:47 nyet Exp $ |
| * |
| */ |
| |
| /* Ok, so anyone who knows the jffs2 code will probably want to get a papar |
| * bag to throw up into before reading this code. I looked through the jffs2 |
| * code, the caching scheme is very elegant. I tried to keep the version |
| * for a bootloader as small and simple as possible. Instead of worring about |
| * unneccesary data copies, node scans, etc, I just optimized for the known |
| * common case, a kernel, which looks like: |
| * (1) most pages are 4096 bytes |
| * (2) version numbers are somewhat sorted in acsending order |
| * (3) multiple compressed blocks making up one page is uncommon |
| * |
| * So I create a linked list of decending version numbers (insertions at the |
| * head), and then for each page, walk down the list, until a matching page |
| * with 4096 bytes is found, and then decompress the watching pages in |
| * reverse order. |
| * |
| */ |
| |
| /* |
| * Adapted by Nye Liu <nyet@zumanetworks.com> and |
| * Rex Feany <rfeany@zumanetworks.com> |
| * on Jan/2002 for U-Boot. |
| * |
| * Clipped out all the non-1pass functions, cleaned up warnings, |
| * wrappers, etc. No major changes to the code. |
| * Please, he really means it when he said have a paper bag |
| * handy. We needed it ;). |
| * |
| */ |
| |
| /* |
| * Bugfixing by Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>, (C) Mar/2003 |
| * |
| * - overhaul of the memory management. Removed much of the "paper-bagging" |
| * in that part of the code, fixed several bugs, now frees memory when |
| * partition is changed. |
| * It's still ugly :-( |
| * - fixed a bug in jffs2_1pass_read_inode where the file length calculation |
| * was incorrect. Removed a bit of the paper-bagging as well. |
| * - removed double crc calculation for fragment headers in jffs2_private.h |
| * for speedup. |
| * - scan_empty rewritten in a more "standard" manner (non-paperbag, that is). |
| * - spinning wheel now spins depending on how much memory has been scanned |
| * - lots of small changes all over the place to "improve" readability. |
| * - implemented fragment sorting to ensure that the newest data is copied |
| * if there are multiple copies of fragments for a certain file offset. |
| * |
| * The fragment sorting feature must be enabled by CFG_JFFS2_SORT_FRAGMENTS. |
| * Sorting is done while adding fragments to the lists, which is more or less a |
| * bubble sort. This takes a lot of time, and is most probably not an issue if |
| * the boot filesystem is always mounted readonly. |
| * |
| * You should define it if the boot filesystem is mounted writable, and updates |
| * to the boot files are done by copying files to that filesystem. |
| * |
| * |
| * There's a big issue left: endianess is completely ignored in this code. Duh! |
| * |
| * |
| * You still should have paper bags at hand :-(. The code lacks more or less |
| * any comment, and is still arcane and difficult to read in places. As this |
| * might be incompatible with any new code from the jffs2 maintainers anyway, |
| * it should probably be dumped and replaced by something like jffs2reader! |
| */ |
| |
| |
| #include <common.h> |
| #include <config.h> |
| #include <malloc.h> |
| #include <linux/stat.h> |
| #include <linux/time.h> |
| |
| #if (CONFIG_COMMANDS & CFG_CMD_JFFS2) |
| |
| #include <jffs2/jffs2.h> |
| #include <jffs2/jffs2_1pass.h> |
| |
| #include "jffs2_private.h" |
| |
| |
| #define NODE_CHUNK 1024 /* size of memory allocation chunk in b_nodes */ |
| #define SPIN_BLKSIZE 18 /* spin after having scanned 1<<BLKSIZE bytes */ |
| |
| /* Debugging switches */ |
| #undef DEBUG_DIRENTS /* print directory entry list after scan */ |
| #undef DEBUG_FRAGMENTS /* print fragment list after scan */ |
| #undef DEBUG /* enable debugging messages */ |
| |
| |
| #ifdef DEBUG |
| # define DEBUGF(fmt,args...) printf(fmt ,##args) |
| #else |
| # define DEBUGF(fmt,args...) |
