| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2018 Álvaro Fernández Rojas <noltari@gmail.com> |
| * |
| * Derived from linux/arch/mips/bcm63xx/usb-common.c: |
| * Copyright 2008 Maxime Bizon <mbizon@freebox.fr> |
| * Copyright 2013 Florian Fainelli <florian@openwrt.org> |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <generic-phy.h> |
| #include <log.h> |
| #include <malloc.h> |
| #include <power-domain.h> |
| #include <reset.h> |
| #include <asm/io.h> |
| #include <dm/device.h> |
| |
| /* USBH PLL Control register */ |
| #define USBH_PLL_REG 0x18 |
| #define USBH_PLL_IDDQ_PWRDN BIT(9) |
| #define USBH_PLL_PWRDN_DELAY BIT(10) |
| |
| /* USBH Swap Control register */ |
| #define USBH_SWAP_REG 0x1c |
| #define USBH_SWAP_OHCI_DATA BIT(0) |
| #define USBH_SWAP_OHCI_ENDIAN BIT(1) |
| #define USBH_SWAP_EHCI_DATA BIT(3) |
| #define USBH_SWAP_EHCI_ENDIAN BIT(4) |
| |
| /* USBH Setup register */ |
| #define USBH_SETUP_REG 0x28 |
| #define USBH_SETUP_IOC BIT(4) |
| #define USBH_SETUP_IPP BIT(5) |
| |
| struct bcm6368_usbh_hw { |
| uint32_t setup_clr; |
| uint32_t pll_clr; |
| }; |
| |
| struct bcm6368_usbh_priv { |
| const struct bcm6368_usbh_hw *hw; |
| void __iomem *regs; |
| }; |
| |
| static int bcm6368_usbh_init(struct phy *phy) |
| { |
| struct bcm6368_usbh_priv *priv = dev_get_priv(phy->dev); |
| const struct bcm6368_usbh_hw *hw = priv->hw; |
| |
| /* configure to work in native cpu endian */ |
| clrsetbits_be32(priv->regs + USBH_SWAP_REG, |
| USBH_SWAP_EHCI_ENDIAN | USBH_SWAP_OHCI_ENDIAN, |
| USBH_SWAP_EHCI_DATA | USBH_SWAP_OHCI_DATA); |
| |
| /* setup config */ |
| if (hw->setup_clr) |
| clrbits_be32(priv->regs + USBH_SETUP_REG, hw->setup_clr); |
| |
| setbits_be32(priv->regs + USBH_SETUP_REG, USBH_SETUP_IOC); |
| |
| /* enable pll control */ |
| if (hw->pll_clr) |
| clrbits_be32(priv->regs + USBH_PLL_REG, hw->pll_clr); |
| |
| return 0; |
| } |
| |
| static struct phy_ops bcm6368_usbh_ops = { |
| .init = bcm6368_usbh_init, |
| }; |
| |
| static const struct bcm6368_usbh_hw bcm6328_hw = { |
| .pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY, |
| .setup_clr = 0, |
| }; |
| |
| static const struct bcm6368_usbh_hw bcm6362_hw = { |
| .pll_clr = 0, |
| .setup_clr = 0, |
| }; |
| |
| static const struct bcm6368_usbh_hw bcm6368_hw = { |
| .pll_clr = 0, |
| .setup_clr = 0, |
| }; |
| |
| static const struct bcm6368_usbh_hw bcm63268_hw = { |
| .pll_clr = USBH_PLL_IDDQ_PWRDN | USBH_PLL_PWRDN_DELAY, |
| .setup_clr = USBH_SETUP_IPP, |
| }; |
| |
| static const struct udevice_id bcm6368_usbh_ids[] = { |
| { |
| .compatible = "brcm,bcm6328-usbh", |
| .data = (ulong)&bcm6328_hw, |
| }, { |
| .compatible = "brcm,bcm6362-usbh", |
| .data = (ulong)&bcm6362_hw, |
| }, { |
| .compatible = "brcm,bcm6368-usbh", |
| .data = (ulong)&bcm6368_hw, |
| }, { |
| .compatible = "brcm,bcm63268-usbh", |
| .data = (ulong)&bcm63268_hw, |
| }, { /* sentinel */ } |
| }; |
| |
| static int bcm6368_usbh_probe(struct udevice *dev) |
| { |
| struct bcm6368_usbh_priv *priv = dev_get_priv(dev); |
| const struct bcm6368_usbh_hw *hw = |
| (const struct bcm6368_usbh_hw *)dev_get_driver_data(dev); |
| #if defined(CONFIG_POWER_DOMAIN) |
| struct power_domain pwr_dom; |
| #endif |
| struct reset_ctl rst_ctl; |
| struct clk clk; |
| int ret; |
| |
| priv->regs = dev_remap_addr(dev); |
| if (!priv->regs) |
| return -EINVAL; |
| |
| priv->hw = hw; |
| |
| /* enable usbh clock */ |
| ret = clk_get_by_name(dev, "usbh", &clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_enable(&clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_free(&clk); |
| if (ret < 0) |
| return ret; |
| |
| #if defined(CONFIG_POWER_DOMAIN) |
| /* enable power domain */ |
| ret = power_domain_get(dev, &pwr_dom); |
| if (ret < 0) |
| return ret; |
| |
| ret = power_domain_on(&pwr_dom); |
| if (ret < 0) |
| return ret; |
| |
| ret = power_domain_free(&pwr_dom); |
| if (ret < 0) |
| return ret; |
| #endif |
| |
| /* perform reset */ |
| ret = reset_get_by_index(dev, 0, &rst_ctl); |
| if (ret < 0) |
| return ret; |
| |
| ret = reset_deassert(&rst_ctl); |
| if (ret < 0) |
| return ret; |
| |
| ret = reset_free(&rst_ctl); |
| if (ret < 0) |
| return ret; |
| |
| /* enable usb_ref clock */ |
| ret = clk_get_by_name(dev, "usb_ref", &clk); |
| if (!ret) { |
| ret = clk_enable(&clk); |
| if (ret < 0) |
| return ret; |
| |
| ret = clk_free(&clk); |
| if (ret < 0) |
| return ret; |
| } |
| |
| mdelay(100); |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(bcm6368_usbh) = { |
| .name = "bcm6368-usbh", |
| .id = UCLASS_PHY, |
| .of_match = bcm6368_usbh_ids, |
| .ops = &bcm6368_usbh_ops, |
| .priv_auto_alloc_size = sizeof(struct bcm6368_usbh_priv), |
| .probe = bcm6368_usbh_probe, |
| }; |