| /*- |
| * Copyright (c) 2007-2008, Juniper Networks, Inc. |
| * Copyright (c) 2008, Excito Elektronik i Skåne AB |
| * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it> |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation version 2 of |
| * the License. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| #include <common.h> |
| #include <asm/byteorder.h> |
| #include <usb.h> |
| #include <asm/io.h> |
| #include <malloc.h> |
| #include <watchdog.h> |
| #ifdef CONFIG_USB_KEYBOARD |
| #include <stdio_dev.h> |
| extern unsigned char new[]; |
| #endif |
| |
| #include "ehci.h" |
| |
| int rootdev; |
| struct ehci_hccr *hccr; /* R/O registers, not need for volatile */ |
| volatile struct ehci_hcor *hcor; |
| |
| static uint16_t portreset; |
| static struct QH qh_list __attribute__((aligned(32))); |
| |
| static struct descriptor { |
| struct usb_hub_descriptor hub; |
| struct usb_device_descriptor device; |
| struct usb_linux_config_descriptor config; |
| struct usb_linux_interface_descriptor interface; |
| struct usb_endpoint_descriptor endpoint; |
| } __attribute__ ((packed)) descriptor = { |
| { |
| 0x8, /* bDescLength */ |
| 0x29, /* bDescriptorType: hub descriptor */ |
| 2, /* bNrPorts -- runtime modified */ |
| 0, /* wHubCharacteristics */ |
| 10, /* bPwrOn2PwrGood */ |
| 0, /* bHubCntrCurrent */ |
| {}, /* Device removable */ |
| {} /* at most 7 ports! XXX */ |
| }, |
| { |
| 0x12, /* bLength */ |
| 1, /* bDescriptorType: UDESC_DEVICE */ |
| cpu_to_le16(0x0200), /* bcdUSB: v2.0 */ |
| 9, /* bDeviceClass: UDCLASS_HUB */ |
| 0, /* bDeviceSubClass: UDSUBCLASS_HUB */ |
| 1, /* bDeviceProtocol: UDPROTO_HSHUBSTT */ |
| 64, /* bMaxPacketSize: 64 bytes */ |
| 0x0000, /* idVendor */ |
| 0x0000, /* idProduct */ |
| cpu_to_le16(0x0100), /* bcdDevice */ |
| 1, /* iManufacturer */ |
| 2, /* iProduct */ |
| 0, /* iSerialNumber */ |
| 1 /* bNumConfigurations: 1 */ |
| }, |
| { |
| 0x9, |
| 2, /* bDescriptorType: UDESC_CONFIG */ |
| cpu_to_le16(0x19), |
| 1, /* bNumInterface */ |
| 1, /* bConfigurationValue */ |
| 0, /* iConfiguration */ |
| 0x40, /* bmAttributes: UC_SELF_POWER */ |
| 0 /* bMaxPower */ |
| }, |
| { |
| 0x9, /* bLength */ |
| 4, /* bDescriptorType: UDESC_INTERFACE */ |
| 0, /* bInterfaceNumber */ |
| 0, /* bAlternateSetting */ |
| 1, /* bNumEndpoints */ |
| 9, /* bInterfaceClass: UICLASS_HUB */ |
| 0, /* bInterfaceSubClass: UISUBCLASS_HUB */ |
| 0, /* bInterfaceProtocol: UIPROTO_HSHUBSTT */ |
| 0 /* iInterface */ |
| }, |
| { |
| 0x7, /* bLength */ |
| 5, /* bDescriptorType: UDESC_ENDPOINT */ |
| 0x81, /* bEndpointAddress: |
| * UE_DIR_IN | EHCI_INTR_ENDPT |
| */ |
| 3, /* bmAttributes: UE_INTERRUPT */ |
| 8, /* wMaxPacketSize */ |
| 255 /* bInterval */ |
| }, |
| }; |
| |
| #if defined(CONFIG_EHCI_IS_TDI) |
| #define ehci_is_TDI() (1) |
| #else |
| #define ehci_is_TDI() (0) |
| #endif |
| |
| #if defined(CONFIG_EHCI_DCACHE) |
| /* |
| * Routines to handle (flush/invalidate) the dcache for the QH and qTD |
| * structures and data buffers. This is needed on platforms using this |
