board/aristainetos/aristainetos-v2.c - platform/external/u-boot - Gitiles

 // SPDX-License-Identifier: GPL-2.0+
 /*
  * (C) Copyright 2015
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
  * Based on:
  * Copyright (C) 2012 Freescale Semiconductor, Inc.
  *
  * Author: Fabio Estevam <fabio.estevam@freescale.com>
  */

 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/mx6-pins.h>
 #include <linux/errno.h>
 #include <asm/gpio.h>
 #include <asm/mach-imx/iomux-v3.h>
 #include <asm/mach-imx/boot_mode.h>
 #include <asm/mach-imx/mxc_i2c.h>
 #include <asm/mach-imx/video.h>
 #include <mmc.h>
 #include <fsl_esdhc_imx.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <asm/arch/mxc_hdmi.h>
 #include <asm/arch/crm_regs.h>
 #include <linux/fb.h>
 #include <ipu_pixfmt.h>
 #include <asm/io.h>
 #include <asm/arch/sys_proto.h>
 #include <pwm.h>
 #include <micrel.h>
 #include <spi.h>
 #include <video.h>
 #include <../drivers/video/imx/ipu.h>
 #if defined(CONFIG_VIDEO_BMP_LOGO)
 	#include <bmp_logo.h>
 #endif

 #define USDHC2_PAD_CTRL (PAD_CTL_SPEED_LOW |			\
 	PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)

 #if (CONFIG_SYS_BOARD_VERSION == 2)
 	/* 4.3 display controller */
 	#define ECSPI1_CS0		IMX_GPIO_NR(4, 9)
 	#define ECSPI4_CS0		IMX_GPIO_NR(3, 29)
 #elif (CONFIG_SYS_BOARD_VERSION == 3)
 	#define ECSPI1_CS0		IMX_GPIO_NR(2, 30)   /* NOR flash */
 	/* 4.3 display controller */
 	#define ECSPI1_CS1		IMX_GPIO_NR(4, 10)
 #endif

 #define SOFT_RESET_GPIO		IMX_GPIO_NR(7, 13)
 #define SD2_DRIVER_ENABLE	IMX_GPIO_NR(7, 8)

 struct i2c_pads_info i2c_pad_info3 = {
 	.scl = {
 		.i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC,
 		.gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 | PC,
 		.gp = IMX_GPIO_NR(1, 5)
 	},
 	.sda = {
 		.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA | PC,
 		.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 | PC,
 		.gp = IMX_GPIO_NR(1, 6)
 	}
 };

 struct i2c_pads_info i2c_pad_info4 = {
 	.scl = {
 		.i2c_mode = MX6_PAD_GPIO_7__I2C4_SCL | PC,
 		.gpio_mode = MX6_PAD_GPIO_7__GPIO1_IO07 | PC,
 		.gp = IMX_GPIO_NR(1, 7)
 	},
 	.sda = {
 		.i2c_mode = MX6_PAD_GPIO_8__I2C4_SDA | PC,
 		.gpio_mode = MX6_PAD_GPIO_8__GPIO1_IO08 | PC,
 		.gp = IMX_GPIO_NR(1, 8)
 	}
 };

 iomux_v3_cfg_t const uart1_pads[] = {
 	MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6_PAD_EIM_D19__UART1_CTS_B    | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6_PAD_EIM_D20__UART1_RTS_B    | MUX_PAD_CTRL(UART_PAD_CTRL),
 };

 iomux_v3_cfg_t const uart2_pads[] = {
 	MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 };

 iomux_v3_cfg_t const uart3_pads[] = {
 	MX6_PAD_EIM_D24__UART3_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6_PAD_EIM_D25__UART3_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6_PAD_EIM_D31__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6_PAD_EIM_D23__UART3_CTS_B | MUX_PAD_CTRL(UART_PAD_CTRL),
 };

 iomux_v3_cfg_t const uart4_pads[] = {
 	MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 	MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
 };

 iomux_v3_cfg_t const gpio_pads[] = {
 	/* LED enable*/
 	MX6_PAD_ENET_CRS_DV__GPIO1_IO25 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* LED yellow */
 	MX6_PAD_NANDF_CS3__GPIO6_IO16 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* LED red */
 #if (CONFIG_SYS_BOARD_VERSION == 2)
 	MX6_PAD_EIM_EB0__GPIO2_IO28 | MUX_PAD_CTRL(NO_PAD_CTRL),
 #elif (CONFIG_SYS_BOARD_VERSION == 3)
 	MX6_PAD_EIM_WAIT__GPIO5_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL),
 #endif
 	/* LED green */
 	MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* LED blue */
 	MX6_PAD_EIM_EB1__GPIO2_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* spi flash WP protect */
 	MX6_PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* spi CS 0 */
 	MX6_PAD_EIM_D29__GPIO3_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* spi bus #2 SS driver enable */
 	MX6_PAD_EIM_A23__GPIO6_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* RST_LOC# PHY reset input (has pull-down!)*/
 	MX6_PAD_GPIO_18__GPIO7_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* SD 2 level shifter output enable */
 	MX6_PAD_SD3_RST__GPIO7_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* SD1 card detect input */
 	MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* SD1 write protect input */
 	MX6_PAD_DI0_PIN4__GPIO4_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* SD2 card detect input */
 	MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* SD2 write protect input */
 	MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* Touchscreen IRQ */
 	MX6_PAD_SD4_DAT1__GPIO2_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };

 static iomux_v3_cfg_t const misc_pads[] = {
 	/* USB_OTG_ID = GPIO1_24*/
 	MX6_PAD_ENET_RX_ER__USB_OTG_ID		| MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* H1 Power enable = GPIO1_0*/
 	MX6_PAD_GPIO_0__USB_H1_PWR		| MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* OTG Power enable = GPIO4_15*/
 	MX6_PAD_KEY_ROW4__USB_OTG_PWR		| MUX_PAD_CTRL(NO_PAD_CTRL),
 };

 iomux_v3_cfg_t const enet_pads[] = {
 	MX6_PAD_ENET_MDIO__ENET_MDIO		| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_ENET_MDC__ENET_MDC		| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_TXC__RGMII_TXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_TD0__RGMII_TD0	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_TD1__RGMII_TD1	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_TD2__RGMII_TD2	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_TD3__RGMII_TD3	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_RXC__RGMII_RXC	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_RD0__RGMII_RD0	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_RD1__RGMII_RD1	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_RD2__RGMII_RD2	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_RD3__RGMII_RD3	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL	| MUX_PAD_CTRL(ENET_PAD_CTRL),
 };