| #endif |
| |
| |
| /* Compression names */ |
| static char *compr_names[] = { |
| "NONE", |
| "ZERO", |
| "RTIME", |
| "RUBINMIPS", |
| "COPY", |
| "DYNRUBIN", |
| "ZLIB" |
| }; |
| |
| /* Spinning wheel */ |
| static char spinner[] = { '|', '/', '-', '\\' }; |
| |
| /* Memory management */ |
| struct mem_block { |
| u32 index; |
| struct mem_block *next; |
| struct b_node nodes[NODE_CHUNK]; |
| }; |
| |
| |
| static void |
| free_nodes(struct b_list *list) |
| { |
| while (list->listMemBase != NULL) { |
| struct mem_block *next = list->listMemBase->next; |
| free( list->listMemBase ); |
| list->listMemBase = next; |
| } |
| } |
| |
| static struct b_node * |
| add_node(struct b_list *list) |
| { |
| u32 index = 0; |
| struct mem_block *memBase; |
| struct b_node *b; |
| |
| memBase = list->listMemBase; |
| if (memBase != NULL) |
| index = memBase->index; |
| #if 0 |
| putLabeledWord("add_node: index = ", index); |
| putLabeledWord("add_node: memBase = ", list->listMemBase); |
| #endif |
| |
| if (memBase == NULL || index >= NODE_CHUNK) { |
| /* we need more space before we continue */ |
| memBase = mmalloc(sizeof(struct mem_block)); |
| if (memBase == NULL) { |
| putstr("add_node: malloc failed\n"); |
| return NULL; |
| } |
| memBase->next = list->listMemBase; |
| index = 0; |
| #if 0 |
| putLabeledWord("add_node: alloced a new membase at ", *memBase); |
| #endif |
| |
| } |
| /* now we have room to add it. */ |
| b = &memBase->nodes[index]; |
| index ++; |
| |
| memBase->index = index; |
| list->listMemBase = memBase; |
| list->listCount++; |
| return b; |
| } |
| |
| static struct b_node * |
| insert_node(struct b_list *list, u32 offset) |
| { |
| struct b_node *new; |
| #ifdef CFG_JFFS2_SORT_FRAGMENTS |
| struct b_node *b, *prev; |
| #endif |
| |
| if (!(new = add_node(list))) { |
| putstr("add_node failed!\r\n"); |
| return NULL; |
| } |
| new->offset = offset; |
| |
| #ifdef CFG_JFFS2_SORT_FRAGMENTS |
| if (list->listTail != NULL && list->listCompare(new, list->listTail)) |
| prev = list->listTail; |
| else if (list->listLast != NULL && list->listCompare(new, list->listLast)) |
| prev = list->listLast; |
| else |
| prev = NULL; |
| |
| for (b = (prev ? prev->next : list->listHead); |
| b != NULL && list->listCompare(new, b); |
| prev = b, b = b->next) { |
| list->listLoops++; |
| } |
| if (b != NULL) |
| list->listLast = prev; |
| |
| if (b != NULL) { |
| new->next = b; |
| if (prev != NULL) |
| prev->next = new; |
| else |
| list->listHead = new; |
| } else |
| #endif |
| { |
| new->next = (struct b_node *) NULL; |
| if (list->listTail != NULL) { |
| list->listTail->next = new; |
| list->listTail = new; |
| } else { |
| list->listTail = list->listHead = new; |
| } |
| } |
| |
| return new; |
| } |
| |
| #ifdef CFG_JFFS2_SORT_FRAGMENTS |
| /* Sort data entries with the latest version last, so that if there |
| * is overlapping data the latest version will be used. |
| */ |
| static int compare_inodes(struct b_node *new, struct b_node *old) |
| { |
| struct jffs2_raw_inode *jNew = (struct jffs2_raw_inode *)new->offset; |
| struct jffs2_raw_inode *jOld = (struct jffs2_raw_inode *)old->offset; |
| |
| return jNew->version > jOld->version; |
| } |
| |
| /* Sort directory entries so all entries in the same directory |
| * with the same name are grouped together, with the latest version |
| * last. This makes it easy to eliminate all but the latest version |
| * by marking the previous version dead by setting the inode to 0. |
| */ |
| static int compare_dirents(struct b_node *new, struct b_node *old) |
| { |
| struct jffs2_raw_dirent *jNew = (struct jffs2_raw_dirent *)new->offset; |
| struct jffs2_raw_dirent *jOld = (struct jffs2_raw_dirent *)old->offset; |
| int cmp; |
| |
| /* ascending sort by pino */ |
| if (jNew->pino != jOld->pino) |
| return jNew->pino > jOld->pino; |
| |
| /* pino is the same, so use ascending sort by nsize, so |