| * EHCI support with dcache enabled. |
| */ |
| static void flush_invalidate(u32 addr, int size, int flush) |
| { |
| if (flush) |
| flush_dcache_range(addr, addr + size); |
| else |
| invalidate_dcache_range(addr, addr + size); |
| } |
| |
| static void cache_qtd(struct qTD *qtd, int flush) |
| { |
| u32 *ptr = (u32 *)qtd->qt_buffer[0]; |
| int len = (qtd->qt_token & 0x7fff0000) >> 16; |
| |
| flush_invalidate((u32)qtd, sizeof(struct qTD), flush); |
| if (ptr && len) |
| flush_invalidate((u32)ptr, len, flush); |
| } |
| |
| |
| static inline struct QH *qh_addr(struct QH *qh) |
| { |
| return (struct QH *)((u32)qh & 0xffffffe0); |
| } |
| |
| static void cache_qh(struct QH *qh, int flush) |
| { |
| struct qTD *qtd; |
| struct qTD *next; |
| static struct qTD *first_qtd; |
| |
| /* |
| * Walk the QH list and flush/invalidate all entries |
| */ |
| while (1) { |
| flush_invalidate((u32)qh_addr(qh), sizeof(struct QH), flush); |
| if ((u32)qh & QH_LINK_TYPE_QH) |
| break; |
| qh = qh_addr(qh); |
| qh = (struct QH *)qh->qh_link; |
| } |
| qh = qh_addr(qh); |
| |
| /* |
| * Save first qTD pointer, needed for invalidating pass on this QH |
| */ |
| if (flush) |
| first_qtd = qtd = (struct qTD *)(*(u32 *)&qh->qh_overlay & |
| 0xffffffe0); |
| else |
| qtd = first_qtd; |
| |
| /* |
| * Walk the qTD list and flush/invalidate all entries |
| */ |
| while (1) { |
| if (qtd == NULL) |
| break; |
| cache_qtd(qtd, flush); |
| next = (struct qTD *)((u32)qtd->qt_next & 0xffffffe0); |
| if (next == qtd) |
| break; |
| qtd = next; |
| } |
| } |
| |
| static inline void ehci_flush_dcache(struct QH *qh) |
| { |
| cache_qh(qh, 1); |
| } |
| |
| static inline void ehci_invalidate_dcache(struct QH *qh) |
| { |
| cache_qh(qh, 0); |
| } |
| #else /* CONFIG_EHCI_DCACHE */ |
| /* |
| * |
| */ |
| static inline void ehci_flush_dcache(struct QH *qh) |
| { |
| } |
| |
| static inline void ehci_invalidate_dcache(struct QH *qh) |
| { |
| } |
| #endif /* CONFIG_EHCI_DCACHE */ |
| |
| static int handshake(uint32_t *ptr, uint32_t mask, uint32_t done, int usec) |
| { |
| uint32_t result; |
| do { |
| result = ehci_readl(ptr); |
| udelay(5); |
| if (result == ~(uint32_t)0) |
| return -1; |
| result &= mask; |
| if (result == done) |
| return 0; |
| usec--; |
| } while (usec > 0); |
| return -1; |
| } |
| |
| static void ehci_free(void *p, size_t sz) |
| { |
| |
| } |
| |
| static int ehci_reset(void) |
| { |
| uint32_t cmd; |
| uint32_t tmp; |
| uint32_t *reg_ptr; |
| int ret = 0; |
| |
| cmd = ehci_readl(&hcor->or_usbcmd); |
| cmd = (cmd & ~CMD_RUN) | CMD_RESET; |
| ehci_writel(&hcor->or_usbcmd, cmd); |
| ret = handshake((uint32_t *)&hcor->or_usbcmd, CMD_RESET, 0, 250 * 1000); |
| if (ret < 0) { |
| printf("EHCI fail to reset\n"); |
| goto out; |
| } |
| |
| if (ehci_is_TDI()) { |
| reg_ptr = (uint32_t *)((u8 *)hcor + USBMODE); |
| tmp = ehci_readl(reg_ptr); |
| tmp |= USBMODE_CM_HC; |
| #if defined(CONFIG_EHCI_MMIO_BIG_ENDIAN) |
| tmp |= USBMODE_BE; |
| #endif |
| ehci_writel(reg_ptr, tmp); |
| } |
| out: |
| return ret; |
| } |
| |
| static void *ehci_alloc(size_t sz, size_t align) |