 static iomux_v3_cfg_t const backlight_pads[] = {
 	/* backlight PWM brightness control */
 	MX6_PAD_GPIO_9__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* backlight enable */
 	MX6_PAD_EIM_BCLK__GPIO6_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* LCD power enable */
 	MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };

 static iomux_v3_cfg_t const ecspi1_pads[] = {
 	MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
 	MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
 	MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
 #if (CONFIG_SYS_BOARD_VERSION == 2)
 	MX6_PAD_KEY_ROW1__GPIO4_IO09 | MUX_PAD_CTRL(SPI_PAD_CTRL),
 #elif (CONFIG_SYS_BOARD_VERSION == 3)
 	MX6_PAD_EIM_EB2__GPIO2_IO30  | MUX_PAD_CTRL(SPI_PAD_CTRL),
 	MX6_PAD_KEY_COL2__GPIO4_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
 #endif
 };

 static void setup_iomux_enet(void)
 {
 	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
 }

 #if (CONFIG_SYS_BOARD_VERSION == 2)
 iomux_v3_cfg_t const ecspi4_pads[] = {
 	MX6_PAD_EIM_D21__ECSPI4_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL),
 	MX6_PAD_EIM_D22__ECSPI4_MISO | MUX_PAD_CTRL(NO_PAD_CTRL),
 	MX6_PAD_EIM_D28__ECSPI4_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL),
 	MX6_PAD_EIM_A25__GPIO5_IO02  | MUX_PAD_CTRL(NO_PAD_CTRL),
 	MX6_PAD_EIM_D29__GPIO3_IO29  | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 #endif

 static iomux_v3_cfg_t const display_pads[] = {
 	MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(DISP_PAD_CTRL),
 	MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
 	MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02,
 	MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03,
 	MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
 	MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
 	MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
 	MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
 	MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
 	MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
 	MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
 	MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
 	MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
 	MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
 	MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
 	MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
 	MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
 	MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
 	MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
 	MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
 	MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16,
 	MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17,
 	MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18,
 	MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19,
 	MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20,
 	MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21,
 	MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22,
 	MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
 };

 int board_spi_cs_gpio(unsigned bus, unsigned cs)
 {
 	if (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS)
 #if (CONFIG_SYS_BOARD_VERSION == 2)
 		return IMX_GPIO_NR(5, 2);

 	if (bus == 0 && cs == 0)
 		return IMX_GPIO_NR(4, 9);
 #elif (CONFIG_SYS_BOARD_VERSION == 3)
 		return ECSPI1_CS0;

 	if (bus == 0 && cs == 1)
 		return ECSPI1_CS1;
 #endif
 	return -1;
 }

 static void setup_spi(void)
 {
 	int i;

 	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));

 #if (CONFIG_SYS_BOARD_VERSION == 2)
 	imx_iomux_v3_setup_multiple_pads(ecspi4_pads, ARRAY_SIZE(ecspi4_pads));
 #endif

 	for (i = 0; i < 4; i++)
 		enable_spi_clk(true, i);

 	gpio_direction_output(ECSPI1_CS0, 1);
 #if (CONFIG_SYS_BOARD_VERSION == 2)
 	gpio_direction_output(ECSPI4_CS1, 0);
 	/* set cs0 to high (second device on spi bus #4) */
 	gpio_direction_output(ECSPI4_CS0, 1);
 #elif (CONFIG_SYS_BOARD_VERSION == 3)
 	gpio_direction_output(ECSPI1_CS1, 1);
 #endif
 }

 static void setup_iomux_uart(void)
 {
 	switch (CONFIG_MXC_UART_BASE) {
 	case UART1_BASE:
 		imx_iomux_v3_setup_multiple_pads(uart1_pads,
 						 ARRAY_SIZE(uart1_pads));
 		break;
 	case UART2_BASE:
 		imx_iomux_v3_setup_multiple_pads(uart2_pads,
 						 ARRAY_SIZE(uart2_pads));
 		break;
 	case UART3_BASE:
 		imx_iomux_v3_setup_multiple_pads(uart3_pads,
 						 ARRAY_SIZE(uart3_pads));
 		break;
 	case UART4_BASE:
 		imx_iomux_v3_setup_multiple_pads(uart4_pads,
 						 ARRAY_SIZE(uart4_pads));
 		break;
 	}
 }

 int board_phy_config(struct phy_device *phydev)
 {
 	/* control data pad skew - devaddr = 0x02, register = 0x04 */
 	ksz9031_phy_extended_write(phydev, 0x02,
 				   MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
 				   MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
 	/* rx data pad skew - devaddr = 0x02, register = 0x05 */
 	ksz9031_phy_extended_write(phydev, 0x02,
 				   MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
 				   MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
 	/* tx data pad skew - devaddr = 0x02, register = 0x06 */
 	ksz9031_phy_extended_write(phydev, 0x02,
 				   MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
 				   MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
 	/* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
 	ksz9031_phy_extended_write(phydev, 0x02,
 				   MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
 				   MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);

 	if (phydev->drv->config)
 		phydev->drv->config(phydev);

 	return 0;
 }

 int board_eth_init(bd_t *bis)
 {
 	setup_iomux_enet();
 	return cpu_eth_init(bis);
 }

 static int rotate_logo_one(unsigned char *out, unsigned char *in)
 {
 	int   i, j;

 	for (i = 0; i < BMP_LOGO_WIDTH; i++)
 		for (j = 0; j < BMP_LOGO_HEIGHT; j++)
 			out[j * BMP_LOGO_WIDTH + BMP_LOGO_HEIGHT - 1 - i] =
 			in[i * BMP_LOGO_WIDTH + j];
 	return 0;
 }

 /*
  * Rotate the BMP_LOGO (only)
  * Will only work, if the logo is square, as
  * BMP_LOGO_HEIGHT and BMP_LOGO_WIDTH are defines, not variables
  */
 void rotate_logo(int rotations)
 {
 	unsigned char out_logo[BMP_LOGO_WIDTH * BMP_LOGO_HEIGHT];
 	unsigned char *in_logo;
 	int   i, j;

 	if (BMP_LOGO_WIDTH != BMP_LOGO_HEIGHT)
 		return;

 	in_logo = bmp_logo_bitmap;

