| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * dts file for Xilinx Versal a2197 RevA System Controller |
| * |
| * (C) Copyright 2019 - 2021, Xilinx, Inc. |
| * |
| * Michal Simek <michal.simek@xilinx.com> |
| */ |
| /dts-v1/; |
| |
| #include "zynqmp.dtsi" |
| #include "zynqmp-clk-ccf.dtsi" |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/phy/phy.h> |
| |
| / { |
| model = "Versal System Controller on a2197 Eval board RevA"; /* VCK190/VMK180 */ |
| compatible = "xlnx,zynqmp-e-a2197-00-revA", "xlnx,zynqmp-a2197-revA", |
| "xlnx,zynqmp-a2197", "xlnx,zynqmp"; |
| |
| aliases { |
| ethernet0 = &gem0; |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| mmc0 = &sdhci1; |
| nvmem0 = &eeprom; |
| nvmem1 = &eeprom_ebm; |
| nvmem2 = &eeprom_fmc1; |
| nvmem3 = &eeprom_fmc2; |
| rtc0 = &rtc; |
| serial0 = &uart0; |
| serial1 = &dcc; |
| }; |
| |
| chosen { |
| bootargs = "earlycon"; |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| memory@0 { |
| device_type = "memory"; |
| reg = <0x0 0x0 0x0 0x80000000>; |
| }; |
| |
| ina226-vccint { |
| compatible = "iio-hwmon"; |
| io-channels = <&vccint 0>, <&vccint 1>, <&vccint 2>, <&vccint 3>; |
| }; |
| ina226-vcc-soc { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_soc 0>, <&vcc_soc 1>, <&vcc_soc 2>, <&vcc_soc 3>; |
| }; |
| ina226-vcc-pmc { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_pmc 0>, <&vcc_pmc 1>, <&vcc_pmc 2>, <&vcc_pmc 3>; |
| }; |
| ina226-vcc-ram { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_ram 0>, <&vcc_ram 1>, <&vcc_ram 2>, <&vcc_ram 3>; |
| }; |
| ina226-vcc-pslp { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_pslp 0>, <&vcc_pslp 1>, <&vcc_pslp 2>, <&vcc_pslp 3>; |
| }; |
| ina226-vcc-psfp { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_psfp 0>, <&vcc_psfp 1>, <&vcc_psfp 2>, <&vcc_psfp 3>; |
| }; |
| ina226-vccaux { |
| compatible = "iio-hwmon"; |
| io-channels = <&vccaux 0>, <&vccaux 1>, <&vccaux 2>, <&vccaux 3>; |
| }; |
| ina226-vccaux-pmc { |
| compatible = "iio-hwmon"; |
| io-channels = <&vccaux_pmc 0>, <&vccaux_pmc 1>, <&vccaux_pmc 2>, <&vccaux_pmc 3>; |
| }; |
| ina226-vcco-500 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcco_500 0>, <&vcco_500 1>, <&vcco_500 2>, <&vcco_500 3>; |
| }; |
| ina226-vcco-501 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcco_501 0>, <&vcco_501 1>, <&vcco_501 2>, <&vcco_501 3>; |
| }; |
| ina226-vcco-502 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcco_502 0>, <&vcco_502 1>, <&vcco_502 2>, <&vcco_502 3>; |
| }; |
| ina226-vcco-503 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcco_503 0>, <&vcco_503 1>, <&vcco_503 2>, <&vcco_503 3>; |
| }; |
| ina226-vcc-1v8 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_1v8 0>, <&vcc_1v8 1>, <&vcc_1v8 2>, <&vcc_1v8 3>; |
| }; |
| ina226-vcc-3v3 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_3v3 0>, <&vcc_3v3 1>, <&vcc_3v3 2>, <&vcc_3v3 3>; |
| }; |
| ina226-vcc-1v2-ddr4 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc_1v2_ddr4 0>, <&vcc_1v2_ddr4 1>, <&vcc_1v2_ddr4 2>, <&vcc_1v2_ddr4 3>; |
| }; |
| ina226-vcc-1v1-lp4 { |
| compatible = "iio-hwmon"; |
| io-channels = <&vcc1v1_lp4 0>, <&vcc1v1_lp4 1>, <&vcc1v1_lp4 2>, <&vcc1v1_lp4 3>; |
| }; |
| ina226-vadj-fmc { |
| compatible = "iio-hwmon"; |
| io-channels = <&vadj_fmc 0>, <&vadj_fmc 1>, <&vadj_fmc 2>, <&vadj_fmc 3>; |