| { |
| static struct QH qh __attribute__((aligned(32))); |
| static struct qTD td[3] __attribute__((aligned (32))); |
| static int ntds; |
| void *p; |
| |
| switch (sz) { |
| case sizeof(struct QH): |
| p = &qh; |
| ntds = 0; |
| break; |
| case sizeof(struct qTD): |
| if (ntds == 3) { |
| debug("out of TDs\n"); |
| return NULL; |
| } |
| p = &td[ntds]; |
| ntds++; |
| break; |
| default: |
| debug("unknown allocation size\n"); |
| return NULL; |
| } |
| |
| memset(p, 0, sz); |
| return p; |
| } |
| |
| static int ehci_td_buffer(struct qTD *td, void *buf, size_t sz) |
| { |
| uint32_t addr, delta, next; |
| int idx; |
| |
| addr = (uint32_t) buf; |
| idx = 0; |
| while (idx < 5) { |
| td->qt_buffer[idx] = cpu_to_hc32(addr); |
| td->qt_buffer_hi[idx] = 0; |
| next = (addr + 4096) & ~4095; |
| delta = next - addr; |
| if (delta >= sz) |
| break; |
| sz -= delta; |
| addr = next; |
| idx++; |
| } |
| |
| if (idx == 5) { |
| debug("out of buffer pointers (%u bytes left)\n", sz); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int |
| ehci_submit_async(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int length, struct devrequest *req) |
| { |
| struct QH *qh; |
| struct qTD *td; |
| volatile struct qTD *vtd; |
| unsigned long ts; |
| uint32_t *tdp; |
| uint32_t endpt, token, usbsts; |
| uint32_t c, toggle; |
| uint32_t cmd; |
| int timeout; |
| int ret = 0; |
| |
| debug("dev=%p, pipe=%lx, buffer=%p, length=%d, req=%p\n", dev, pipe, |
| buffer, length, req); |
| if (req != NULL) |
| debug("req=%u (%#x), type=%u (%#x), value=%u (%#x), index=%u\n", |
| req->request, req->request, |
| req->requesttype, req->requesttype, |
| le16_to_cpu(req->value), le16_to_cpu(req->value), |
| le16_to_cpu(req->index)); |
| |
| qh = ehci_alloc(sizeof(struct QH), 32); |
| if (qh == NULL) { |
| debug("unable to allocate QH\n"); |
| return -1; |
| } |
| qh->qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH); |
| c = (usb_pipespeed(pipe) != USB_SPEED_HIGH && |
| usb_pipeendpoint(pipe) == 0) ? 1 : 0; |
| endpt = (8 << 28) | |
| (c << 27) | |
| (usb_maxpacket(dev, pipe) << 16) | |
| (0 << 15) | |
| (1 << 14) | |
| (usb_pipespeed(pipe) << 12) | |
| (usb_pipeendpoint(pipe) << 8) | |
| (0 << 7) | (usb_pipedevice(pipe) << 0); |
| qh->qh_endpt1 = cpu_to_hc32(endpt); |
| endpt = (1 << 30) | |
| (dev->portnr << 23) | |
| (dev->parent->devnum << 16) | (0 << 8) | (0 << 0); |
| qh->qh_endpt2 = cpu_to_hc32(endpt); |
| qh->qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); |
| |
| td = NULL; |
| tdp = &qh->qh_overlay.qt_next; |
| |
| toggle = |
| usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); |
| |
| if (req != NULL) { |
| td = ehci_alloc(sizeof(struct qTD), 32); |
| if (td == NULL) { |
| debug("unable to allocate SETUP td\n"); |
| goto fail; |
| } |
| td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); |
| td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); |
| token = (0 << 31) | |
| (sizeof(*req) << 16) | |
| (0 << 15) | (0 << 12) | (3 << 10) | (2 << 8) | (0x80 << 0); |