| * we don't do strncmp unless we really must. |
| */ |
| if (jNew->nsize != jOld->nsize) |
| return jNew->nsize > jOld->nsize; |
| |
| /* length is also the same, so use ascending sort by name |
| */ |
| cmp = strncmp(jNew->name, jOld->name, jNew->nsize); |
| if (cmp != 0) |
| return cmp > 0; |
| |
| /* we have duplicate names in this directory, so use ascending |
| * sort by version |
| */ |
| if (jNew->version > jOld->version) { |
| /* since jNew is newer, we know jOld is not valid, so |
| * mark it with inode 0 and it will not be used |
| */ |
| jOld->ino = 0; |
| return 1; |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| static u32 |
| jffs2_scan_empty(u32 start_offset, struct part_info *part) |
| { |
| char *max = part->offset + part->size - sizeof(struct jffs2_raw_inode); |
| char *offset = part->offset + start_offset; |
| |
| while (offset < max && *(u32 *)offset == 0xFFFFFFFF) { |
| offset += sizeof(u32); |
| /* return if spinning is due */ |
| if (((u32)offset & ((1 << SPIN_BLKSIZE)-1)) == 0) break; |
| } |
| |
| return offset - part->offset; |
| } |
| |
| static u32 |
| jffs_init_1pass_list(struct part_info *part) |
| { |
| struct b_lists *pL; |
| |
| if (part->jffs2_priv != NULL) { |
| pL = (struct b_lists *)part->jffs2_priv; |
| free_nodes(&pL->frag); |
| free_nodes(&pL->dir); |
| free(pL); |
| } |
| if (NULL != (part->jffs2_priv = malloc(sizeof(struct b_lists)))) { |
| pL = (struct b_lists *)part->jffs2_priv; |
| |
| memset(pL, 0, sizeof(*pL)); |
| #ifdef CFG_JFFS2_SORT_FRAGMENTS |
| pL->dir.listCompare = compare_dirents; |
| pL->frag.listCompare = compare_inodes; |
| #endif |
| } |
| return 0; |
| } |
| |
| /* find the inode from the slashless name given a parent */ |
| static long |
| jffs2_1pass_read_inode(struct b_lists *pL, u32 inode, char *dest) |
| { |
| struct b_node *b; |
| struct jffs2_raw_inode *jNode; |
| u32 totalSize = 0; |
| u32 latestVersion = 0; |
| char *lDest; |
| char *src; |
| long ret; |
| int i; |
| u32 counter = 0; |
| #ifdef CFG_JFFS2_SORT_FRAGMENTS |
| /* Find file size before loading any data, so fragments that |
| * start past the end of file can be ignored. A fragment |
| * that is partially in the file is loaded, so extra data may |
| * be loaded up to the next 4K boundary above the file size. |
| * This shouldn't cause trouble when loading kernel images, so |
| * we will live with it. |
| */ |
| for (b = pL->frag.listHead; b != NULL; b = b->next) { |
| jNode = (struct jffs2_raw_inode *) (b->offset); |
| if ((inode == jNode->ino)) { |
| /* get actual file length from the newest node */ |
| if (jNode->version >= latestVersion) { |
| totalSize = jNode->isize; |
| latestVersion = jNode->version; |
| } |
| } |
| } |
| #endif |
| |
| for (b = pL->frag.listHead; b != NULL; b = b->next) { |
| jNode = (struct jffs2_raw_inode *) (b->offset); |
| if ((inode == jNode->ino)) { |
| #if 0 |
| putLabeledWord("\r\n\r\nread_inode: totlen = ", jNode->totlen); |
| putLabeledWord("read_inode: inode = ", jNode->ino); |
| putLabeledWord("read_inode: version = ", jNode->version); |
| putLabeledWord("read_inode: isize = ", jNode->isize); |
| putLabeledWord("read_inode: offset = ", jNode->offset); |
| putLabeledWord("read_inode: csize = ", jNode->csize); |
| putLabeledWord("read_inode: dsize = ", jNode->dsize); |
| putLabeledWord("read_inode: compr = ", jNode->compr); |
| putLabeledWord("read_inode: usercompr = ", jNode->usercompr); |
| putLabeledWord("read_inode: flags = ", jNode->flags); |
| #endif |
| |
| #ifndef CFG_JFFS2_SORT_FRAGMENTS |
| /* get actual file length from the newest node */ |
| if (jNode->version >= latestVersion) { |
| totalSize = jNode->isize; |
| latestVersion = jNode->version; |
| } |
| #endif |
| |
| if(dest) { |
| src = ((char *) jNode) + sizeof(struct jffs2_raw_inode); |
| /* ignore data behind latest known EOF */ |
| if (jNode->offset > totalSize) |
| continue; |
| |