| }; |
| ina226-mgtyavcc { |
| compatible = "iio-hwmon"; |
| io-channels = <&mgtyavcc 0>, <&mgtyavcc 1>, <&mgtyavcc 2>, <&mgtyavcc 3>; |
| }; |
| ina226-mgtyavtt { |
| compatible = "iio-hwmon"; |
| io-channels = <&mgtyavtt 0>, <&mgtyavtt 1>, <&mgtyavtt 2>, <&mgtyavtt 3>; |
| }; |
| ina226-mgtyvccaux { |
| compatible = "iio-hwmon"; |
| io-channels = <&mgtyvccaux 0>, <&mgtyvccaux 1>, <&mgtyvccaux 2>, <&mgtyvccaux 3>; |
| }; |
| }; |
| |
| &uart0 { /* uart0 MIO38-39 */ |
| status = "okay"; |
| }; |
| |
| &sdhci1 { /* sd1 MIO45-51 cd in place */ |
| status = "okay"; |
| no-1-8-v; |
| disable-wp; |
| xlnx,mio-bank = <1>; |
| }; |
| |
| &gem0 { |
| status = "okay"; |
| phy-handle = <&phy0>; |
| phy-mode = "sgmii"; |
| is-internal-pcspma; |
| phy0: ethernet-phy@0 { /* u131 M88E1512 */ |
| reg = <0>; |
| }; |
| }; |
| |
| &gpio { |
| status = "okay"; |
| gpio-line-names = "", "", "", "", "", /* 0 - 4 */ |
| "", "", "DC_SYS_CTRL0", "DC_SYS_CTRL1", "DC_SYS_CTRL2", /* 5 - 9 */ |
| "DC_SYS_CTRL3", "ZU4_TRIGGER", "SYSCTLR_PB", "", "", /* 10 - 14 */ |
| "", "", "", "", "", /* 15 - 19 */ |
| "", "", "", "", "", /* 20 - 24 */ |
| "", "", "", "", "", /* 25 - 29 */ |
| "", "", "", "", "LP_I2C0_PMC_SCL", /* 30 - 34 */ |
| "LP_I2C0_PMC_SDA", "LP_I2C1_SCL", "LP_I2C1_SDA", "UART0_RXD_IN", "UART0_TXD_OUT", /* 35 - 39 */ |
| "", "", "ETH_RESET_B", "", "", /* 40 - 44 */ |
| "SD1_CD_B", "SD1_DATA0", "SD1_DATA1", "SD1_DATA2", "SD1_DATA3", /* 45 - 49 */ |
| "SD1_CMD", "SD1_CLK", "", "", "", /* 50 - 54 */ |
| "", "", "", "", "", /* 55 - 59 */ |
| "", "", "", "", "", /* 60 - 64 */ |
| "", "", "", "", "", /* 65 - 69 */ |
| "", "", "", "", "", /* 70 - 74 */ |
| "", "ETH_MDC", "ETH_MDIO", /* 75 - 77, MIO end and EMIO start */ |
| "SYSCTLR_VERSAL_MODE0", "SYSCTLR_VERSAL_MODE1", /* 78 - 79 */ |
| "SYSCTLR_VERSAL_MODE2", "SYSCTLR_VERSAL_MODE3", "SYSCTLR_POR_B_LS", "DC_PRSNT", "", /* 80 - 84 */ |
| "SYSCTLR_JTAG_S0", "SYSCTLR_JTAG_S1", "SYSCTLR_IIC_MUX0_RESET_B", "SYSCTLR_IIC_MUX1_RESET_B", "", /* 85 - 89 */ |
| "SYSCTLR_GPIO0", "SYSCTLR_GPIO1", "SYSCTLR_GPIO2", "SYSCTLR_GPIO3", "SYSCTLR_GPIO4", /* 90 - 94 */ |
| "SYSCTLR_GPIO5", "", "", "", "", /* 95 - 99 */ |
| "", "", "", "", "", /* 100 - 104 */ |
| "", "", "", "", "", /* 105 - 109 */ |
| "", "", "", "", "", /* 110 - 114 */ |
| "", "", "", "", "", /* 115 - 119 */ |
| "", "", "", "", "", /* 120 - 124 */ |
| "", "", "", "", "", /* 125 - 129 */ |
| "PMBUS1_INA226_ALERT", "PMBUS2_INA226_ALERT", "", "", "", /* 130 - 134 */ |
| "", "", "", "", "", /* 135 - 139 */ |
| "PMBUS_ALERT", "", "SYSCTLR_ETH_RESET_B", "SYSCTLR_VCC0V85_TG", "MAX6643_OT_B", /* 140 - 144 */ |
| "MAX6643_FANFINAL_B", "MAX6643_FULLSPD", "", "", "", /* 145 - 149 */ |
| "", "", "", "", "", /* 150 - 154 */ |
| "", "", "", "", "", /* 155 - 159 */ |
| "", "", "", "", "", /* 160 - 164 */ |
| "", "", "", "", "", /* 165 - 169 */ |
| "", "", "", ""; /* 170 - 174 */ |
| }; |
| |
| &i2c0 { /* MIO 34-35 - can't stay here */ |
| status = "okay"; |
| clock-frequency = <400000>; |
| i2c-mux@74 { /* u33 */ |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x74>; |
| /* reset-gpios = <&gpio SYSCTLR_IIC_MUX0_RESET_B GPIO_ACTIVE_HIGH>; */ |
| i2c@0 { /* PMBUS */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| /* u152 IR35215 0x16/0x46 vcc_soc */ |