| td->qt_token = cpu_to_hc32(token); |
| if (ehci_td_buffer(td, req, sizeof(*req)) != 0) { |
| debug("unable construct SETUP td\n"); |
| ehci_free(td, sizeof(*td)); |
| goto fail; |
| } |
| *tdp = cpu_to_hc32((uint32_t) td); |
| tdp = &td->qt_next; |
| toggle = 1; |
| } |
| |
| if (length > 0 || req == NULL) { |
| td = ehci_alloc(sizeof(struct qTD), 32); |
| if (td == NULL) { |
| debug("unable to allocate DATA td\n"); |
| goto fail; |
| } |
| td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); |
| td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); |
| token = (toggle << 31) | |
| (length << 16) | |
| ((req == NULL ? 1 : 0) << 15) | |
| (0 << 12) | |
| (3 << 10) | |
| ((usb_pipein(pipe) ? 1 : 0) << 8) | (0x80 << 0); |
| td->qt_token = cpu_to_hc32(token); |
| if (ehci_td_buffer(td, buffer, length) != 0) { |
| debug("unable construct DATA td\n"); |
| ehci_free(td, sizeof(*td)); |
| goto fail; |
| } |
| *tdp = cpu_to_hc32((uint32_t) td); |
| tdp = &td->qt_next; |
| } |
| |
| if (req != NULL) { |
| td = ehci_alloc(sizeof(struct qTD), 32); |
| if (td == NULL) { |
| debug("unable to allocate ACK td\n"); |
| goto fail; |
| } |
| td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); |
| td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); |
| token = (toggle << 31) | |
| (0 << 16) | |
| (1 << 15) | |
| (0 << 12) | |
| (3 << 10) | |
| ((usb_pipein(pipe) ? 0 : 1) << 8) | (0x80 << 0); |
| td->qt_token = cpu_to_hc32(token); |
| *tdp = cpu_to_hc32((uint32_t) td); |
| tdp = &td->qt_next; |
| } |
| |
| qh_list.qh_link = cpu_to_hc32((uint32_t) qh | QH_LINK_TYPE_QH); |
| |
| /* Flush dcache */ |
| ehci_flush_dcache(&qh_list); |
| |
| usbsts = ehci_readl(&hcor->or_usbsts); |
| ehci_writel(&hcor->or_usbsts, (usbsts & 0x3f)); |
| |
| /* Enable async. schedule. */ |
| cmd = ehci_readl(&hcor->or_usbcmd); |
| cmd |= CMD_ASE; |
| ehci_writel(&hcor->or_usbcmd, cmd); |
| |
| ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, STD_ASS, |
| 100 * 1000); |
| if (ret < 0) { |
| printf("EHCI fail timeout STD_ASS set\n"); |
| goto fail; |
| } |
| |
| /* Wait for TDs to be processed. */ |
| ts = get_timer(0); |
| vtd = td; |
| timeout = USB_TIMEOUT_MS(pipe); |
| do { |
| /* Invalidate dcache */ |
| ehci_invalidate_dcache(&qh_list); |
| token = hc32_to_cpu(vtd->qt_token); |
| if (!(token & 0x80)) |
| break; |
| WATCHDOG_RESET(); |
| } while (get_timer(ts) < timeout); |
| |
| /* Check that the TD processing happened */ |
| if (token & 0x80) { |
| printf("EHCI timed out on TD - token=%#x\n", token); |
| } |
| |
| /* Disable async schedule. */ |
| cmd = ehci_readl(&hcor->or_usbcmd); |
| cmd &= ~CMD_ASE; |
| ehci_writel(&hcor->or_usbcmd, cmd); |
| |
| ret = handshake((uint32_t *)&hcor->or_usbsts, STD_ASS, 0, |
| 100 * 1000); |
| if (ret < 0) { |
| printf("EHCI fail timeout STD_ASS reset\n"); |
| goto fail; |
| } |
| |
| qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH); |
| |
| token = hc32_to_cpu(qh->qh_overlay.qt_token); |
| if (!(token & 0x80)) { |
| debug("TOKEN=%#x\n", token); |
| switch (token & 0xfc) { |
| case 0: |