 	/* one 90 degree rotation */
 	if (rotations == 1  ||  rotations == 2  ||  rotations == 3)
 		rotate_logo_one(out_logo, in_logo);

 	/* second 90 degree rotation */
 	if (rotations == 2  ||  rotations == 3)
 		rotate_logo_one(in_logo, out_logo);

 	/* third 90 degree rotation */
 	if (rotations == 3)
 		rotate_logo_one(out_logo, in_logo);

 	/* copy result back to original array */
 	if (rotations == 1  ||  rotations == 3)
 		for (i = 0; i < BMP_LOGO_WIDTH; i++)
 			for (j = 0; j < BMP_LOGO_HEIGHT; j++)
 				in_logo[i * BMP_LOGO_WIDTH + j] =
 				out_logo[i * BMP_LOGO_WIDTH + j];
 }

 static void enable_display_power(void)
 {
 	imx_iomux_v3_setup_multiple_pads(backlight_pads,
 					 ARRAY_SIZE(backlight_pads));

 	/* backlight enable */
 	gpio_direction_output(IMX_GPIO_NR(6, 31), 1);
 	/* LCD power enable */
 	gpio_direction_output(IMX_GPIO_NR(6, 15), 1);

 	/* enable backlight PWM 1 */
 	if (pwm_init(0, 0, 0))
 		goto error;
 	/* duty cycle 500ns, period: 3000ns */
 	if (pwm_config(0, 50000, 300000))
 		goto error;
 	if (pwm_enable(0))
 		goto error;
 	return;

 error:
 	puts("error init pwm for backlight\n");
 	return;
 }

 static void enable_lvds(struct display_info_t const *dev)
 {
 	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 	int reg;
 	s32 timeout = 100000;

 	/* set PLL5 clock */
 	reg = readl(&ccm->analog_pll_video);
 	reg |= BM_ANADIG_PLL_VIDEO_POWERDOWN;
 	writel(reg, &ccm->analog_pll_video);

 	/* set PLL5 to 232720000Hz */
 	reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
 	reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x26);
 	reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
 	reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0);
 	writel(reg, &ccm->analog_pll_video);

 	writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xC0238),
 	       &ccm->analog_pll_video_num);
 	writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xF4240),
 	       &ccm->analog_pll_video_denom);

 	reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
 	writel(reg, &ccm->analog_pll_video);

 	while (timeout--)
 		if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
 			break;
 	if (timeout < 0)
 		printf("Warning: video pll lock timeout!\n");

 	reg = readl(&ccm->analog_pll_video);
 	reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
 	reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
 	writel(reg, &ccm->analog_pll_video);

 	/* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */
 	reg = readl(&ccm->cs2cdr);
 	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
 		 | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
 	reg |= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
 		| (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
 	writel(reg, &ccm->cs2cdr);

 	reg = readl(&ccm->cscmr2);
 	reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
 	writel(reg, &ccm->cscmr2);

 	reg = readl(&ccm->chsccdr);
 	reg |= (CHSCCDR_CLK_SEL_LDB_DI0
 		<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
 	writel(reg, &ccm->chsccdr);

 	reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
 	      | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
 	      | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH
 	      | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
 	      | IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
 	      | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
 	      | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
 	writel(reg, &iomux->gpr[2]);

 	reg = readl(&iomux->gpr[3]);
 	reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
 	       | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
 		  << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
 	writel(reg, &iomux->gpr[3]);

 	return;
 }

 static void enable_spi_display(struct display_info_t const *dev)
 {
 	struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
 	struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 	int reg;
 	s32 timeout = 100000;

 #if defined(CONFIG_VIDEO_BMP_LOGO)
 	rotate_logo(3);  /* portrait display in landscape mode */
 #endif

 	/*
 	 * set ldb clock to 28341000 Hz calculated through the formula:
 	 * (XRES + LEFT_M + RIGHT_M + HSYNC_LEN) *
 	 * (YRES + UPPER_M + LOWER_M + VSYNC_LEN) * REFRESH)
 	 * see:
 	 * https://community.freescale.com/thread/308170
 	 */
 	ipu_set_ldb_clock(28341000);

 	reg = readl(&ccm->cs2cdr);

 	/* select pll 5 clock */
 	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
 		| MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
 	writel(reg, &ccm->cs2cdr);

 	/* set PLL5 to 197994996Hz */
 	reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
 	reg |= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x21);
 	reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
 	reg |= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0);
 	writel(reg, &ccm->analog_pll_video);

 	writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xfbf4),
 	       &ccm->analog_pll_video_num);
 	writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xf4240),
 	       &ccm->analog_pll_video_denom);

 	reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
 	writel(reg, &ccm->analog_pll_video);

 	while (timeout--)
 		if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
 			break;
 	if (timeout < 0)
 		printf("Warning: video pll lock timeout!\n");

 	reg = readl(&ccm->analog_pll_video);
 	reg |= BM_ANADIG_PLL_VIDEO_ENABLE;
 	reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
 	writel(reg, &ccm->analog_pll_video);

 	/* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */
 	reg = readl(&ccm->cs2cdr);
 	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
 		 | MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
 	reg |= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
 		| (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
 	writel(reg, &ccm->cs2cdr);

 	reg = readl(&ccm->cscmr2);
 	reg |= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
 	writel(reg, &ccm->cscmr2);

 	reg = readl(&ccm->chsccdr);
 	reg |= (CHSCCDR_CLK_SEL_LDB_DI0
 		<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
 	reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK;
 	reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET);
 	reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK;
 	reg |= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
 	writel(reg, &ccm->chsccdr);

 	reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
 	      | IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
 	      | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH
 	      | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
 	      | IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
 	      | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
 	      | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
 	writel(reg, &iomux->gpr[2]);

 	reg = readl(&iomux->gpr[3]);
 	reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
 	       | (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
 		  << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
 	writel(reg, &iomux->gpr[3]);

 	imx_iomux_v3_setup_multiple_pads(
 		display_pads,
 		 ARRAY_SIZE(display_pads));

