| CONFIG_ARM=y |
| CONFIG_ARCH_OMAP2PLUS=y |
| CONFIG_SYS_TEXT_BASE=0x80100000 |
| CONFIG_TI_COMMON_CMD_OPTIONS=y |
| # CONFIG_SPL_GPIO_SUPPORT is not set |
| CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| CONFIG_TARGET_OMAP3_LOGIC=y |
| # CONFIG_SPL_OMAP3_ID_NAND is not set |
| CONFIG_SPL=y |
| CONFIG_DISTRO_DEFAULTS=y |
| CONFIG_NR_DRAM_BANKS=2 |
| CONFIG_ANDROID_BOOT_IMAGE=y |
| # CONFIG_USE_BOOTCOMMAND is not set |
| CONFIG_SYS_CONSOLE_INFO_QUIET=y |
| CONFIG_VERSION_VARIABLE=y |
| CONFIG_SPL_SYS_MALLOC_SIMPLE=y |
| CONFIG_SPL_MTD_SUPPORT=y |
| CONFIG_SPL_OS_BOOT=y |
| CONFIG_SYS_PROMPT="OMAP Logic # " |
| # CONFIG_CMD_IMI is not set |
| CONFIG_CMD_SPL=y |
| CONFIG_CMD_SPL_NAND_OFS=0x240000 |
| CONFIG_CMD_SPL_WRITE_SIZE=0x20000 |
| # CONFIG_CMD_FLASH is not set |
| CONFIG_CMD_NAND=y |
| CONFIG_CMD_NAND_LOCK_UNLOCK=y |
| CONFIG_CMD_CACHE=y |
| CONFIG_CMD_MTDPARTS=y |
| CONFIG_MTDIDS_DEFAULT="nand0=omap2-nand.0" |
| CONFIG_MTDPARTS_DEFAULT="mtdparts=omap2-nand.0:512k(MLO),1792k(u-boot),128k(spl-os),128k(u-boot-env),6m(kernel),-(fs)" |
| CONFIG_CMD_UBI=y |
| CONFIG_OF_CONTROL=y |
| CONFIG_DEFAULT_DEVICE_TREE="logicpd-torpedo-37xx-devkit" |
| # CONFIG_ENV_IS_IN_FAT is not set |
| CONFIG_ENV_IS_IN_NAND=y |
| CONFIG_SPL_DM=y |
| CONFIG_SPL_DM_SEQ_ALIAS=y |
| CONFIG_DM_I2C=y |
| CONFIG_DM_MMC=y |
| CONFIG_MMC_OMAP_HS=y |
| CONFIG_MMC_OMAP36XX_PINS=y |
| CONFIG_NAND=y |
| CONFIG_SYS_NAND_BUSWIDTH_16BIT=y |
| CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y |
| CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 |
| CONFIG_SPL_NAND_SIMPLE=y |
| CONFIG_SMC911X=y |
| CONFIG_SMC911X_BASE=0x08000000 |
| CONFIG_SMC911X_32_BIT=y |
| CONFIG_PINCTRL=y |
| CONFIG_PINCTRL_SINGLE=y |
| CONFIG_DM_PMIC=y |
| # CONFIG_SPL_PMIC_CHILDREN is not set |
| CONFIG_DM_REGULATOR=y |
| CONFIG_DM_REGULATOR_FIXED=y |
| CONFIG_DM_REGULATOR_GPIO=y |
| CONFIG_SPECIFY_CONSOLE_INDEX=y |
| CONFIG_SPI=y |
| CONFIG_DM_SPI=y |
| CONFIG_OMAP3_SPI=y |
| CONFIG_USB=y |
| CONFIG_DM_USB=y |
| # CONFIG_SPL_DM_USB is not set |
| CONFIG_USB_EHCI_HCD=y |
| CONFIG_USB_MUSB_HOST=y |
| CONFIG_USB_MUSB_OMAP2PLUS=y |
| CONFIG_TWL4030_USB=y |
| CONFIG_BCH=y |