| /* |
| * Configuation settings for the Hitachi Solution Engine 7720 |
| * |
| * Copyright (C) 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __MS7720SE_H |
| #define __MS7720SE_H |
| |
| #define CONFIG_CPU_SH7720 1 |
| #define CONFIG_MS7720SE 1 |
| |
| #define CONFIG_BOOTFILE "/boot/zImage" |
| #define CONFIG_LOADADDR 0x8E000000 |
| |
| #define CONFIG_DISPLAY_BOARDINFO |
| #undef CONFIG_SHOW_BOOT_PROGRESS |
| |
| /* MEMORY */ |
| #define MS7720SE_SDRAM_BASE 0x8C000000 |
| #define MS7720SE_FLASH_BASE_1 0xA0000000 |
| #define MS7720SE_FLASH_BANK_SIZE (8 * 1024 * 1024) |
| |
| #define CONFIG_SYS_TEXT_BASE 0x8FFC0000 |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_CBSIZE 256 /* Buffer size for input from the Console */ |
| #define CONFIG_SYS_PBSIZE 256 /* Buffer size for Console output */ |
| #define CONFIG_SYS_MAXARGS 16 /* max args accepted for monitor commands */ |
| /* Buffer size for Boot Arguments passed to kernel */ |
| #define CONFIG_SYS_BARGSIZE 512 |
| /* List of legal baudrate settings for this board */ |
| #define CONFIG_SYS_BAUDRATE_TABLE { 115200 } |
| |
| /* SCIF */ |
| #define CONFIG_CONS_SCIF0 1 |
| |
| #define CONFIG_SYS_MEMTEST_START MS7720SE_SDRAM_BASE |
| #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024)) |
| |
| #define CONFIG_SYS_SDRAM_BASE MS7720SE_SDRAM_BASE |
| #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) |
| |
| #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024) |
| #define CONFIG_SYS_MONITOR_BASE MS7720SE_FLASH_BASE_1 |
| #define CONFIG_SYS_MONITOR_LEN (128 * 1024) |
| #define CONFIG_SYS_MALLOC_LEN (256 * 1024) |
| #define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024) |
| |
| /* FLASH */ |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER |
| #undef CONFIG_SYS_FLASH_QUIET_TEST |
| #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ |
| |
| #define CONFIG_SYS_FLASH_BASE MS7720SE_FLASH_BASE_1 |
| |
| #define CONFIG_SYS_MAX_FLASH_SECT 150 |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } |
| |
| #define CONFIG_ENV_SECT_SIZE (64 * 1024) |
| #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 |
| |
| /* Board Clock */ |
| #define CONFIG_SYS_CLK_FREQ 33333333 |
| #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ |
| #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ |
| #define CONFIG_SYS_TMU_CLK_DIV 4 /* 4 (default), 16, 64, 256 or 1024 */ |
| |
| /* PCMCIA */ |
| #define CONFIG_IDE_PCMCIA 1 |
| #define CONFIG_MARUBUN_PCCARD 1 |
| #define CONFIG_PCMCIA_SLOT_A 1 |
| #define CONFIG_SYS_IDE_MAXDEVICE 1 |
| #define CONFIG_SYS_MARUBUN_MRSHPC 0xb83fffe0 |
| #define CONFIG_SYS_MARUBUN_MW1 0xb8400000 |
| #define CONFIG_SYS_MARUBUN_MW2 0xb8500000 |
| #define CONFIG_SYS_MARUBUN_IO 0xb8600000 |
| |
| #define CONFIG_SYS_PIO_MODE 1 |
| #define CONFIG_SYS_IDE_MAXBUS 1 |
| #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_MARUBUN_IO /* base address */ |
| #define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */ |
| #define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */ |
| #define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */ |
| #define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */ |
| #define CONFIG_IDE_SWAP_IO |
| |
| #endif /* __MS7720SE_H */ |