| /* |
| * ti816x_evm.h |
| * |
| * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com> |
| * Antoine Tenart, <atenart@adeneo-embedded.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_TI816X_EVM_H |
| #define __CONFIG_TI816X_EVM_H |
| |
| #include <configs/ti_armv7_omap.h> |
| #include <asm/arch/omap.h> |
| |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_MACH_TYPE MACH_TYPE_TI8168EVM |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| DEFAULT_LINUX_BOOT_ENV \ |
| "mtdids=" MTDIDS_DEFAULT "\0" \ |
| "mtdparts=" MTDPARTS_DEFAULT "\0" \ |
| |
| #define CONFIG_BOOTCOMMAND \ |
| "mmc rescan;" \ |
| "fatload mmc 0 ${loadaddr} uImage;" \ |
| "bootm ${loadaddr}" \ |
| |
| /* Clock Defines */ |
| #define V_OSCK 24000000 /* Clock output from T2 */ |
| #define V_SCLK (V_OSCK >> 1) |
| |
| #define CONFIG_CMD_ASKENV |
| |
| #define CONFIG_MAX_RAM_BANK_SIZE (2048 << 20) /* 2048MB */ |
| #define CONFIG_SYS_SDRAM_BASE 0x80000000 |
| |
| /** |
| * Platform/Board specific defs |
| */ |
| #define CONFIG_SYS_CLK_FREQ 27000000 |
| #define CONFIG_SYS_TIMERBASE 0x4802E000 |
| #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ |
| |
| /* |
| * NS16550 Configuration |
| */ |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_REG_SIZE (-4) |
| #define CONFIG_SYS_NS16550_CLK (48000000) |
| #define CONFIG_SYS_NS16550_COM1 0x48024000 /* Base EVM has UART2 */ |
| |
| /* allow overwriting serial config and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_SERIAL1 |
| #define CONFIG_SERIAL2 |
| #define CONFIG_SERIAL3 |
| #define CONFIG_CONS_INDEX 1 |
| |
| /* |
| * GPMC NAND block. We support 1 device and the physical address to |
| * access CS0 at is 0x8000000. |
| */ |
| #define CONFIG_SYS_NAND_BASE 0x8000000 |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| |
| /* NAND: SPL related configs */ |
| #define CONFIG_SPL_NAND_AM33XX_BCH |
| |
| /* NAND: device related configs */ |
| #define CONFIG_SYS_NAND_5_ADDR_CYCLE |
| #define CONFIG_SYS_NAND_BUSWIDTH_16BIT |
| #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ |
| CONFIG_SYS_NAND_PAGE_SIZE) |
| #define CONFIG_SYS_NAND_PAGE_SIZE 2048 |
| #define CONFIG_SYS_NAND_OOBSIZE 64 |
| #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) |
| /* NAND: driver related configs */ |
| #define CONFIG_NAND_OMAP_GPMC_PREFETCH |
| #define CONFIG_NAND_OMAP_ELM |
| #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS |
| #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ |
| 10, 11, 12, 13, 14, 15, 16, 17, \ |
| 18, 19, 20, 21, 22, 23, 24, 25, \ |
| 26, 27, 28, 29, 30, 31, 32, 33, \ |
| 34, 35, 36, 37, 38, 39, 40, 41, \ |
| 42, 43, 44, 45, 46, 47, 48, 49, \ |
| 50, 51, 52, 53, 54, 55, 56, 57, } |
| |
| #define CONFIG_SYS_NAND_ECCSIZE 512 |
| #define CONFIG_SYS_NAND_ECCBYTES 14 |
| #define CONFIG_SYS_NAND_ONFI_DETECTION |
| #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW |
| #define MTDIDS_DEFAULT "nand0=nand.0" |
| #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ |
| "128k(NAND.SPL)," \ |
| "128k(NAND.SPL.backup1)," \ |
| "128k(NAND.SPL.backup2)," \ |
| "128k(NAND.SPL.backup3)," \ |
| "256k(NAND.u-boot-spl-os)," \ |
| "1m(NAND.u-boot)," \ |
| "128k(NAND.u-boot-env)," \ |
| "128k(NAND.u-boot-env.backup1)," \ |
| "8m(NAND.kernel)," \ |
| "-(NAND.file-system)" |
| #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x000c0000 |
| #define CONFIG_ENV_OFFSET 0x001c0000 |
| #define CONFIG_ENV_OFFSET_REDUND 0x001e0000 |
| #define CONFIG_SYS_ENV_SECT_SIZE CONFIG_SYS_NAND_BLOCK_SIZE |
| |
| /* SPL */ |
| /* Defines for SPL */ |
| #define CONFIG_SPL_NAND_AM33XX_BCH /* ELM support */ |
| #define CONFIG_SPL_TEXT_BASE 0x40400000 |
| #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \ |
| CONFIG_SPL_TEXT_BASE) |
| |
| #define CONFIG_SYS_TEXT_BASE 0x80800000 |
| |
| #define CONFIG_DRIVER_TI_EMAC |
| #define CONFIG_MII |
| #define CONFIG_BOOTP_DNS |
| #define CONFIG_BOOTP_DNS2 |
| #define CONFIG_BOOTP_SEND_HOSTNAME |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_SUBNETMASK |
| #define CONFIG_NET_RETRY_COUNT 10 |
| |
| /* Since SPL did pll and ddr initialization for us, |
| * we don't need to do it twice. |
| */ |
| #ifndef CONFIG_SPL_BUILD |
| #define CONFIG_SKIP_LOWLEVEL_INIT |
| #endif |
| |
| /* |
| * Disable MMC DM for SPL build and can be re-enabled after adding |
| * DM support in SPL |
| */ |
| #ifdef CONFIG_SPL_BUILD |
| #undef CONFIG_DM_MMC |
| #undef CONFIG_TIMER |
| #undef CONFIG_DM_USB |
| #endif |
| #endif |