| /* u179 ir38164 0x19/0x49 vcco_500 */ |
| /* u181 ir38164 0x1a/0x4a vcco_501 */ |
| /* u183 ir38164 0x1b/0x4b vcco_502 */ |
| /* u185 ir38164 0x1e/0x4e vadj_fmc */ |
| /* u187 ir38164 0x1F/0x4f mgtyavcc */ |
| /* u189 ir38164 0x20/0x50 mgtyavtt */ |
| /* u194 ir38164 0x13/0x43 vdd1_1v8_lp4 */ |
| /* u195 ir38164 0x14/0x44 vdd2_1v8_lp4 */ |
| |
| irps5401_47: irps5401@47 { /* IRPS5401 - u160 */ |
| compatible = "infineon,irps5401"; |
| reg = <0x47>; /* pmbus / i2c 0x17 */ |
| }; |
| irps5401_4c: irps5401@4c { /* IRPS5401 - u167 */ |
| compatible = "infineon,irps5401"; |
| reg = <0x4c>; /* pmbus / i2c 0x1c */ |
| }; |
| irps5401_4d: irps5401@4d { /* IRPS5401 - u175 */ |
| compatible = "infineon,irps5401"; |
| reg = <0x4d>; /* pmbus / i2c 0x1d */ |
| }; |
| }; |
| i2c@1 { /* PMBUS1_INA226 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| /* FIXME check alerts coming to SC */ |
| vccint: ina226@40 { /* u65 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vccint"; |
| reg = <0x40>; |
| shunt-resistor = <500>; /* R440 */ |
| /* 0.80V @ 32A 1 of 6 Phases*/ |
| }; |
| vcc_soc: ina226@41 { /* u161 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-soc"; |
| reg = <0x41>; |
| shunt-resistor = <500>; /* R1702 */ |
| /* 0.80V @ 18A */ |
| }; |
| vcc_pmc: ina226@42 { /* u163 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-pmc"; |
| reg = <0x42>; |
| shunt-resistor = <5000>; /* R1214 */ |
| /* 0.78V @ 500mA */ |
| }; |
| vcc_ram: ina226@43 { /* u162 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-ram"; |
| reg = <0x43>; |
| shunt-resistor = <5000>; /* r1221 */ |
| /* 0.78V @ 4A */ |
| }; |
| vcc_pslp: ina226@44 { /* u165 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-pslp"; |
| reg = <0x44>; |
| shunt-resistor = <5000>; /* R1216 */ |
| /* 0.78V @ 1A */ |
| }; |
| vcc_psfp: ina226@45 { /* u164 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-psfp"; |
| reg = <0x45>; |
| shunt-resistor = <5000>; /* R1219 */ |
| /* 0.78V @ 2A */ |
| }; |
| }; |
| i2c@2 { /* PCIE_CLK */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| clock_8t49n287: clock-generator@d8 { /* u39 8T49N240 */ |
| #clock-cells = <1>; /* author David Cater <david.cater@idt.com>*/ |
| compatible = "idt,8t49n240", "idt,8t49n241"; /* FIXME no driver for 240 */ |
| reg = <0xd8>; |
| /* Documentation/devicetree/bindings/clock/idt,idt8t49n24x.txt */ |
| /* FIXME there input via J241 Samtec CLK1 and CLK0 from U38 - selection PIN */ |
| }; |
| }; |
| i2c@3 { /* PMBUS2_INA226 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| /* FIXME check alerts coming to SC */ |
| vccaux: ina226@40 { /* u166 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vccaux"; |
| reg = <0x40>; |
| shunt-resistor = <5000>; /* R382 */ |
| /* 1.5V @ 3A */ |
| }; |
| vccaux_pmc: ina226@41 { /* u168 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vccaux-pmc"; |
| reg = <0x41>; |
| shunt-resistor = <5000>; /* R1246 */ |
| /* 1.5V @ 500mA */ |
| }; |
| vcco_500: ina226@42 { /* u178 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcco-500"; |
| reg = <0x42>; |
| shunt-resistor = <2000>; /* R1300 */ |
| /* 3.3V @ 5A */ |
| }; |
| vcco_501: ina226@43 { /* u180 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcco-501"; |
| reg = <0x43>; |
| shunt-resistor = <2000>; /* R1313 */ |
| /* 3.3V @ 5A */ |
| }; |
