| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/ |
| * Written by Jean-Jacques Hiblot <jjhiblot@ti.com> |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <log.h> |
| #include <dm/device.h> |
| #include <generic-phy.h> |
| #include <asm/io.h> |
| #include <asm/arch/psc_defs.h> |
| |
| /* USB PHY control register offsets */ |
| #define USB_PHY_CTL_UTMI 0x0000 |
| #define USB_PHY_CTL_PIPE 0x0004 |
| #define USB_PHY_CTL_PARAM_1 0x0008 |
| #define USB_PHY_CTL_PARAM_2 0x000c |
| #define USB_PHY_CTL_CLOCK 0x0010 |
| #define USB_PHY_CTL_PLL 0x0014 |
| |
| #define PHY_OTG_VBUSVLDECTSEL BIT(16) |
| #define PHY_REF_SSP_EN BIT(29) |
| |
| struct keystone_usb_phy { |
| u32 psc_domain; |
| void __iomem *reg; |
| }; |
| |
| static int keystone_usb_init(struct phy *phy) |
| { |
| u32 val; |
| int rc; |
| struct udevice *dev = phy->dev; |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); |
| |
| /* Release USB from reset */ |
| rc = psc_enable_module(keystone->psc_domain); |
| if (rc) { |
| debug("Cannot enable USB module"); |
| return -rc; |
| } |
| mdelay(10); |
| |
| /* |
| * VBUSVLDEXTSEL has a default value of 1 in BootCfg but shouldn't. |
| * It should always be cleared because our USB PHY has an onchip VBUS |
| * analog comparator. |
| */ |
| val = readl(keystone->reg + USB_PHY_CTL_CLOCK); |
| /* quit selecting the vbusvldextsel by default! */ |
| val &= ~PHY_OTG_VBUSVLDECTSEL; |
| writel(val, keystone->reg + USB_PHY_CTL_CLOCK); |
| |
| return 0; |
| } |
| |
| static int keystone_usb_power_on(struct phy *phy) |
| { |
| u32 val; |
| struct udevice *dev = phy->dev; |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); |
| |
| val = readl(keystone->reg + USB_PHY_CTL_CLOCK); |
| val |= PHY_REF_SSP_EN; |
| writel(val, keystone->reg + USB_PHY_CTL_CLOCK); |
| |
| return 0; |
| } |
| |
| static int keystone_usb_power_off(struct phy *phy) |
| { |
| u32 val; |
| struct udevice *dev = phy->dev; |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); |
| |
| val = readl(keystone->reg + USB_PHY_CTL_CLOCK); |
| val &= ~PHY_REF_SSP_EN; |
| writel(val, keystone->reg + USB_PHY_CTL_CLOCK); |
| |
| return 0; |
| } |
| |
| static int keystone_usb_exit(struct phy *phy) |
| { |
| struct udevice *dev = phy->dev; |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); |
| |
| if (psc_disable_module(keystone->psc_domain)) |
| debug("failed to disable USB module!\n"); |
| |
| return 0; |
| } |
| |
| static int keystone_usb_phy_probe(struct udevice *dev) |
| { |
| int rc; |
| struct keystone_usb_phy *keystone = dev_get_priv(dev); |
| |
| rc = dev_read_u32(dev, "psc-domain", &keystone->psc_domain); |
| if (rc) |
| return rc; |
| |
| keystone->reg = dev_remap_addr_index(dev, 0); |
| if (!keystone->reg) { |
| pr_err("unable to remap usb phy\n"); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static const struct udevice_id keystone_usb_phy_ids[] = { |
| { .compatible = "ti,keystone-usbphy" }, |
| { } |
| }; |
| |
| static struct phy_ops keystone_usb_phy_ops = { |
| .init = keystone_usb_init, |
| .power_on = keystone_usb_power_on, |
| .power_off = keystone_usb_power_off, |
| .exit = keystone_usb_exit, |
| }; |
| |
| U_BOOT_DRIVER(keystone_usb_phy) = { |
| .name = "keystone_usb_phy", |
| .id = UCLASS_PHY, |
| .of_match = keystone_usb_phy_ids, |
| .ops = &keystone_usb_phy_ops, |
| .probe = keystone_usb_phy_probe, |
| .priv_auto_alloc_size = sizeof(struct keystone_usb_phy), |
| }; |