 	return;
 }
 static void setup_display(void)
 {
 	enable_ipu_clock();
 	enable_display_power();
 }

 static void setup_iomux_gpio(void)
 {
 	imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
 }

 static void set_gpr_register(void)
 {
 	struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;

 	writel(IOMUXC_GPR1_APP_CLK_REQ_N | IOMUXC_GPR1_PCIE_RDY_L23 |
 	       IOMUXC_GPR1_EXC_MON_SLVE |
 	       (2 << IOMUXC_GPR1_ADDRS0_OFFSET) |
 	       IOMUXC_GPR1_ACT_CS0,
 	       &iomuxc_regs->gpr[1]);
 	writel(0x0, &iomuxc_regs->gpr[8]);
 	writel(IOMUXC_GPR12_ARMP_IPG_CLK_EN | IOMUXC_GPR12_ARMP_AHB_CLK_EN |
 	       IOMUXC_GPR12_ARMP_ATB_CLK_EN | IOMUXC_GPR12_ARMP_APB_CLK_EN,
 	       &iomuxc_regs->gpr[12]);
 }

 int board_early_init_f(void)
 {
 	setup_iomux_uart();
 	setup_iomux_gpio();

 	gpio_direction_output(SOFT_RESET_GPIO, 1);
 	gpio_direction_output(SD2_DRIVER_ENABLE, 1);
 	setup_display();
 	set_gpr_register();
 	return 0;
 }

 static void setup_i2c4(void)
 {
 	setup_i2c(3, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
 		  &i2c_pad_info4);
 }

 static void setup_board_gpio(void)
 {
 	/* enable all LEDs */
 	gpio_request(IMX_GPIO_NR(2, 13), "LED ena"); /* 25 */
 	gpio_direction_output(IMX_GPIO_NR(1, 25), 0);

 	/* switch off Status LEDs */
 #if (CONFIG_SYS_BOARD_VERSION == 2)
 	gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */
 	gpio_direction_output(IMX_GPIO_NR(6, 16), 1);
 	gpio_request(IMX_GPIO_NR(2, 28), "LED red"); /* 60 */
 	gpio_direction_output(IMX_GPIO_NR(2, 28), 1);
 	gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */
 	gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
 	gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */
 	gpio_direction_output(IMX_GPIO_NR(2, 29), 1);
 #elif (CONFIG_SYS_BOARD_VERSION == 3)
 	gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */
 	gpio_direction_output(IMX_GPIO_NR(6, 16), 0);
 	gpio_request(IMX_GPIO_NR(5, 0), "LED red"); /* 128 */
 	gpio_direction_output(IMX_GPIO_NR(5, 0), 0);
 	gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */
 	gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
 	gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */
 	gpio_direction_output(IMX_GPIO_NR(2, 29), 0);
 #endif
 }

 static void setup_board_spi(void)
 {
 	/* enable spi bus #2 SS drivers (and spi bus #4 SS1 for rev2b) */
 	gpio_direction_output(IMX_GPIO_NR(6, 6), 1);
 }

 int board_late_init(void)
 {
 	char *my_bootdelay;
 	char bootmode = 0;
 	char const *panel = env_get("panel");

 	/*
 	 * Check the boot-source. If booting from NOR Flash,
 	 * disable bootdelay
 	 */
 	gpio_request(IMX_GPIO_NR(7, 6), "bootsel0");
 	gpio_direction_input(IMX_GPIO_NR(7, 6));
 	gpio_request(IMX_GPIO_NR(7, 7), "bootsel1");
 	gpio_direction_input(IMX_GPIO_NR(7, 7));
 	gpio_request(IMX_GPIO_NR(7, 1), "bootsel2");
 	gpio_direction_input(IMX_GPIO_NR(7, 1));
 	bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 6)) ? 1 : 0) << 0;
 	bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 7)) ? 1 : 0) << 1;
 	bootmode |= (gpio_get_value(IMX_GPIO_NR(7, 1)) ? 1 : 0) << 2;

 	if (bootmode == 7) {
 		my_bootdelay = env_get("nor_bootdelay");
 		if (my_bootdelay != NULL)
 			env_set("bootdelay", my_bootdelay);
 		else
 			env_set("bootdelay", "-2");
 	}

 	/* if we have the lg panel, we can initialze it now */
 	if (panel)
 		if (!strcmp(panel, displays[1].mode.name))
 			lg4573_spi_startup(CONFIG_LG4573_BUS,
 					   CONFIG_LG4573_CS,
 					   10000000, SPI_MODE_0);

 	return 0;
 }
	// SPDX-License-Identifier: GPL-2.0+
	/*
	* (C) Copyright 2015
	* Heiko Schocher, DENX Software Engineering, hs@denx.de.
	*
	* Based on:
	* Copyright (C) 2012 Freescale Semiconductor, Inc.
	*
	* Author: Fabio Estevam <fabio.estevam@freescale.com>
	*/

	#include <asm/arch/clock.h>
	#include <asm/arch/imx-regs.h>
	#include <asm/arch/iomux.h>
	#include <asm/arch/mx6-pins.h>
	#include <linux/errno.h>
	#include <asm/gpio.h>
	#include <asm/mach-imx/iomux-v3.h>
	#include <asm/mach-imx/boot_mode.h>
	#include <asm/mach-imx/mxc_i2c.h>
	#include <asm/mach-imx/video.h>
	#include <mmc.h>
	#include <fsl_esdhc_imx.h>
	#include <miiphy.h>
	#include <netdev.h>
	#include <asm/arch/mxc_hdmi.h>
	#include <asm/arch/crm_regs.h>
	#include <linux/fb.h>
	#include <ipu_pixfmt.h>
	#include <asm/io.h>
	#include <asm/arch/sys_proto.h>
	#include <pwm.h>
	#include <micrel.h>
	#include <spi.h>
	#include <video.h>
	#include <../drivers/video/imx/ipu.h>
	#if defined(CONFIG_VIDEO_BMP_LOGO)
	#include <bmp_logo.h>
	#endif

	#define USDHC2_PAD_CTRL (PAD_CTL_SPEED_LOW \| \
	PAD_CTL_DSE_40ohm \| PAD_CTL_SRE_FAST)

