| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright 2020-2021 Toradex |
| */ |
| |
| #include <common.h> |
| #include <init.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/global_data.h> |
| #include <asm/io.h> |
| #include <hang.h> |
| #include <i2c.h> |
| #include <micrel.h> |
| #include <miiphy.h> |
| #include <netdev.h> |
| |
| #include "../common/tdx-cfg-block.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define I2C_PMIC 0 |
| |
| enum pcb_rev_t { |
| PCB_VERSION_1_0, |
| PCB_VERSION_1_1 |
| }; |
| |
| #if IS_ENABLED(CONFIG_FEC_MXC) |
| static int setup_fec(void) |
| { |
| struct iomuxc_gpr_base_regs *gpr = |
| (struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR; |
| |
| /* Use 125M anatop REF_CLK1 for ENET1, not from external */ |
| clrsetbits_le32(&gpr->gpr[1], 0x2000, 0); |
| |
| return 0; |
| } |
| #endif |
| |
| int board_init(void) |
| { |
| if (IS_ENABLED(CONFIG_FEC_MXC)) |
| setup_fec(); |
| |
| return 0; |
| } |
| |
| int board_mmc_get_env_dev(int devno) |
| { |
| return devno; |
| } |
| |
| static enum pcb_rev_t get_pcb_revision(void) |
| { |
| struct udevice *bus; |
| struct udevice *i2c_dev = NULL; |
| int ret; |
| u8 is_bd71837 = 0; |
| |
| ret = uclass_get_device_by_seq(UCLASS_I2C, I2C_PMIC, &bus); |
| if (!ret) |
| ret = dm_i2c_probe(bus, 0x4b, 0, &i2c_dev); |
| if (!ret) |
| ret = dm_i2c_read(i2c_dev, 0x0, &is_bd71837, 1); |
| |
| /* BD71837_REV, High Nibble is major version, fix 1010 */ |
| is_bd71837 = !ret && ((is_bd71837 & 0xf0) == 0xa0); |
| return is_bd71837 ? PCB_VERSION_1_0 : PCB_VERSION_1_1; |
| } |
| |
| static void select_dt_from_module_version(void) |
| { |
| char variant[32]; |
| char *env_variant = env_get("variant"); |
| int is_wifi = 0; |
| |
| if (IS_ENABLED(CONFIG_TDX_CFG_BLOCK)) { |
| /* |
| * If we have a valid config block and it says we are a |
| * module with Wi-Fi/Bluetooth make sure we use the -wifi |
| * device tree. |
| */ |
| is_wifi = (tdx_hw_tag.prodid == VERDIN_IMX8MMQ_WIFI_BT_IT) || |
| (tdx_hw_tag.prodid == VERDIN_IMX8MMDL_WIFI_BT_IT) || |
| (tdx_hw_tag.prodid == VERDIN_IMX8MMQ_WIFI_BT_IT_NO_CAN); |
| } |
| |
| switch (get_pcb_revision()) { |
| case PCB_VERSION_1_0: |
| printf("Detected a V1.0 module which is no longer supported in this BSP version\n"); |
| hang(); |
| default: |
| if (is_wifi) |
| strlcpy(&variant[0], "wifi", sizeof(variant)); |
| else |
| strlcpy(&variant[0], "nonwifi", sizeof(variant)); |
| break; |
| } |
| |
| if (strcmp(variant, env_variant)) { |
| printf("Setting variant to %s\n", variant); |
| env_set("variant", variant); |
| } |
| } |
| |
| int board_late_init(void) |
| { |
| select_dt_from_module_version(); |
| |
| return 0; |
| } |
| |
| int board_phys_sdram_size(phys_size_t *size) |
| { |
| if (!size) |
| return -EINVAL; |
| |
| *size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) |
| int ft_board_setup(void *blob, struct bd_info *bd) |
| { |
| return 0; |
| } |
| #endif |