| lDest = (char *) (dest + jNode->offset); |
| #if 0 |
| putLabeledWord("read_inode: src = ", src); |
| putLabeledWord("read_inode: dest = ", lDest); |
| #endif |
| switch (jNode->compr) { |
| case JFFS2_COMPR_NONE: |
| ret = (unsigned long) ldr_memcpy(lDest, src, jNode->dsize); |
| break; |
| case JFFS2_COMPR_ZERO: |
| ret = 0; |
| for (i = 0; i < jNode->dsize; i++) |
| *(lDest++) = 0; |
| break; |
| case JFFS2_COMPR_RTIME: |
| ret = 0; |
| rtime_decompress(src, lDest, jNode->csize, jNode->dsize); |
| break; |
| case JFFS2_COMPR_DYNRUBIN: |
| /* this is slow but it works */ |
| ret = 0; |
| dynrubin_decompress(src, lDest, jNode->csize, jNode->dsize); |
| break; |
| case JFFS2_COMPR_ZLIB: |
| ret = zlib_decompress(src, lDest, jNode->csize, jNode->dsize); |
| break; |
| default: |
| /* unknown */ |
| putLabeledWord("UNKOWN COMPRESSION METHOD = ", jNode->compr); |
| return -1; |
| break; |
| } |
| } |
| |
| #if 0 |
| putLabeledWord("read_inode: totalSize = ", totalSize); |
| putLabeledWord("read_inode: compr ret = ", ret); |
| #endif |
| } |
| counter++; |
| } |
| |
| #if 0 |
| putLabeledWord("read_inode: returning = ", totalSize); |
| #endif |
| return totalSize; |
| } |
| |
| /* find the inode from the slashless name given a parent */ |
| static u32 |
| jffs2_1pass_find_inode(struct b_lists * pL, const char *name, u32 pino) |
| { |
| struct b_node *b; |
| struct jffs2_raw_dirent *jDir; |
| int len; |
| u32 counter; |
| u32 version = 0; |
| u32 inode = 0; |
| |
| /* name is assumed slash free */ |
| len = strlen(name); |
| |
| counter = 0; |
| /* we need to search all and return the inode with the highest version */ |
| for(b = pL->dir.listHead; b; b = b->next, counter++) { |
| jDir = (struct jffs2_raw_dirent *) (b->offset); |
| if ((pino == jDir->pino) && (len == jDir->nsize) && |
| (jDir->ino) && /* 0 for unlink */ |
| (!strncmp(jDir->name, name, len))) { /* a match */ |
| if (jDir->version < version) |
| continue; |
| |
| if (jDir->version == version && inode != 0) { |
| /* I'm pretty sure this isn't legal */ |
| putstr(" ** ERROR ** "); |
| putnstr(jDir->name, jDir->nsize); |
| putLabeledWord(" has dup version =", version); |
| } |
| inode = jDir->ino; |
| version = jDir->version; |
| } |
| #if 0 |
| putstr("\r\nfind_inode:p&l ->"); |
| putnstr(jDir->name, jDir->nsize); |
| putstr("\r\n"); |
| putLabeledWord("pino = ", jDir->pino); |
| putLabeledWord("nsize = ", jDir->nsize); |
| putLabeledWord("b = ", (u32) b); |
| putLabeledWord("counter = ", counter); |
| #endif |
| } |
| return inode; |
| } |
| |
| char *mkmodestr(unsigned long mode, char *str) |
| { |
| static const char *l = "xwr"; |
| int mask = 1, i; |
| char c; |
| |
| switch (mode & S_IFMT) { |
| case S_IFDIR: str[0] = 'd'; break; |
| case S_IFBLK: str[0] = 'b'; break; |
| case S_IFCHR: str[0] = 'c'; break; |
| case S_IFIFO: str[0] = 'f'; break; |
| case S_IFLNK: str[0] = 'l'; break; |
| case S_IFSOCK: str[0] = 's'; break; |
| case S_IFREG: str[0] = '-'; break; |
| default: str[0] = '?'; |
| } |
| |
| for(i = 0; i < 9; i++) { |
| c = l[i%3]; |
| str[9-i] = (mode & mask)?c:'-'; |
| mask = mask<<1; |
| } |
| |
| if(mode & S_ISUID) str[3] = (mode & S_IXUSR)?'s':'S'; |
| if(mode & S_ISGID) str[6] = (mode & S_IXGRP)?'s':'S'; |
| if(mode & S_ISVTX) str[9] = (mode & S_IXOTH)?'t':'T'; |
| str[10] = '\0'; |
| return str; |
| } |
| |
| static inline void dump_stat(struct stat *st, const char *name) |
| { |
| char str[20]; |
| char s[64], *p; |
| |
| if (st->st_mtime == (time_t)(-1)) /* some ctimes really hate -1 */ |
| st->st_mtime = 1; |
| |
| ctime_r(&st->st_mtime, s/*,64*/); /* newlib ctime doesn't have buflen */ |
| |
| if ((p = strchr(s,'\n')) != NULL) *p = '\0'; |
| if ((p = strchr(s,'\r')) != NULL) *p = '\0'; |
| |
| /* |
| printf("%6lo %s %8ld %s %s\n", st->st_mode, mkmodestr(st->st_mode, str), |
| st->st_size, s, name); |
| */ |
| |
| printf(" %s %8ld %s %s", mkmodestr(st->st_mode,str), st->st_size, s, name); |