| toggle = token >> 31; |
| usb_settoggle(dev, usb_pipeendpoint(pipe), |
| usb_pipeout(pipe), toggle); |
| dev->status = 0; |
| break; |
| case 0x40: |
| dev->status = USB_ST_STALLED; |
| break; |
| case 0xa0: |
| case 0x20: |
| dev->status = USB_ST_BUF_ERR; |
| break; |
| case 0x50: |
| case 0x10: |
| dev->status = USB_ST_BABBLE_DET; |
| break; |
| default: |
| dev->status = USB_ST_CRC_ERR; |
| if ((token & 0x40) == 0x40) |
| dev->status |= USB_ST_STALLED; |
| break; |
| } |
| dev->act_len = length - ((token >> 16) & 0x7fff); |
| } else { |
| dev->act_len = 0; |
| debug("dev=%u, usbsts=%#x, p[1]=%#x, p[2]=%#x\n", |
| dev->devnum, ehci_readl(&hcor->or_usbsts), |
| ehci_readl(&hcor->or_portsc[0]), |
| ehci_readl(&hcor->or_portsc[1])); |
| } |
| |
| return (dev->status != USB_ST_NOT_PROC) ? 0 : -1; |
| |
| fail: |
| td = (void *)hc32_to_cpu(qh->qh_overlay.qt_next); |
| while (td != (void *)QT_NEXT_TERMINATE) { |
| qh->qh_overlay.qt_next = td->qt_next; |
| ehci_free(td, sizeof(*td)); |
| td = (void *)hc32_to_cpu(qh->qh_overlay.qt_next); |
| } |
| ehci_free(qh, sizeof(*qh)); |
| return -1; |
| } |
| |
| static inline int min3(int a, int b, int c) |
| { |
| |
| if (b < a) |
| a = b; |
| if (c < a) |
| a = c; |
| return a; |
| } |
| |
| int |
| ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int length, struct devrequest *req) |
| { |
| uint8_t tmpbuf[4]; |
| u16 typeReq; |
| void *srcptr = NULL; |
| int len, srclen; |
| uint32_t reg; |
| uint32_t *status_reg; |
| |
| if (le16_to_cpu(req->index) > CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) { |
| printf("The request port(%d) is not configured\n", |
| le16_to_cpu(req->index) - 1); |
| return -1; |
| } |
| status_reg = (uint32_t *)&hcor->or_portsc[ |
| le16_to_cpu(req->index) - 1]; |
| srclen = 0; |
| |
| debug("req=%u (%#x), type=%u (%#x), value=%u, index=%u\n", |
| req->request, req->request, |
| req->requesttype, req->requesttype, |
| le16_to_cpu(req->value), le16_to_cpu(req->index)); |
| |
| typeReq = req->request | req->requesttype << 8; |
| |
| switch (typeReq) { |
| case DeviceRequest | USB_REQ_GET_DESCRIPTOR: |
| switch (le16_to_cpu(req->value) >> 8) { |
| case USB_DT_DEVICE: |
| debug("USB_DT_DEVICE request\n"); |
| srcptr = &descriptor.device; |
| srclen = 0x12; |
| break; |
| case USB_DT_CONFIG: |
| debug("USB_DT_CONFIG config\n"); |
| srcptr = &descriptor.config; |
| srclen = 0x19; |
| break; |
| case USB_DT_STRING: |
| debug("USB_DT_STRING config\n"); |
| switch (le16_to_cpu(req->value) & 0xff) { |
| case 0: /* Language */ |
| srcptr = "\4\3\1\0"; |
| srclen = 4; |
| break; |
| case 1: /* Vendor */ |
| srcptr = "\16\3u\0-\0b\0o\0o\0t\0"; |
| srclen = 14; |
| break; |
| case 2: /* Product */ |
| srcptr = "\52\3E\0H\0C\0I\0 " |
| "\0H\0o\0s\0t\0 " |
| "\0C\0o\0n\0t\0r\0o\0l\0l\0e\0r\0"; |
| srclen = 42; |
| break; |
| default: |
| debug("unknown value DT_STRING %x\n", |
| le16_to_cpu(req->value)); |
| goto unknown; |
| } |
| break; |
| default: |
| debug("unknown value %x\n", le16_to_cpu(req->value)); |
| goto unknown; |
| } |
| break; |