	#if (CONFIG_SYS_BOARD_VERSION == 2)
	/* 4.3 display controller */
	#define ECSPI1_CS0 IMX_GPIO_NR(4, 9)
	#define ECSPI4_CS0 IMX_GPIO_NR(3, 29)
	#elif (CONFIG_SYS_BOARD_VERSION == 3)
	#define ECSPI1_CS0 IMX_GPIO_NR(2, 30) /* NOR flash */
	/* 4.3 display controller */
	#define ECSPI1_CS1 IMX_GPIO_NR(4, 10)
	#endif

	#define SOFT_RESET_GPIO IMX_GPIO_NR(7, 13)
	#define SD2_DRIVER_ENABLE IMX_GPIO_NR(7, 8)

	struct i2c_pads_info i2c_pad_info3 = {
	.scl = {
	.i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL \| PC,
	.gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 \| PC,
	.gp = IMX_GPIO_NR(1, 5)
	},
	.sda = {
	.i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA \| PC,
	.gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06 \| PC,
	.gp = IMX_GPIO_NR(1, 6)
	}
	};

	struct i2c_pads_info i2c_pad_info4 = {
	.scl = {
	.i2c_mode = MX6_PAD_GPIO_7__I2C4_SCL \| PC,
	.gpio_mode = MX6_PAD_GPIO_7__GPIO1_IO07 \| PC,
	.gp = IMX_GPIO_NR(1, 7)
	},
	.sda = {
	.i2c_mode = MX6_PAD_GPIO_8__I2C4_SDA \| PC,
	.gpio_mode = MX6_PAD_GPIO_8__GPIO1_IO08 \| PC,
	.gp = IMX_GPIO_NR(1, 8)
	}
	};

	iomux_v3_cfg_t const uart1_pads[] = {
	MX6_PAD_CSI0_DAT10__UART1_TX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL),
	MX6_PAD_CSI0_DAT11__UART1_RX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL),
	MX6_PAD_EIM_D19__UART1_CTS_B \| MUX_PAD_CTRL(UART_PAD_CTRL),
	MX6_PAD_EIM_D20__UART1_RTS_B \| MUX_PAD_CTRL(UART_PAD_CTRL),
	};

	iomux_v3_cfg_t const uart2_pads[] = {
	MX6_PAD_EIM_D26__UART2_TX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL),
	MX6_PAD_EIM_D27__UART2_RX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL),
	};

	iomux_v3_cfg_t const uart3_pads[] = {
	MX6_PAD_EIM_D24__UART3_TX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL),
	MX6_PAD_EIM_D25__UART3_RX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL),
	MX6_PAD_EIM_D31__UART3_RTS_B \| MUX_PAD_CTRL(UART_PAD_CTRL),
	MX6_PAD_EIM_D23__UART3_CTS_B \| MUX_PAD_CTRL(UART_PAD_CTRL),
	};

	iomux_v3_cfg_t const uart4_pads[] = {
	MX6_PAD_KEY_COL0__UART4_TX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL),
	MX6_PAD_KEY_ROW0__UART4_RX_DATA \| MUX_PAD_CTRL(UART_PAD_CTRL),
	};

	iomux_v3_cfg_t const gpio_pads[] = {
	/* LED enable*/
	MX6_PAD_ENET_CRS_DV__GPIO1_IO25 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* LED yellow */
	MX6_PAD_NANDF_CS3__GPIO6_IO16 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* LED red */
	#if (CONFIG_SYS_BOARD_VERSION == 2)
	MX6_PAD_EIM_EB0__GPIO2_IO28 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	#elif (CONFIG_SYS_BOARD_VERSION == 3)
	MX6_PAD_EIM_WAIT__GPIO5_IO00 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	#endif
	/* LED green */
	MX6_PAD_EIM_A24__GPIO5_IO04 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* LED blue */
	MX6_PAD_EIM_EB1__GPIO2_IO29 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* spi flash WP protect */
	MX6_PAD_SD4_DAT7__GPIO2_IO15 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* spi CS 0 */
	MX6_PAD_EIM_D29__GPIO3_IO29 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* spi bus #2 SS driver enable */
	MX6_PAD_EIM_A23__GPIO6_IO06 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* RST_LOC# PHY reset input (has pull-down!)*/
	MX6_PAD_GPIO_18__GPIO7_IO13 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* SD 2 level shifter output enable */
	MX6_PAD_SD3_RST__GPIO7_IO08 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* SD1 card detect input */
	MX6_PAD_ENET_RXD0__GPIO1_IO27 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* SD1 write protect input */
	MX6_PAD_DI0_PIN4__GPIO4_IO20 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* SD2 card detect input */
	MX6_PAD_GPIO_19__GPIO4_IO05 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* SD2 write protect input */
	MX6_PAD_SD4_DAT2__GPIO2_IO10 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* Touchscreen IRQ */
	MX6_PAD_SD4_DAT1__GPIO2_IO09 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	};

	static iomux_v3_cfg_t const misc_pads[] = {
	/* USB_OTG_ID = GPIO1_24*/
	MX6_PAD_ENET_RX_ER__USB_OTG_ID \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* H1 Power enable = GPIO1_0*/
	MX6_PAD_GPIO_0__USB_H1_PWR \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* OTG Power enable = GPIO4_15*/
	MX6_PAD_KEY_ROW4__USB_OTG_PWR \| MUX_PAD_CTRL(NO_PAD_CTRL),
	};

	iomux_v3_cfg_t const enet_pads[] = {
	MX6_PAD_ENET_MDIO__ENET_MDIO \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_ENET_MDC__ENET_MDC \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_TXC__RGMII_TXC \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_TD0__RGMII_TD0 \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_TD1__RGMII_TD1 \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_TD2__RGMII_TD2 \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_TD3__RGMII_TD3 \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_ENET_REF_CLK__ENET_TX_CLK \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_RXC__RGMII_RXC \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_RD0__RGMII_RD0 \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_RD1__RGMII_RD1 \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_RD2__RGMII_RD2 \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_RD3__RGMII_RD3 \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL \| MUX_PAD_CTRL(ENET_PAD_CTRL),
	};

	static iomux_v3_cfg_t const backlight_pads[] = {
	/* backlight PWM brightness control */
	MX6_PAD_GPIO_9__PWM1_OUT \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* backlight enable */
	MX6_PAD_EIM_BCLK__GPIO6_IO31 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	/* LCD power enable */
	MX6_PAD_NANDF_CS2__GPIO6_IO15 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	};