| } |
| |
| static inline u32 dump_inode(struct b_lists * pL, struct jffs2_raw_dirent *d, struct jffs2_raw_inode *i) |
| { |
| char fname[256]; |
| struct stat st; |
| |
| if(!d || !i) return -1; |
| |
| strncpy(fname, d->name, d->nsize); |
| fname[d->nsize] = '\0'; |
| |
| memset(&st,0,sizeof(st)); |
| |
| st.st_mtime = i->mtime; |
| st.st_mode = i->mode; |
| st.st_ino = i->ino; |
| |
| /* neither dsize nor isize help us.. do it the long way */ |
| st.st_size = jffs2_1pass_read_inode(pL, i->ino, NULL); |
| |
| dump_stat(&st, fname); |
| |
| if (d->type == DT_LNK) { |
| unsigned char *src = (unsigned char *) (&i[1]); |
| putstr(" -> "); |
| putnstr(src, (int)i->dsize); |
| } |
| |
| putstr("\r\n"); |
| |
| return 0; |
| } |
| |
| /* list inodes with the given pino */ |
| static u32 |
| jffs2_1pass_list_inodes(struct b_lists * pL, u32 pino) |
| { |
| struct b_node *b; |
| struct jffs2_raw_dirent *jDir; |
| |
| for (b = pL->dir.listHead; b; b = b->next) { |
| jDir = (struct jffs2_raw_dirent *) (b->offset); |
| if ((pino == jDir->pino) && (jDir->ino)) { /* ino=0 -> unlink */ |
| u32 i_version = 0; |
| struct jffs2_raw_inode *jNode, *i = NULL; |
| struct b_node *b2 = pL->frag.listHead; |
| |
| while (b2) { |
| jNode = (struct jffs2_raw_inode *) (b2->offset); |
| if (jNode->ino == jDir->ino |
| && jNode->version >= i_version) |
| i = jNode; |
| b2 = b2->next; |
| } |
| |
| dump_inode(pL, jDir, i); |
| } |
| } |
| return pino; |
| } |
| |
| static u32 |
| jffs2_1pass_search_inode(struct b_lists * pL, const char *fname, u32 pino) |
| { |
| int i; |
| char tmp[256]; |
| char working_tmp[256]; |
| char *c; |
| |
| /* discard any leading slash */ |
| i = 0; |
| while (fname[i] == '/') |
| i++; |
| strcpy(tmp, &fname[i]); |
| |
| while ((c = (char *) strchr(tmp, '/'))) /* we are still dired searching */ |
| { |
| strncpy(working_tmp, tmp, c - tmp); |
| working_tmp[c - tmp] = '\0'; |
| #if 0 |
| putstr("search_inode: tmp = "); |
| putstr(tmp); |
| putstr("\r\n"); |
| putstr("search_inode: wtmp = "); |
| putstr(working_tmp); |
| putstr("\r\n"); |
| putstr("search_inode: c = "); |
| putstr(c); |
| putstr("\r\n"); |
| #endif |
| for (i = 0; i < strlen(c) - 1; i++) |
| tmp[i] = c[i + 1]; |
| tmp[i] = '\0'; |
| #if 0 |
| putstr("search_inode: post tmp = "); |
| putstr(tmp); |
| putstr("\r\n"); |
| #endif |
| |
| if (!(pino = jffs2_1pass_find_inode(pL, working_tmp, pino))) { |
| putstr("find_inode failed for name="); |
| putstr(working_tmp); |
| putstr("\r\n"); |
| return 0; |
| } |
| } |
| /* this is for the bare filename, directories have already been mapped */ |
| if (!(pino = jffs2_1pass_find_inode(pL, tmp, pino))) { |
| putstr("find_inode failed for name="); |
| putstr(tmp); |
| putstr("\r\n"); |
| return 0; |
| } |
| return pino; |
| |
| } |
| |
| static u32 |
| jffs2_1pass_resolve_inode(struct b_lists * pL, u32 ino) |
| { |
| struct b_node *b; |
| struct b_node *b2; |
| struct jffs2_raw_dirent *jDir; |
| struct jffs2_raw_inode *jNode; |
| struct jffs2_raw_dirent *jDirFound = NULL; |
| char tmp[256]; |
| u32 version = 0; |
| u32 pino; |
| unsigned char *src; |
| |
| /* we need to search all and return the inode with the highest version */ |
| for(b = pL->dir.listHead; b; b = b->next) { |
| jDir = (struct jffs2_raw_dirent *) (b->offset); |
| if (ino == jDir->ino) { |
| if (jDir->version < version) |
| continue; |
| |
| if (jDir->version == version && jDirFound) { |
| /* I'm pretty sure this isn't legal */ |
| putstr(" ** ERROR ** "); |
| putnstr(jDir->name, jDir->nsize); |
| putLabeledWord(" has dup version (resolve) = ", |
| version); |
| } |
| |
| jDirFound = jDir; |
| version = jDir->version; |
| } |
| } |
| /* now we found the right entry again. (shoulda returned inode*) */ |
| if (jDirFound->type != DT_LNK) |
| return jDirFound->ino; |
| |
| /* it's a soft link so we follow it again. */ |
| b2 = pL->frag.listHead; |
| while (b2) { |