| case USB_REQ_GET_DESCRIPTOR | ((USB_DIR_IN | USB_RT_HUB) << 8): |
| switch (le16_to_cpu(req->value) >> 8) { |
| case USB_DT_HUB: |
| debug("USB_DT_HUB config\n"); |
| srcptr = &descriptor.hub; |
| srclen = 0x8; |
| break; |
| default: |
| debug("unknown value %x\n", le16_to_cpu(req->value)); |
| goto unknown; |
| } |
| break; |
| case USB_REQ_SET_ADDRESS | (USB_RECIP_DEVICE << 8): |
| debug("USB_REQ_SET_ADDRESS\n"); |
| rootdev = le16_to_cpu(req->value); |
| break; |
| case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: |
| debug("USB_REQ_SET_CONFIGURATION\n"); |
| /* Nothing to do */ |
| break; |
| case USB_REQ_GET_STATUS | ((USB_DIR_IN | USB_RT_HUB) << 8): |
| tmpbuf[0] = 1; /* USB_STATUS_SELFPOWERED */ |
| tmpbuf[1] = 0; |
| srcptr = tmpbuf; |
| srclen = 2; |
| break; |
| case USB_REQ_GET_STATUS | ((USB_RT_PORT | USB_DIR_IN) << 8): |
| memset(tmpbuf, 0, 4); |
| reg = ehci_readl(status_reg); |
| if (reg & EHCI_PS_CS) |
| tmpbuf[0] |= USB_PORT_STAT_CONNECTION; |
| if (reg & EHCI_PS_PE) |
| tmpbuf[0] |= USB_PORT_STAT_ENABLE; |
| if (reg & EHCI_PS_SUSP) |
| tmpbuf[0] |= USB_PORT_STAT_SUSPEND; |
| if (reg & EHCI_PS_OCA) |
| tmpbuf[0] |= USB_PORT_STAT_OVERCURRENT; |
| if (reg & EHCI_PS_PR) |
| tmpbuf[0] |= USB_PORT_STAT_RESET; |
| if (reg & EHCI_PS_PP) |
| tmpbuf[1] |= USB_PORT_STAT_POWER >> 8; |
| |
| if (ehci_is_TDI()) { |
| switch ((reg >> 26) & 3) { |
| case 0: |
| break; |
| case 1: |
| tmpbuf[1] |= USB_PORT_STAT_LOW_SPEED >> 8; |
| break; |
| case 2: |
| default: |
| tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; |
| break; |
| } |
| } else { |
| tmpbuf[1] |= USB_PORT_STAT_HIGH_SPEED >> 8; |
| } |
| |
| if (reg & EHCI_PS_CSC) |
| tmpbuf[2] |= USB_PORT_STAT_C_CONNECTION; |
| if (reg & EHCI_PS_PEC) |
| tmpbuf[2] |= USB_PORT_STAT_C_ENABLE; |
| if (reg & EHCI_PS_OCC) |
| tmpbuf[2] |= USB_PORT_STAT_C_OVERCURRENT; |
| if (portreset & (1 << le16_to_cpu(req->index))) |
| tmpbuf[2] |= USB_PORT_STAT_C_RESET; |
| |
| srcptr = tmpbuf; |
| srclen = 4; |
| break; |
| case USB_REQ_SET_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): |
| reg = ehci_readl(status_reg); |
| reg &= ~EHCI_PS_CLEAR; |
| switch (le16_to_cpu(req->value)) { |
| case USB_PORT_FEAT_ENABLE: |
| reg |= EHCI_PS_PE; |
| ehci_writel(status_reg, reg); |
| break; |
| case USB_PORT_FEAT_POWER: |
| if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams))) { |
| reg |= EHCI_PS_PP; |
| ehci_writel(status_reg, reg); |
| } |
| break; |
| case USB_PORT_FEAT_RESET: |
| if ((reg & (EHCI_PS_PE | EHCI_PS_CS)) == EHCI_PS_CS && |
| !ehci_is_TDI() && |
| EHCI_PS_IS_LOWSPEED(reg)) { |
| /* Low speed device, give up ownership. */ |
| debug("port %d low speed --> companion\n", |
| req->index - 1); |
| reg |= EHCI_PS_PO; |
| ehci_writel(status_reg, reg); |
| break; |
| } else { |
| int ret; |
| |
| reg |= EHCI_PS_PR; |
| reg &= ~EHCI_PS_PE; |
| ehci_writel(status_reg, reg); |
| /* |
| * caller must wait, then call GetPortStatus |
| * usb 2.0 specification say 50 ms resets on |
| * root |
| */ |
| wait_ms(50); |
| /* terminate the reset */ |