	static iomux_v3_cfg_t const ecspi1_pads[] = {
	MX6_PAD_EIM_D16__ECSPI1_SCLK \| MUX_PAD_CTRL(SPI_PAD_CTRL),
	MX6_PAD_EIM_D17__ECSPI1_MISO \| MUX_PAD_CTRL(SPI_PAD_CTRL),
	MX6_PAD_EIM_D18__ECSPI1_MOSI \| MUX_PAD_CTRL(SPI_PAD_CTRL),
	#if (CONFIG_SYS_BOARD_VERSION == 2)
	MX6_PAD_KEY_ROW1__GPIO4_IO09 \| MUX_PAD_CTRL(SPI_PAD_CTRL),
	#elif (CONFIG_SYS_BOARD_VERSION == 3)
	MX6_PAD_EIM_EB2__GPIO2_IO30 \| MUX_PAD_CTRL(SPI_PAD_CTRL),
	MX6_PAD_KEY_COL2__GPIO4_IO10 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	#endif
	};

	static void setup_iomux_enet(void)
	{
	imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
	}

	#if (CONFIG_SYS_BOARD_VERSION == 2)
	iomux_v3_cfg_t const ecspi4_pads[] = {
	MX6_PAD_EIM_D21__ECSPI4_SCLK \| MUX_PAD_CTRL(NO_PAD_CTRL),
	MX6_PAD_EIM_D22__ECSPI4_MISO \| MUX_PAD_CTRL(NO_PAD_CTRL),
	MX6_PAD_EIM_D28__ECSPI4_MOSI \| MUX_PAD_CTRL(NO_PAD_CTRL),
	MX6_PAD_EIM_A25__GPIO5_IO02 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	MX6_PAD_EIM_D29__GPIO3_IO29 \| MUX_PAD_CTRL(NO_PAD_CTRL),
	};
	#endif

	static iomux_v3_cfg_t const display_pads[] = {
	MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK \| MUX_PAD_CTRL(DISP_PAD_CTRL),
	MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
	MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02,
	MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03,
	MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
	MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
	MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
	MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
	MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
	MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
	MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
	MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
	MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
	MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
	MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
	MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
	MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
	MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
	MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
	MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
	MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16,
	MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17,
	MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18,
	MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19,
	MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20,
	MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21,
	MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22,
	MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
	};

	int board_spi_cs_gpio(unsigned bus, unsigned cs)
	{
	if (bus == CONFIG_SF_DEFAULT_BUS && cs == CONFIG_SF_DEFAULT_CS)
	#if (CONFIG_SYS_BOARD_VERSION == 2)
	return IMX_GPIO_NR(5, 2);

	if (bus == 0 && cs == 0)
	return IMX_GPIO_NR(4, 9);
	#elif (CONFIG_SYS_BOARD_VERSION == 3)
	return ECSPI1_CS0;

	if (bus == 0 && cs == 1)
	return ECSPI1_CS1;
	#endif
	return -1;
	}

	static void setup_spi(void)
	{
	int i;

	imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));

	#if (CONFIG_SYS_BOARD_VERSION == 2)
	imx_iomux_v3_setup_multiple_pads(ecspi4_pads, ARRAY_SIZE(ecspi4_pads));
	#endif

	for (i = 0; i < 4; i++)
	enable_spi_clk(true, i);

	gpio_direction_output(ECSPI1_CS0, 1);
	#if (CONFIG_SYS_BOARD_VERSION == 2)
	gpio_direction_output(ECSPI4_CS1, 0);
	/* set cs0 to high (second device on spi bus #4) */
	gpio_direction_output(ECSPI4_CS0, 1);
	#elif (CONFIG_SYS_BOARD_VERSION == 3)
	gpio_direction_output(ECSPI1_CS1, 1);
	#endif
	}

	static void setup_iomux_uart(void)
	{
	switch (CONFIG_MXC_UART_BASE) {
	case UART1_BASE:
	imx_iomux_v3_setup_multiple_pads(uart1_pads,
	ARRAY_SIZE(uart1_pads));
	break;
	case UART2_BASE:
	imx_iomux_v3_setup_multiple_pads(uart2_pads,
	ARRAY_SIZE(uart2_pads));
	break;
	case UART3_BASE:
	imx_iomux_v3_setup_multiple_pads(uart3_pads,
	ARRAY_SIZE(uart3_pads));
	break;
	case UART4_BASE:
	imx_iomux_v3_setup_multiple_pads(uart4_pads,
	ARRAY_SIZE(uart4_pads));
	break;
	}
	}

	int board_phy_config(struct phy_device *phydev)
	{
	/* control data pad skew - devaddr = 0x02, register = 0x04 */
	ksz9031_phy_extended_write(phydev, 0x02,
	MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
	MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
	/* rx data pad skew - devaddr = 0x02, register = 0x05 */
	ksz9031_phy_extended_write(phydev, 0x02,
	MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
	MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
	/* tx data pad skew - devaddr = 0x02, register = 0x06 */
	ksz9031_phy_extended_write(phydev, 0x02,
	MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
	MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000);
	/* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */
	ksz9031_phy_extended_write(phydev, 0x02,
	MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
	MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF);

	if (phydev->drv->config)
	phydev->drv->config(phydev);

	return 0;
	}

	int board_eth_init(bd_t *bis)
	{
	setup_iomux_enet();
	return cpu_eth_init(bis);
	}

	static int rotate_logo_one(unsigned char out, unsigned char in)
	{
	int i, j;

	for (i = 0; i < BMP_LOGO_WIDTH; i++)
	for (j = 0; j < BMP_LOGO_HEIGHT; j++)
	out[j * BMP_LOGO_WIDTH + BMP_LOGO_HEIGHT - 1 - i] =
	in[i * BMP_LOGO_WIDTH + j];
	return 0;
	}

	/*
	* Rotate the BMP_LOGO (only)
	* Will only work, if the logo is square, as
	* BMP_LOGO_HEIGHT and BMP_LOGO_WIDTH are defines, not variables
	*/
	void rotate_logo(int rotations)
	{
	unsigned char out_logo[BMP_LOGO_WIDTH * BMP_LOGO_HEIGHT];
	unsigned char *in_logo;
	int i, j;

	if (BMP_LOGO_WIDTH != BMP_LOGO_HEIGHT)
	return;

	in_logo = bmp_logo_bitmap;

