| /* |
| * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| /* |
| MPC8349E-mITX and MPC8349E-mITX-GP board configuration file |
| |
| Memory map: |
| |
| 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) |
| 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) |
| 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) |
| 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) |
| 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) |
| 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) |
| 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only) |
| 0xF001_0000-0xF001_FFFF Local bus expansion slot |
| 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only) |
| 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory |
| 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only) |
| |
| I2C address list: |
| Align. Board |
| Bus Addr Part No. Description Length Location |
| ---------------------------------------------------------------- |
| I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 |
| |
| I2C1 0x20 PCF8574 I2C Expander 0 U8 |
| I2C1 0x21 PCF8574 I2C Expander 0 U10 |
| I2C1 0x38 PCF8574A I2C Expander 0 U8 |
| I2C1 0x39 PCF8574A I2C Expander 0 U10 |
| I2C1 0x51 (DDR) DDR EEPROM 1 U1 |
| I2C1 0x68 DS1339 RTC 1 U68 |
| |
| Note that a given board has *either* a pair of 8574s or a pair of 8574As. |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #if (TEXT_BASE == 0xFE000000) |
| #define CFG_LOWBOOT |
| #endif |
| |
| /* |
| * High Level Configuration Options |
| */ |
| #define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */ |
| #define CONFIG_MPC8349 /* MPC8349 specific */ |
| |
| #define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ |
| |
| #define CONFIG_MISC_INIT_F |
| #define CONFIG_MISC_INIT_R |
| |
| /* |
| * On-board devices |
| */ |
| |
| #ifdef CONFIG_MPC8349ITX |
| #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ |
| #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ |
| #endif |
| |
| #define CONFIG_PCI |
| #define CONFIG_RTC_DS1337 |
| #define CONFIG_HARD_I2C |
| #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ |
| |
| /* |
| * Device configurations |
| */ |
| |
| /* I2C */ |
| #ifdef CONFIG_HARD_I2C |
| |
| #define CONFIG_FSL_I2C |
| #define CONFIG_I2C_MULTI_BUS |
| #define CONFIG_I2C_CMD_TREE |
| #define CFG_I2C_OFFSET 0x3000 |
| #define CFG_I2C2_OFFSET 0x3100 |
| #define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */ |
| |
| #define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ |
| #define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ |
| #define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ |
| #define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ |
| #define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ |
| #define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ |
| #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ |
| |
| #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ |
| #define CFG_I2C_SLAVE 0x7F |
| |
| /* Don't probe these addresses: */ |
| #define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \ |
| {1, CFG_I2C_8574_ADDR2}, \ |
| {1, CFG_I2C_8574A_ADDR1}, \ |
| {1, CFG_I2C_8574A_ADDR2}} |
| /* Bit definitions for the 8574[A] I2C expander */ |
| #define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ |
| #define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ |
| #define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ |
| #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ |
| #define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ |
| |
| #undef CONFIG_SOFT_I2C |
| |
| #endif |
| |
| /* Compact Flash */ |
| #ifdef CONFIG_COMPACT_FLASH |
| |
| #define CFG_IDE_MAXBUS 1 |
| #define CFG_IDE_MAXDEVICE 1 |
| |
| #define CFG_ATA_IDE0_OFFSET 0x0000 |
| #define CFG_ATA_BASE_ADDR CFG_CF_BASE |
| #define CFG_ATA_DATA_OFFSET 0x0000 |
| #define CFG_ATA_REG_OFFSET 0 |
| #define CFG_ATA_ALT_OFFSET 0x0200 |
| #define CFG_ATA_STRIDE 2 |
| |
| #define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ |
| |
| #define CONFIG_DOS_PARTITION |
| |
| #endif |
| |
| /* |
| * DDR Setup |
| */ |
| #define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ |
| #define CFG_SDRAM_BASE CFG_DDR_BASE |
| #define CFG_DDR_SDRAM_BASE CFG_DDR_BASE |
| #define CFG_83XX_DDR_USES_CS0 |
| #define CFG_MEMTEST_START 0x1000 /* memtest region */ |
| #define CFG_MEMTEST_END 0x2000 |
| |
| #define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ |
| DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) |
| |
| #ifdef CONFIG_HARD_I2C |
| #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ |
| #endif |