| jNode = (struct jffs2_raw_inode *) (b2->offset); |
| if (jNode->ino == jDirFound->ino) { |
| src = (unsigned char *) (b2->offset + sizeof(struct jffs2_raw_inode)); |
| |
| #if 0 |
| putLabeledWord("\t\t dsize = ", jNode->dsize); |
| putstr("\t\t target = "); |
| putnstr(src, jNode->dsize); |
| putstr("\r\n"); |
| #endif |
| strncpy(tmp, src, jNode->dsize); |
| tmp[jNode->dsize] = '\0'; |
| break; |
| } |
| b2 = b2->next; |
| } |
| /* ok so the name of the new file to find is in tmp */ |
| /* if it starts with a slash it is root based else shared dirs */ |
| if (tmp[0] == '/') |
| pino = 1; |
| else |
| pino = jDirFound->pino; |
| |
| return jffs2_1pass_search_inode(pL, tmp, pino); |
| } |
| |
| static u32 |
| jffs2_1pass_search_list_inodes(struct b_lists * pL, const char *fname, u32 pino) |
| { |
| int i; |
| char tmp[256]; |
| char working_tmp[256]; |
| char *c; |
| |
| /* discard any leading slash */ |
| i = 0; |
| while (fname[i] == '/') |
| i++; |
| strcpy(tmp, &fname[i]); |
| working_tmp[0] = '\0'; |
| while ((c = (char *) strchr(tmp, '/'))) /* we are still dired searching */ |
| { |
| strncpy(working_tmp, tmp, c - tmp); |
| working_tmp[c - tmp] = '\0'; |
| for (i = 0; i < strlen(c) - 1; i++) |
| tmp[i] = c[i + 1]; |
| tmp[i] = '\0'; |
| /* only a failure if we arent looking at top level */ |
| if (!(pino = jffs2_1pass_find_inode(pL, working_tmp, pino)) && |
| (working_tmp[0])) { |
| putstr("find_inode failed for name="); |
| putstr(working_tmp); |
| putstr("\r\n"); |
| return 0; |
| } |
| } |
| |
| if (tmp[0] && !(pino = jffs2_1pass_find_inode(pL, tmp, pino))) { |
| putstr("find_inode failed for name="); |
| putstr(tmp); |
| putstr("\r\n"); |
| return 0; |
| } |
| /* this is for the bare filename, directories have already been mapped */ |
| if (!(pino = jffs2_1pass_list_inodes(pL, pino))) { |
| putstr("find_inode failed for name="); |
| putstr(tmp); |
| putstr("\r\n"); |
| return 0; |
| } |
| return pino; |
| |
| } |
| |
| unsigned char |
| jffs2_1pass_rescan_needed(struct part_info *part) |
| { |
| struct b_node *b; |
| struct jffs2_unknown_node *node; |
| struct b_lists *pL = (struct b_lists *)part->jffs2_priv; |
| |
| if (part->jffs2_priv == 0){ |
| DEBUGF ("rescan: First time in use\n"); |
| return 1; |
| } |
| /* if we have no list, we need to rescan */ |
| if (pL->frag.listCount == 0) { |
| DEBUGF ("rescan: fraglist zero\n"); |
| return 1; |
| } |
| |
| /* or if we are scanning a new partition */ |
| if (pL->partOffset != part->offset) { |
| DEBUGF ("rescan: different partition\n"); |
| return 1; |
| } |
| /* but suppose someone reflashed a partition at the same offset... */ |
| b = pL->dir.listHead; |
| while (b) { |
| node = (struct jffs2_unknown_node *) (b->offset); |
| if (node->nodetype != JFFS2_NODETYPE_DIRENT) { |
| DEBUGF ("rescan: fs changed beneath me? (%lx)\n", |
| (unsigned long) b->offset); |
| return 1; |
| } |
| b = b->next; |
| } |
| return 0; |
| } |
| |
| #ifdef DEBUG_FRAGMENTS |
| static void |
| dump_fragments(struct b_lists *pL) |
| { |
| struct b_node *b; |
| struct jffs2_raw_inode *jNode; |
| |
| putstr("\r\n\r\n******The fragment Entries******\r\n"); |
| b = pL->frag.listHead; |
| while (b) { |
| jNode = (struct jffs2_raw_inode *) (b->offset); |
| putLabeledWord("\r\n\tbuild_list: FLASH_OFFSET = ", b->offset); |
| putLabeledWord("\tbuild_list: totlen = ", jNode->totlen); |
| putLabeledWord("\tbuild_list: inode = ", jNode->ino); |
| putLabeledWord("\tbuild_list: version = ", jNode->version); |
| putLabeledWord("\tbuild_list: isize = ", jNode->isize); |
| putLabeledWord("\tbuild_list: atime = ", jNode->atime); |
| putLabeledWord("\tbuild_list: offset = ", jNode->offset); |
| putLabeledWord("\tbuild_list: csize = ", jNode->csize); |
| putLabeledWord("\tbuild_list: dsize = ", jNode->dsize); |
| putLabeledWord("\tbuild_list: compr = ", jNode->compr); |
| putLabeledWord("\tbuild_list: usercompr = ", jNode->usercompr); |