| ehci_writel(status_reg, reg & ~EHCI_PS_PR); |
| /* |
| * A host controller must terminate the reset |
| * and stabilize the state of the port within |
| * 2 milliseconds |
| */ |
| ret = handshake(status_reg, EHCI_PS_PR, 0, |
| 2 * 1000); |
| if (!ret) |
| portreset |= |
| 1 << le16_to_cpu(req->index); |
| else |
| printf("port(%d) reset error\n", |
| le16_to_cpu(req->index) - 1); |
| } |
| break; |
| default: |
| debug("unknown feature %x\n", le16_to_cpu(req->value)); |
| goto unknown; |
| } |
| /* unblock posted writes */ |
| (void) ehci_readl(&hcor->or_usbcmd); |
| break; |
| case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): |
| reg = ehci_readl(status_reg); |
| switch (le16_to_cpu(req->value)) { |
| case USB_PORT_FEAT_ENABLE: |
| reg &= ~EHCI_PS_PE; |
| break; |
| case USB_PORT_FEAT_C_ENABLE: |
| reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE; |
| break; |
| case USB_PORT_FEAT_POWER: |
| if (HCS_PPC(ehci_readl(&hccr->cr_hcsparams))) |
| reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP); |
| case USB_PORT_FEAT_C_CONNECTION: |
| reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC; |
| break; |
| case USB_PORT_FEAT_OVER_CURRENT: |
| reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC; |
| break; |
| case USB_PORT_FEAT_C_RESET: |
| portreset &= ~(1 << le16_to_cpu(req->index)); |
| break; |
| default: |
| debug("unknown feature %x\n", le16_to_cpu(req->value)); |
| goto unknown; |
| } |
| ehci_writel(status_reg, reg); |
| /* unblock posted write */ |
| (void) ehci_readl(&hcor->or_usbcmd); |
| break; |
| default: |
| debug("Unknown request\n"); |
| goto unknown; |
| } |
| |
| wait_ms(1); |
| len = min3(srclen, le16_to_cpu(req->length), length); |
| if (srcptr != NULL && len > 0) |
| memcpy(buffer, srcptr, len); |
| else |
| debug("Len is 0\n"); |
| |
| dev->act_len = len; |
| dev->status = 0; |
| return 0; |
| |
| unknown: |
| debug("requesttype=%x, request=%x, value=%x, index=%x, length=%x\n", |
| req->requesttype, req->request, le16_to_cpu(req->value), |
| le16_to_cpu(req->index), le16_to_cpu(req->length)); |
| |
| dev->act_len = 0; |
| dev->status = USB_ST_STALLED; |
| return -1; |
| } |
| |
| int usb_lowlevel_stop(void) |
| { |
| return ehci_hcd_stop(); |
| } |
| |
| int usb_lowlevel_init(void) |
| { |
| uint32_t reg; |
| uint32_t cmd; |
| |
| if (ehci_hcd_init() != 0) |
| return -1; |
| |
| /* EHCI spec section 4.1 */ |
| if (ehci_reset() != 0) |
| return -1; |
| |
| #if defined(CONFIG_EHCI_HCD_INIT_AFTER_RESET) |
| if (ehci_hcd_init() != 0) |
| return -1; |
| #endif |
| |
| /* Set head of reclaim list */ |
| memset(&qh_list, 0, sizeof(qh_list)); |
| qh_list.qh_link = cpu_to_hc32((uint32_t)&qh_list | QH_LINK_TYPE_QH); |
| qh_list.qh_endpt1 = cpu_to_hc32((1 << 15) | (USB_SPEED_HIGH << 12)); |
| qh_list.qh_curtd = cpu_to_hc32(QT_NEXT_TERMINATE); |
| qh_list.qh_overlay.qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); |
| qh_list.qh_overlay.qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); |
| qh_list.qh_overlay.qt_token = cpu_to_hc32(0x40); |
| |
| /* Set async. queue head pointer. */ |