	/* one 90 degree rotation */
	if (rotations == 1 \|\| rotations == 2 \|\| rotations == 3)
	rotate_logo_one(out_logo, in_logo);

	/* second 90 degree rotation */
	if (rotations == 2 \|\| rotations == 3)
	rotate_logo_one(in_logo, out_logo);

	/* third 90 degree rotation */
	if (rotations == 3)
	rotate_logo_one(out_logo, in_logo);

	/* copy result back to original array */
	if (rotations == 1 \|\| rotations == 3)
	for (i = 0; i < BMP_LOGO_WIDTH; i++)
	for (j = 0; j < BMP_LOGO_HEIGHT; j++)
	in_logo[i * BMP_LOGO_WIDTH + j] =
	out_logo[i * BMP_LOGO_WIDTH + j];
	}

	static void enable_display_power(void)
	{
	imx_iomux_v3_setup_multiple_pads(backlight_pads,
	ARRAY_SIZE(backlight_pads));

	/* backlight enable */
	gpio_direction_output(IMX_GPIO_NR(6, 31), 1);
	/* LCD power enable */
	gpio_direction_output(IMX_GPIO_NR(6, 15), 1);

	/* enable backlight PWM 1 */
	if (pwm_init(0, 0, 0))
	goto error;
	/* duty cycle 500ns, period: 3000ns */
	if (pwm_config(0, 50000, 300000))
	goto error;
	if (pwm_enable(0))
	goto error;
	return;

	error:
	puts("error init pwm for backlight\n");
	return;
	}

	static void enable_lvds(struct display_info_t const *dev)
	{
	struct iomuxc iomux = (struct iomuxc )IOMUXC_BASE_ADDR;
	struct mxc_ccm_reg ccm = (struct mxc_ccm_reg )CCM_BASE_ADDR;
	int reg;
	s32 timeout = 100000;

	/* set PLL5 clock */
	reg = readl(&ccm->analog_pll_video);
	reg \|= BM_ANADIG_PLL_VIDEO_POWERDOWN;
	writel(reg, &ccm->analog_pll_video);

	/* set PLL5 to 232720000Hz */
	reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
	reg \|= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x26);
	reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
	reg \|= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0);
	writel(reg, &ccm->analog_pll_video);

	writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xC0238),
	&ccm->analog_pll_video_num);
	writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xF4240),
	&ccm->analog_pll_video_denom);

	reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
	writel(reg, &ccm->analog_pll_video);

	while (timeout--)
	if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
	break;
	if (timeout < 0)
	printf("Warning: video pll lock timeout!\n");

	reg = readl(&ccm->analog_pll_video);
	reg \|= BM_ANADIG_PLL_VIDEO_ENABLE;
	reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
	writel(reg, &ccm->analog_pll_video);

	/* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */
	reg = readl(&ccm->cs2cdr);
	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
	\| MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
	reg \|= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
	\| (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
	writel(reg, &ccm->cs2cdr);

	reg = readl(&ccm->cscmr2);
	reg \|= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
	writel(reg, &ccm->cscmr2);

	reg = readl(&ccm->chsccdr);
	reg \|= (CHSCCDR_CLK_SEL_LDB_DI0
	<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
	writel(reg, &ccm->chsccdr);

	reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
	\| IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
	\| IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH
	\| IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
	\| IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
	\| IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
	\| IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
	writel(reg, &iomux->gpr[2]);

	reg = readl(&iomux->gpr[3]);
	reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
	\| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
	<< IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
	writel(reg, &iomux->gpr[3]);

	return;
	}

	static void enable_spi_display(struct display_info_t const *dev)
	{
	struct iomuxc iomux = (struct iomuxc )IOMUXC_BASE_ADDR;
	struct mxc_ccm_reg ccm = (struct mxc_ccm_reg )CCM_BASE_ADDR;
	int reg;
	s32 timeout = 100000;

	#if defined(CONFIG_VIDEO_BMP_LOGO)
	rotate_logo(3); /* portrait display in landscape mode */
	#endif

	/*
	* set ldb clock to 28341000 Hz calculated through the formula:
	* (XRES + LEFT_M + RIGHT_M + HSYNC_LEN) *
	* (YRES + UPPER_M + LOWER_M + VSYNC_LEN) * REFRESH)
	* see:
	* https://community.freescale.com/thread/308170
	*/
	ipu_set_ldb_clock(28341000);

	reg = readl(&ccm->cs2cdr);

	/* select pll 5 clock */
	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
	\| MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
	writel(reg, &ccm->cs2cdr);

	/* set PLL5 to 197994996Hz */
	reg &= ~BM_ANADIG_PLL_VIDEO_DIV_SELECT;
	reg \|= BF_ANADIG_PLL_VIDEO_DIV_SELECT(0x21);
	reg &= ~BM_ANADIG_PLL_VIDEO_POST_DIV_SELECT;
	reg \|= BF_ANADIG_PLL_VIDEO_POST_DIV_SELECT(0);
	writel(reg, &ccm->analog_pll_video);

	writel(BF_ANADIG_PLL_VIDEO_NUM_A(0xfbf4),
	&ccm->analog_pll_video_num);
	writel(BF_ANADIG_PLL_VIDEO_DENOM_B(0xf4240),
	&ccm->analog_pll_video_denom);

	reg &= ~BM_ANADIG_PLL_VIDEO_POWERDOWN;
	writel(reg, &ccm->analog_pll_video);

	while (timeout--)
	if (readl(&ccm->analog_pll_video) & BM_ANADIG_PLL_VIDEO_LOCK)
	break;
	if (timeout < 0)
	printf("Warning: video pll lock timeout!\n");

	reg = readl(&ccm->analog_pll_video);
	reg \|= BM_ANADIG_PLL_VIDEO_ENABLE;
	reg &= ~BM_ANADIG_PLL_VIDEO_BYPASS;
	writel(reg, &ccm->analog_pll_video);