| putLabeledWord("\tbuild_list: flags = ", jNode->flags); |
| putLabeledWord("\tbuild_list: offset = ", b->offset); /* FIXME: ? [RS] */ |
| b = b->next; |
| } |
| } |
| #endif |
| |
| #ifdef DEBUG_DIRENTS |
| static void |
| dump_dirents(struct b_lists *pL) |
| { |
| struct b_node *b; |
| struct jffs2_raw_dirent *jDir; |
| |
| putstr("\r\n\r\n******The directory Entries******\r\n"); |
| b = pL->dir.listHead; |
| while (b) { |
| jDir = (struct jffs2_raw_dirent *) (b->offset); |
| putstr("\r\n"); |
| putnstr(jDir->name, jDir->nsize); |
| putLabeledWord("\r\n\tbuild_list: magic = ", jDir->magic); |
| putLabeledWord("\tbuild_list: nodetype = ", jDir->nodetype); |
| putLabeledWord("\tbuild_list: hdr_crc = ", jDir->hdr_crc); |
| putLabeledWord("\tbuild_list: pino = ", jDir->pino); |
| putLabeledWord("\tbuild_list: version = ", jDir->version); |
| putLabeledWord("\tbuild_list: ino = ", jDir->ino); |
| putLabeledWord("\tbuild_list: mctime = ", jDir->mctime); |
| putLabeledWord("\tbuild_list: nsize = ", jDir->nsize); |
| putLabeledWord("\tbuild_list: type = ", jDir->type); |
| putLabeledWord("\tbuild_list: node_crc = ", jDir->node_crc); |
| putLabeledWord("\tbuild_list: name_crc = ", jDir->name_crc); |
| putLabeledWord("\tbuild_list: offset = ", b->offset); /* FIXME: ? [RS] */ |
| b = b->next; |
| } |
| } |
| #endif |
| |
| static u32 |
| jffs2_1pass_build_lists(struct part_info * part) |
| { |
| struct b_lists *pL; |
| struct jffs2_unknown_node *node; |
| u32 offset, oldoffset = 0; |
| u32 max = part->size - sizeof(struct jffs2_raw_inode); |
| u32 counter = 0; |
| u32 counter4 = 0; |
| u32 counterF = 0; |
| u32 counterN = 0; |
| |
| /* turn off the lcd. Refreshing the lcd adds 50% overhead to the */ |
| /* jffs2 list building enterprise nope. in newer versions the overhead is */ |
| /* only about 5 %. not enough to inconvenience people for. */ |
| /* lcd_off(); */ |
| |
| /* if we are building a list we need to refresh the cache. */ |
| jffs_init_1pass_list(part); |
| pL = (struct b_lists *)part->jffs2_priv; |
| pL->partOffset = part->offset; |
| offset = 0; |
| printf("Scanning JFFS2 FS: "); |
| |
| /* start at the beginning of the partition */ |
| while (offset < max) { |
| if ((oldoffset >> SPIN_BLKSIZE) != (offset >> SPIN_BLKSIZE)) { |
| printf("\b\b%c ", spinner[counter++ % sizeof(spinner)]); |
| oldoffset = offset; |
| } |
| |
| node = (struct jffs2_unknown_node *) (part->offset + offset); |
| if (node->magic == JFFS2_MAGIC_BITMASK && hdr_crc(node)) { |
| /* if its a fragment add it */ |
| if (node->nodetype == JFFS2_NODETYPE_INODE && |
| inode_crc((struct jffs2_raw_inode *) node)) { |
| if (insert_node(&pL->frag, (u32) part->offset + |
| offset) == NULL) |
| return 0; |
| } else if (node->nodetype == JFFS2_NODETYPE_DIRENT && |
| dirent_crc((struct jffs2_raw_dirent *) node) && |
| dirent_name_crc((struct jffs2_raw_dirent *) node)) { |
| if (! (counterN%100)) |
| printf("\b\b. "); |
| if (insert_node(&pL->dir, (u32) part->offset + |
| offset) == NULL) |
| return 0; |
| counterN++; |
| } else if (node->nodetype == JFFS2_NODETYPE_CLEANMARKER) { |
| if (node->totlen != sizeof(struct jffs2_unknown_node)) |
| printf("OOPS Cleanmarker has bad size " |
| "%d != %d\n", node->totlen, |
| sizeof(struct jffs2_unknown_node)); |
| } else if (node->nodetype == JFFS2_NODETYPE_PADDING) { |
| if (node->totlen < sizeof(struct jffs2_unknown_node)) |
| printf("OOPS Padding has bad size " |
| "%d < %d\n", node->totlen, |
| sizeof(struct jffs2_unknown_node)); |
| } else { |
| printf("Unknown node type: %x len %d " |
| "offset 0x%x\n", node->nodetype, |
| node->totlen, offset); |
| } |
| offset += ((node->totlen + 3) & ~3); |
| counterF++; |
| } else if (node->magic == JFFS2_EMPTY_BITMASK && |
| node->nodetype == JFFS2_EMPTY_BITMASK) { |
| offset = jffs2_scan_empty(offset, part); |
| } else { /* if we know nothing, we just step and look. */ |