| ehci_writel(&hcor->or_asynclistaddr, (uint32_t)&qh_list); |
| |
| reg = ehci_readl(&hccr->cr_hcsparams); |
| descriptor.hub.bNbrPorts = HCS_N_PORTS(reg); |
| printf("Register %x NbrPorts %d\n", reg, descriptor.hub.bNbrPorts); |
| /* Port Indicators */ |
| if (HCS_INDICATOR(reg)) |
| descriptor.hub.wHubCharacteristics |= 0x80; |
| /* Port Power Control */ |
| if (HCS_PPC(reg)) |
| descriptor.hub.wHubCharacteristics |= 0x01; |
| |
| /* Start the host controller. */ |
| cmd = ehci_readl(&hcor->or_usbcmd); |
| /* |
| * Philips, Intel, and maybe others need CMD_RUN before the |
| * root hub will detect new devices (why?); NEC doesn't |
| */ |
| cmd &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); |
| cmd |= CMD_RUN; |
| ehci_writel(&hcor->or_usbcmd, cmd); |
| |
| /* take control over the ports */ |
| cmd = ehci_readl(&hcor->or_configflag); |
| cmd |= FLAG_CF; |
| ehci_writel(&hcor->or_configflag, cmd); |
| /* unblock posted write */ |
| cmd = ehci_readl(&hcor->or_usbcmd); |
| wait_ms(5); |
| reg = HC_VERSION(ehci_readl(&hccr->cr_capbase)); |
| printf("USB EHCI %x.%02x\n", reg >> 8, reg & 0xff); |
| |
| rootdev = 0; |
| |
| return 0; |
| } |
| |
| int |
| submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int length) |
| { |
| |
| if (usb_pipetype(pipe) != PIPE_BULK) { |
| debug("non-bulk pipe (type=%lu)", usb_pipetype(pipe)); |
| return -1; |
| } |
| return ehci_submit_async(dev, pipe, buffer, length, NULL); |
| } |
| |
| int |
| submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int length, struct devrequest *setup) |
| { |
| |
| if (usb_pipetype(pipe) != PIPE_CONTROL) { |
| debug("non-control pipe (type=%lu)", usb_pipetype(pipe)); |
| return -1; |
| } |
| |
| if (usb_pipedevice(pipe) == rootdev) { |
| if (rootdev == 0) |
| dev->speed = USB_SPEED_HIGH; |
| return ehci_submit_root(dev, pipe, buffer, length, setup); |
| } |
| return ehci_submit_async(dev, pipe, buffer, length, setup); |
| } |
| |
| int |
| submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, |
| int length, int interval) |
| { |
| |
| debug("dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", |
| dev, pipe, buffer, length, interval); |
| return ehci_submit_async(dev, pipe, buffer, length, NULL); |
| } |
| |
| #ifdef CONFIG_SYS_USB_EVENT_POLL |
| /* |
| * This function polls for USB keyboard data. |
| */ |
| void usb_event_poll() |
| { |
| struct stdio_dev *dev; |
| struct usb_device *usb_kbd_dev; |
| struct usb_interface *iface; |
| struct usb_endpoint_descriptor *ep; |
| int pipe; |
| int maxp; |
| |
| /* Get the pointer to USB Keyboard device pointer */ |
| dev = stdio_get_by_name("usbkbd"); |
| usb_kbd_dev = (struct usb_device *)dev->priv; |
| iface = &usb_kbd_dev->config.if_desc[0]; |
| ep = &iface->ep_desc[0]; |
| pipe = usb_rcvintpipe(usb_kbd_dev, ep->bEndpointAddress); |
| |
| /* Submit a interrupt transfer request */ |
| maxp = usb_maxpacket(usb_kbd_dev, pipe); |
| usb_submit_int_msg(usb_kbd_dev, pipe, &new[0], |
| maxp > 8 ? 8 : maxp, ep->bInterval); |
| } |
| #endif /* CONFIG_SYS_USB_EVENT_POLL */ |