	/* set LDB0, LDB1 clk select to 000/000 (PLL5 clock) */
	reg = readl(&ccm->cs2cdr);
	reg &= ~(MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK
	\| MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK);
	reg \|= (0 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET)
	\| (0 << MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_OFFSET);
	writel(reg, &ccm->cs2cdr);

	reg = readl(&ccm->cscmr2);
	reg \|= MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV;
	writel(reg, &ccm->cscmr2);

	reg = readl(&ccm->chsccdr);
	reg \|= (CHSCCDR_CLK_SEL_LDB_DI0
	<< MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET);
	reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PODF_MASK;
	reg \|= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PODF_OFFSET);
	reg &= ~MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_MASK;
	reg \|= (2 << MXC_CCM_CHSCCDR_IPU1_DI0_PRE_CLK_SEL_OFFSET);
	writel(reg, &ccm->chsccdr);

	reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
	\| IOMUXC_GPR2_DI1_VS_POLARITY_ACTIVE_HIGH
	\| IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_HIGH
	\| IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
	\| IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT
	\| IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
	\| IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
	writel(reg, &iomux->gpr[2]);

	reg = readl(&iomux->gpr[3]);
	reg = (reg & ~IOMUXC_GPR3_LVDS0_MUX_CTL_MASK)
	\| (IOMUXC_GPR3_MUX_SRC_IPU1_DI0
	<< IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
	writel(reg, &iomux->gpr[3]);

	imx_iomux_v3_setup_multiple_pads(
	display_pads,
	ARRAY_SIZE(display_pads));

	return;
	}
	static void setup_display(void)
	{
	enable_ipu_clock();
	enable_display_power();
	}

	static void setup_iomux_gpio(void)
	{
	imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
	}

	static void set_gpr_register(void)
	{
	struct iomuxc iomuxc_regs = (struct iomuxc )IOMUXC_BASE_ADDR;

	writel(IOMUXC_GPR1_APP_CLK_REQ_N \| IOMUXC_GPR1_PCIE_RDY_L23 \|
	IOMUXC_GPR1_EXC_MON_SLVE \|
	(2 << IOMUXC_GPR1_ADDRS0_OFFSET) \|
	IOMUXC_GPR1_ACT_CS0,
	&iomuxc_regs->gpr[1]);
	writel(0x0, &iomuxc_regs->gpr[8]);
	writel(IOMUXC_GPR12_ARMP_IPG_CLK_EN \| IOMUXC_GPR12_ARMP_AHB_CLK_EN \|
	IOMUXC_GPR12_ARMP_ATB_CLK_EN \| IOMUXC_GPR12_ARMP_APB_CLK_EN,
	&iomuxc_regs->gpr[12]);
	}

	int board_early_init_f(void)
	{
	setup_iomux_uart();
	setup_iomux_gpio();

	gpio_direction_output(SOFT_RESET_GPIO, 1);
	gpio_direction_output(SD2_DRIVER_ENABLE, 1);
	setup_display();
	set_gpr_register();
	return 0;
	}

	static void setup_i2c4(void)
	{
	setup_i2c(3, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
	&i2c_pad_info4);
	}

	static void setup_board_gpio(void)
	{
	/* enable all LEDs */
	gpio_request(IMX_GPIO_NR(2, 13), "LED ena"); /* 25 */
	gpio_direction_output(IMX_GPIO_NR(1, 25), 0);

	/* switch off Status LEDs */
	#if (CONFIG_SYS_BOARD_VERSION == 2)
	gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */
	gpio_direction_output(IMX_GPIO_NR(6, 16), 1);
	gpio_request(IMX_GPIO_NR(2, 28), "LED red"); /* 60 */
	gpio_direction_output(IMX_GPIO_NR(2, 28), 1);
	gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */
	gpio_direction_output(IMX_GPIO_NR(5, 4), 1);
	gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */
	gpio_direction_output(IMX_GPIO_NR(2, 29), 1);
	#elif (CONFIG_SYS_BOARD_VERSION == 3)
	gpio_request(IMX_GPIO_NR(6, 16), "LED yellow"); /* 176 */
	gpio_direction_output(IMX_GPIO_NR(6, 16), 0);
	gpio_request(IMX_GPIO_NR(5, 0), "LED red"); /* 128 */
	gpio_direction_output(IMX_GPIO_NR(5, 0), 0);
	gpio_request(IMX_GPIO_NR(5, 4), "LED green"); /* 132 */
	gpio_direction_output(IMX_GPIO_NR(5, 4), 0);
	gpio_request(IMX_GPIO_NR(2, 29), "LED blue"); /* 61 */
	gpio_direction_output(IMX_GPIO_NR(2, 29), 0);
	#endif
	}

	static void setup_board_spi(void)
	{
	/* enable spi bus #2 SS drivers (and spi bus #4 SS1 for rev2b) */
	gpio_direction_output(IMX_GPIO_NR(6, 6), 1);
	}

	int board_late_init(void)
	{
	char *my_bootdelay;
	char bootmode = 0;
	char const *panel = env_get("panel");

	/*
	* Check the boot-source. If booting from NOR Flash,
	* disable bootdelay
	*/
	gpio_request(IMX_GPIO_NR(7, 6), "bootsel0");
	gpio_direction_input(IMX_GPIO_NR(7, 6));
	gpio_request(IMX_GPIO_NR(7, 7), "bootsel1");
	gpio_direction_input(IMX_GPIO_NR(7, 7));
	gpio_request(IMX_GPIO_NR(7, 1), "bootsel2");
	gpio_direction_input(IMX_GPIO_NR(7, 1));
	bootmode \|= (gpio_get_value(IMX_GPIO_NR(7, 6)) ? 1 : 0) << 0;
	bootmode \|= (gpio_get_value(IMX_GPIO_NR(7, 7)) ? 1 : 0) << 1;
	bootmode \|= (gpio_get_value(IMX_GPIO_NR(7, 1)) ? 1 : 0) << 2;

	if (bootmode == 7) {
	my_bootdelay = env_get("nor_bootdelay");
	if (my_bootdelay != NULL)
	env_set("bootdelay", my_bootdelay);
	else
	env_set("bootdelay", "-2");
	}

	/* if we have the lg panel, we can initialze it now */
	if (panel)
	if (!strcmp(panel, displays[1].mode.name))
	lg4573_spi_startup(CONFIG_LG4573_BUS,
	CONFIG_LG4573_CS,
	10000000, SPI_MODE_0);

	return 0;
	}