| offset += 4; |
| counter4++; |
| } |
| /* printf("unknown node magic %4.4x %4.4x @ %lx\n", node->magic, node->nodetype, (unsigned long)node); */ |
| |
| } |
| |
| putstr("\b\b done.\r\n"); /* close off the dots */ |
| /* turn the lcd back on. */ |
| /* splash(); */ |
| |
| #if 0 |
| putLabeledWord("dir entries = ", pL->dir.listCount); |
| putLabeledWord("frag entries = ", pL->frag.listCount); |
| putLabeledWord("+4 increments = ", counter4); |
| putLabeledWord("+file_offset increments = ", counterF); |
| |
| #endif |
| |
| #ifdef DEBUG_DIRENTS |
| dump_dirents(pL); |
| #endif |
| |
| #ifdef DEBUG_FRAGMENTS |
| dump_fragments(pL); |
| #endif |
| |
| /* give visual feedback that we are done scanning the flash */ |
| led_blink(0x0, 0x0, 0x1, 0x1); /* off, forever, on 100ms, off 100ms */ |
| return 1; |
| } |
| |
| |
| static u32 |
| jffs2_1pass_fill_info(struct b_lists * pL, struct b_jffs2_info * piL) |
| { |
| struct b_node *b; |
| struct jffs2_raw_inode *jNode; |
| int i; |
| |
| for (i = 0; i < JFFS2_NUM_COMPR; i++) { |
| piL->compr_info[i].num_frags = 0; |
| piL->compr_info[i].compr_sum = 0; |
| piL->compr_info[i].decompr_sum = 0; |
| } |
| |
| b = pL->frag.listHead; |
| while (b) { |
| jNode = (struct jffs2_raw_inode *) (b->offset); |
| if (jNode->compr < JFFS2_NUM_COMPR) { |
| piL->compr_info[jNode->compr].num_frags++; |
| piL->compr_info[jNode->compr].compr_sum += jNode->csize; |
| piL->compr_info[jNode->compr].decompr_sum += jNode->dsize; |
| } |
| b = b->next; |
| } |
| return 0; |
| } |
| |
| |
| static struct b_lists * |
| jffs2_get_list(struct part_info * part, const char *who) |
| { |
| if (jffs2_1pass_rescan_needed(part)) { |
| if (!jffs2_1pass_build_lists(part)) { |
| printf("%s: Failed to scan JFFSv2 file structure\n", who); |
| return NULL; |
| } |
| } |
| return (struct b_lists *)part->jffs2_priv; |
| } |
| |
| |
| /* Print directory / file contents */ |
| u32 |
| jffs2_1pass_ls(struct part_info * part, const char *fname) |
| { |
| struct b_lists *pl; |
| long ret = 0; |
| u32 inode; |
| |
| if (! (pl = jffs2_get_list(part, "ls"))) |
| return 0; |
| |
| if (! (inode = jffs2_1pass_search_list_inodes(pl, fname, 1))) { |
| putstr("ls: Failed to scan jffs2 file structure\r\n"); |
| return 0; |
| } |
| |
| |
| #if 0 |
| putLabeledWord("found file at inode = ", inode); |
| putLabeledWord("read_inode returns = ", ret); |
| #endif |
| |
| return ret; |
| } |
| |
| |
| /* Load a file from flash into memory. fname can be a full path */ |
| u32 |
| jffs2_1pass_load(char *dest, struct part_info * part, const char *fname) |
| { |
| |
| struct b_lists *pl; |
| long ret = 0; |
| u32 inode; |
| |
| if (! (pl = jffs2_get_list(part, "load"))) |
| return 0; |
| |
| if (! (inode = jffs2_1pass_search_inode(pl, fname, 1))) { |
| putstr("load: Failed to find inode\r\n"); |
| return 0; |
| } |
| |
| /* Resolve symlinks */ |
| if (! (inode = jffs2_1pass_resolve_inode(pl, inode))) { |
| putstr("load: Failed to resolve inode structure\r\n"); |
| return 0; |
| } |
| |
| if ((ret = jffs2_1pass_read_inode(pl, inode, dest)) < 0) { |
| putstr("load: Failed to read inode\r\n"); |
| return 0; |
| } |
| |
| DEBUGF ("load: loaded '%s' to 0x%lx (%ld bytes)\n", fname, |
| (unsigned long) dest, ret); |
| return ret; |
| } |
| |
| /* Return information about the fs on this partition */ |
| u32 |
| jffs2_1pass_info(struct part_info * part) |
| { |
| struct b_jffs2_info info; |
| struct b_lists *pl; |
| int i; |
| |
| if (! (pl = jffs2_get_list(part, "info"))) |
| return 0; |
| |
| jffs2_1pass_fill_info(pl, &info); |
| for (i = 0; i < JFFS2_NUM_COMPR; i++) { |
| printf("Compression: %s\n", compr_names[i]); |
| printf("\tfrag count: %d\n", info.compr_info[i].num_frags); |
| printf("\tcompressed sum: %d\n", info.compr_info[i].compr_sum); |
| printf("\tuncompressed sum: %d\n", info.compr_info[i].decompr_sum); |
| } |
| return 1; |
| } |
| |
| #endif /* CFG_CMD_JFFS2 */ |