| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * DTS File for HiSilicon Hi3798cv200 SoC. |
| * |
| * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd. |
| */ |
| |
| #include <dt-bindings/clock/histb-clock.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/reset/ti-syscon.h> |
| |
| / { |
| compatible = "hisilicon,hi3798cv200"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| }; |
| |
| cpu@1 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| }; |
| |
| cpu@2 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| }; |
| |
| cpu@3 { |
| compatible = "arm,cortex-a53"; |
| device_type = "cpu"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| }; |
| }; |
| |
| gic: interrupt-controller@f1001000 { |
| compatible = "arm,gic-400"; |
| reg = <0x0 0xf1001000 0x0 0x1000>, /* GICD */ |
| <0x0 0xf1002000 0x0 0x100>; /* GICC */ |
| #address-cells = <0>; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | |
| IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | |
| IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| soc: soc@f0000000 { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0x0 0x0 0xf0000000 0x10000000>; |
| |
| crg: clock-reset-controller@8a22000 { |
| compatible = "hisilicon,hi3798cv200-crg", "syscon", "simple-mfd"; |
| reg = <0x8a22000 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <2>; |
| |
| gmacphyrst: reset-controller { |
| compatible = "ti,syscon-reset"; |
| #reset-cells = <1>; |
| ti,reset-bits = |
| <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | |
| DEASSERT_SET|STATUS_NONE)>, |
| <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | |
| DEASSERT_SET|STATUS_NONE)>; |
| }; |
| }; |
| |
| sysctrl: system-controller@8000000 { |
| compatible = "hisilicon,hi3798cv200-sysctrl", "syscon"; |
| reg = <0x8000000 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <2>; |
| }; |
| |
| uart0: serial@8b00000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x8b00000 0x1000>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sysctrl HISTB_UART0_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@8b02000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x8b02000 0x1000>; |
| interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg HISTB_UART2_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@8b10000 { |
| compatible = "hisilicon,hix5hd2-i2c"; |
| reg = <0x8b10000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <400000>; |
| clocks = <&crg HISTB_I2C0_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@8b11000 { |
| compatible = "hisilicon,hix5hd2-i2c"; |
| reg = <0x8b11000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <400000>; |
| clocks = <&crg HISTB_I2C1_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@8b12000 { |
| compatible = "hisilicon,hix5hd2-i2c"; |
| reg = <0x8b12000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <400000>; |
| clocks = <&crg HISTB_I2C2_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@8b13000 { |
| compatible = "hisilicon,hix5hd2-i2c"; |
| reg = <0x8b13000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <400000>; |
| clocks = <&crg HISTB_I2C3_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@8b14000 { |
| compatible = "hisilicon,hix5hd2-i2c"; |
| reg = <0x8b14000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; |
| clock-frequency = <400000>; |
| clocks = <&crg HISTB_I2C4_CLK>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@8b1a000 { |
| compatible = "arm,pl022", "arm,primecell"; |
| reg = <0x8b1a000 0x1000>; |
| interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; |
| num-cs = <1>; |
| cs-gpios = <&gpio7 1 0>; |
| clocks = <&crg HISTB_SPI0_CLK>; |
| clock-names = "apb_pclk"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| emmc: mmc@9830000 { |
| compatible = "snps,dw-mshc"; |
| reg = <0x9830000 0x10000>; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg HISTB_MMC_CIU_CLK>, |
| <&crg HISTB_MMC_BIU_CLK>; |
| clock-names = "ciu", "biu"; |
| }; |
| |
| gpio0: gpio@8b20000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b20000 0x1000>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio1: gpio@8b21000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b21000 0x1000>; |
| interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio2: gpio@8b22000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b22000 0x1000>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio3: gpio@8b23000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b23000 0x1000>; |
| interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio4: gpio@8b24000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b24000 0x1000>; |
| interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio5: gpio@8004000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8004000 0x1000>; |
| interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio6: gpio@8b26000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b26000 0x1000>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio7: gpio@8b27000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b27000 0x1000>; |
| interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio8: gpio@8b28000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b28000 0x1000>; |
| interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio9: gpio@8b29000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b29000 0x1000>; |
| interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio10: gpio@8b2a000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b2a000 0x1000>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio11: gpio@8b2b000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b2b000 0x1000>; |
| interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gpio12: gpio@8b2c000 { |
| compatible = "arm,pl061", "arm,primecell"; |
| reg = <0x8b2c000 0x1000>; |
| interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| clocks = <&crg HISTB_APB_CLK>; |
| clock-names = "apb_pclk"; |
| status = "disabled"; |
| }; |
| |
| gmac0: ethernet@9840000 { |
| compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2"; |
| reg = <0x9840000 0x1000>, |
| <0x984300c 0x4>; |
| interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg HISTB_ETH0_MAC_CLK>, |
| <&crg HISTB_ETH0_MACIF_CLK>; |
| clock-names = "mac_core", "mac_ifc"; |
| resets = <&crg 0xcc 8>, |
| <&crg 0xcc 10>, |
| <&gmacphyrst 0>; |
| reset-names = "mac_core", "mac_ifc", "phy"; |
| status = "disabled"; |
| }; |
| |
| gmac1: ethernet@9841000 { |
| compatible = "hisilicon,hi3798cv200-gmac", "hisilicon,hisi-gmac-v2"; |
| reg = <0x9841000 0x1000>, |
| <0x9843010 0x4>; |
| interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&crg HISTB_ETH1_MAC_CLK>, |
| <&crg HISTB_ETH1_MACIF_CLK>; |
| clock-names = "mac_core", "mac_ifc"; |
| resets = <&crg 0xcc 9>, |
| <&crg 0xcc 11>, |
| <&gmacphyrst 1>; |
| reset-names = "mac_core", "mac_ifc", "phy"; |
| status = "disabled"; |
| }; |
| |
| ir: ir@8001000 { |
| compatible = "hisilicon,hix5hd2-ir"; |
| reg = <0x8001000 0x1000>; |
| interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&sysctrl HISTB_IR_CLK>; |
| status = "disabled"; |
| }; |
| }; |
| }; |