| |
| #ifndef CONFIG_SPD_EEPROM /* No SPD? Then manually set up DDR parameters */ |
| #define CFG_DDR_SIZE 256 /* Mb */ |
| #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) |
| |
| #define CFG_DDR_TIMING_1 0x26242321 |
| #define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ |
| #endif |
| |
| /* |
| *Flash on the Local Bus |
| */ |
| |
| #define CFG_FLASH_CFI /* use the Common Flash Interface */ |
| #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ |
| #define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ |
| #define CFG_FLASH_EMPTY_INFO |
| #define CFG_MAX_FLASH_SECT 135 /* 127 64KB sectors + 8 8KB sectors per device */ |
| #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ |
| #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ |
| #define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT |
| |
| /* The ITX has two flash chips, but the ITX-GP has only one. To support both |
| boards, we say we have two, but don't display a message if we find only one. */ |
| #define CFG_FLASH_QUIET_TEST |
| #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ |
| #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000} |
| #define CFG_FLASH_SIZE 16 /* FLASH size in MB */ |
| #define CFG_FLASH_SIZE_SHIFT 4 /* log2 of the above value */ |
| |
| /* Vitesse 7385 */ |
| |
| #ifdef CONFIG_VSC7385_ENET |
| |
| #define CONFIG_TSEC2 |
| |
| /* The flash address and size of the VSC7385 firmware image */ |
| #define CONFIG_VSC7385_IMAGE 0xFEFFE000 |
| #define CONFIG_VSC7385_IMAGE_SIZE 8192 |
| |
| #endif |
| |
| /* |
| * BRx, ORx, LBLAWBARx, and LBLAWARx |
| */ |
| |
| /* Flash */ |
| |
| #define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) |
| #define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ |
| OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ |
| OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) |
| #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE |
| #define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT)) |
| |
| /* Vitesse 7385 */ |
| |
| #define CFG_VSC7385_BASE 0xF8000000 |
| |
| #ifdef CONFIG_VSC7385_ENET |
| |
| #define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V) |
| #define CFG_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ |
| OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \ |
| OR_GPCM_EHTR | OR_GPCM_EAD) |
| |
| #define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE |
| #define CFG_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) |
| |
| #endif |
| |
| /* LED */ |
| |
| #define CFG_LED_BASE 0xF9000000 |
| #define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V) |
| #define CFG_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_DIV2 | \ |
| OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \ |
| OR_GPCM_EHTR | OR_GPCM_EAD) |
| |
| /* Compact Flash */ |
| |
| #ifdef CONFIG_COMPACT_FLASH |
| |
| #define CFG_CF_BASE 0xF0000000 |
| |
| #define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) |
| #define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) |
| |
| #define CFG_LBLAWBAR3_PRELIM CFG_CF_BASE |
| #define CFG_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) |
| |
| #endif |
| |
| /* |
| * U-Boot memory configuration |
| */ |
| #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ |
| |
| #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) |
| #define CFG_RAMBOOT |
| #else |
| #undef CFG_RAMBOOT |
| #endif |
| |
| #define CONFIG_L1_INIT_RAM |
| #define CFG_INIT_RAM_LOCK |
| #define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ |
| #define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ |
| |
| #define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ |
| #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) |
| #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET |
| |
| /* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ |
| #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ |
| #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ |
| |
| /* |
| * Local Bus LCRR and LBCR regs |
| * LCRR: DLL bypass, Clock divider is 4 |
| * External Local Bus rate is |
| * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV |
| */ |
| #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) |
| #define CFG_LBC_LBCR 0x00000000 |
| |
| #define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ |
| #define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ |
| |
| /* |
| * Serial Port |
| */ |
| #define CONFIG_CONS_INDEX 1 |
| #undef CONFIG_SERIAL_SOFTWARE_FIFO |
| #define CFG_NS16550 |
| #define CFG_NS16550_SERIAL |
| #define CFG_NS16550_REG_SIZE 1 |