| vcco_502: ina226@44 { /* u182 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcco-502"; |
| reg = <0x44>; |
| shunt-resistor = <2000>; /* R1330 */ |
| /* 3.3V @ 5A */ |
| }; |
| vcco_503: ina226@45 { /* u172 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcco-503"; |
| reg = <0x45>; |
| shunt-resistor = <5000>; /* R1229 */ |
| /* 1.8V @ 2A */ |
| }; |
| vcc_1v8: ina226@46 { /* u173 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-1v8"; |
| reg = <0x46>; |
| shunt-resistor = <5000>; /* R400 */ |
| /* 1.8V @ 6A */ |
| }; |
| vcc_3v3: ina226@47 { /* u174 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-3v3"; |
| reg = <0x47>; |
| shunt-resistor = <5000>; /* R1232 */ |
| /* 3.3V @ 500mA */ |
| }; |
| vcc_1v2_ddr4: ina226@48 { /* u176 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc-1v2-ddr4"; |
| reg = <0x48>; |
| shunt-resistor = <5000>; /* R1275 */ |
| /* 1.2V @ 4A */ |
| }; |
| vcc1v1_lp4: ina226@49 { /* u177 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vcc1v1-lp4"; |
| reg = <0x49>; |
| shunt-resistor = <5000>; /* R1286 */ |
| /* 1.1V @ 4A */ |
| }; |
| vadj_fmc: ina226@4a { /* u184 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-vadj-fmc"; |
| reg = <0x4a>; |
| shunt-resistor = <2000>; /* R1350 */ |
| /* 1.5V @ 10A */ |
| }; |
| mgtyavcc: ina226@4b { /* u186 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-mgtyavcc"; |
| reg = <0x4b>; |
| shunt-resistor = <2000>; /* R1367 */ |
| /* 0.88V @ 6A */ |
| }; |
| mgtyavtt: ina226@4c { /* u188 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-mgtyavtt"; |
| reg = <0x4c>; |
| shunt-resistor = <2000>; /* R1384 */ |
| /* 1.2V @ 10A */ |
| }; |
| mgtyvccaux: ina226@4d { /* u234 */ |
| compatible = "ti,ina226"; |
| #io-channel-cells = <1>; |
| label = "ina226-mgtyvccaux"; |
| reg = <0x4d>; |
| shunt-resistor = <5000>; /* r1679 */ |
| /* 1.5V @ 500mA */ |
| }; |
| }; |
| i2c@4 { /* LP_I2C_SM */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| /* FIXME wires ready but chip is missing */ |
| }; |
| i2c@5 { /* zSFP_SI570 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <5>; |
| si570_zsfp: clock-generator@5d { /* u192 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x5d>; |
| temperature-stability = <50>; |
| factory-fout = <156250000>; |
| clock-frequency = <156250000>; |
| clock-output-names = "si570_zsfp_clk"; |
| }; |
| }; |
| i2c@6 { /* USER_SI570_1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <6>; |
| si570_user1: clock-generator@5d { /* u205 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x5f>; |
| temperature-stability = <50>; |
| factory-fout = <100000000>; |
| clock-frequency = <100000000>; |
| clock-output-names = "si570_user1"; |
| }; |
| |
| }; |
| i2c@7 { /* USER_SI570_2 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <7>; |
| /* FIXME wires ready but chip is missing */ |
| }; |
| }; |
| }; |
| |
| &i2c1 { /* i2c1 MIO 36-37 */ |
| status = "okay"; |
| clock-frequency = <400000>; |
| |
| i2c-mux@74 { /* u35 */ |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x74>; |
| i2c-mux-idle-disconnect; |
| /* reset-gpios = <&gpio SYSCTLR_IIC_MUX1_RESET_B GPIO_ACTIVE_HIGH>; */ |
| dc_i2c: i2c@0 { /* DC_I2C */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| /* Use for storing information about SC board */ |
| eeprom: eeprom@54 { /* u34 - m24128 16kB */ |
| compatible = "st,24c128", "atmel,24c128"; |
| reg = <0x54>; /* 0x5c too */ |
| }; |
| si570_ref_clk: clock-generator@5d { /* u32 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x5d>; |
| temperature-stability = <50>; |
| factory-fout = <33333333>; |
| clock-frequency = <33333333>; |
| clock-output-names = "ref_clk"; |
| silabs,skip-recall; |
| }; |
| /* and connector J212D */ |
| eeprom_ebm: eeprom@52 { /* x-ebm module */ |
| compatible = "st,24c128", "atmel,24c128"; |
| reg = <0x52>; |
| }; |
| }; |
| fmc1: i2c@1 { /* FMCP1_IIC */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| /* FIXME connection to Samtec J51C */ |
| /* expected eeprom 0x50 FMC cards */ |
| eeprom_fmc1: eeprom@50 { |
| compatible = "st,24c128", "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| }; |
| fmc2: i2c@2 { /* FMCP2_IIC */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| /* FIXME connection to Samtec J53C */ |
| /* expected eeprom 0x50 FMC cards */ |
| eeprom_fmc2: eeprom@50 { |
| compatible = "st,24c128", "atmel,24c128"; |
| reg = <0x50>; |
| }; |
| }; |
| i2c@3 { /* DDR4_DIMM1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <3>; |
| si570_ddr_dimm1: clock-generator@60 { /* u2 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x60>; |
| temperature-stability = <50>; |
| factory-fout = <200000000>; |
| clock-frequency = <200000000>; |
| clock-output-names = "si570_ddrdimm1_clk"; |
| silabs,skip-recall; |
| }; |
| }; |
| i2c@4 { /* LPDDR4_SI570_CLK2 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <4>; |
| si570_lpddr4clk2: clock-generator@60 { /* u3 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x60>; |
| temperature-stability = <50>; |
| factory-fout = <200000000>; |
| clock-frequency = <200000000>; |
| clock-output-names = "si570_lpddr4_clk2"; |
| }; |
| }; |
| i2c@5 { /* LPDDR4_SI570_CLK1 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <5>; |
| si570_lpddr4clk1: clock-generator@60 { /* u4 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x60>; |
| temperature-stability = <50>; |
| factory-fout = <200000000>; |
| clock-frequency = <200000000>; |
| clock-output-names = "si570_lpddr4_clk1"; |
| }; |
| }; |
| i2c@6 { /* HSDP_SI570 */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <6>; |
| si570_hsdp: clock-generator@5d { /* u5 */ |
| #clock-cells = <0>; |
| compatible = "silabs,si570"; |
| reg = <0x5d>; |
| temperature-stability = <50>; |
| factory-fout = <156250000>; |
| clock-frequency = <156250000>; |
| clock-output-names = "si570_hsdp_clk"; |
| }; |
| }; |
| i2c@7 { /* 8A34001 - U219B and J310 connector */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <7>; |
| }; |
| }; |
| i2c-mux@75 { /* u214 */ |
| compatible = "nxp,pca9548"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x75>; |
| i2c-mux-idle-disconnect; |
| i2c@0 { /* SFP0_IIC */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0>; |
| /* SFP0 */ |
| }; |
| i2c@1 { /* SFP1_IIC */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <1>; |
| /* SFP1 */ |
| }; |
| i2c@2 { /* QSFP1_I2C */ |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <2>; |
| /* QSFP1 */ |
| }; |
| /* 3 - 7 unused */ |
| }; |
| }; |
| |
| &xilinx_ams { |
| status = "okay"; |
| }; |
| |
| &ams_ps { |
| status = "okay"; |
| }; |
| |
| &ams_pl { |
| status = "okay"; |
| }; |