| #define CFG_NS16550_CLK get_bus_freq(0) |
| |
| #define CFG_BAUDRATE_TABLE \ |
| {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} |
| |
| #define CONFIG_CONSOLE ttyS0 |
| #define CONFIG_BAUDRATE 115200 |
| |
| #define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) |
| #define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) |
| |
| /* pass open firmware flat tree */ |
| #define CONFIG_OF_LIBFDT 1 |
| #define CONFIG_OF_BOARD_SETUP 1 |
| #define CONFIG_OF_STDOUT_VIA_ALIAS 1 |
| |
| /* |
| * PCI |
| */ |
| #ifdef CONFIG_PCI |
| |
| #define CONFIG_MPC83XX_PCI2 |
| |
| /* |
| * General PCI |
| * Addresses are mapped 1-1. |
| */ |
| #define CFG_PCI1_MEM_BASE 0x80000000 |
| #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE |
| #define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ |
| #define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE) |
| #define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE |
| #define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ |
| #define CFG_PCI1_IO_BASE 0x00000000 |
| #define CFG_PCI1_IO_PHYS 0xE2000000 |
| #define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */ |
| |
| #ifdef CONFIG_MPC83XX_PCI2 |
| #define CFG_PCI2_MEM_BASE (CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE) |
| #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE |
| #define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ |
| #define CFG_PCI2_MMIO_BASE (CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE) |
| #define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE |
| #define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ |
| #define CFG_PCI2_IO_BASE 0x00000000 |
| #define CFG_PCI2_IO_PHYS (CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE) |
| #define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */ |
| #endif |
| |
| #define _IO_BASE 0x00000000 /* points to PCI I/O space */ |
| |
| #define CONFIG_NET_MULTI |
| #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| |
| #ifdef CONFIG_RTL8139 |
| /* This macro is used by RTL8139 but not defined in PPC architecture */ |
| #define KSEG1ADDR(x) (x) |
| #endif |
| |
| #ifndef CONFIG_PCI_PNP |
| #define PCI_ENET0_IOADDR 0x00000000 |
| #define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE |
| #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ |
| #endif |
| |
| #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
| |
| #endif |
| |
| #define PCI_66M |
| #ifdef PCI_66M |
| #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ |
| #else |
| #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ |
| #endif |
| |
| /* TSEC */ |
| |
| #ifdef CONFIG_TSEC_ENET |
| |
| #define CONFIG_NET_MULTI |
| #define CONFIG_MII |
| #define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ |
| |
| #define CONFIG_TSEC1 |
| |
| #ifdef CONFIG_TSEC1 |
| #define CONFIG_HAS_ETH0 |
| #define CONFIG_TSEC1_NAME "TSEC0" |
| #define CFG_TSEC1_OFFSET 0x24000 |
| #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ |
| #define TSEC1_PHYIDX 0 |
| #define TSEC1_FLAGS TSEC_GIGABIT |
| #endif |
| |
| #ifdef CONFIG_TSEC2 |
| #define CONFIG_HAS_ETH1 |
| #define CONFIG_TSEC2_NAME "TSEC1" |
| #define CFG_TSEC2_OFFSET 0x25000 |
| |
| #define TSEC2_PHY_ADDR 4 |
| #define TSEC2_PHYIDX 0 |
| #define TSEC2_FLAGS TSEC_GIGABIT |
| #endif |
| |
| #define CONFIG_ETHPRIME "Freescale TSEC" |
| |
| #endif |
| |
| /* |
| * Environment |
| */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #ifndef CFG_RAMBOOT |
| #define CFG_ENV_IS_IN_FLASH |
| #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) |
| #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ |
| #define CFG_ENV_SIZE 0x2000 |
| #else |
| #define CFG_NO_FLASH /* Flash is not usable now */ |
| #undef CFG_FLASH_CFI_DRIVER |
| #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */ |
| #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) |
| #define CFG_ENV_SIZE 0x2000 |
| #endif |
| |
| #define CONFIG_LOADS_ECHO /* echo on for serial download */ |
| #define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_IRQ |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_PING |
| #define CONFIG_CMD_SDRAM |
| |
| #ifdef CONFIG_COMPACT_FLASH |
| #define CONFIG_CMD_IDE |
| #define CONFIG_CMD_FAT |
| #endif |
| |
| #ifdef CONFIG_PCI |
| #define CONFIG_CMD_PCI |
| #endif |
| |
| #ifdef CONFIG_HARD_I2C |
| #define CONFIG_CMD_I2C |
| #endif |
| |
| /* Watchdog */ |
| #undef CONFIG_WATCHDOG /* watchdog disabled */ |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CFG_LONGHELP /* undef to save memory */ |
| #define CONFIG_CMDLINE_EDITING /* Command-line editing */ |
| #define CFG_HUSH_PARSER /* Use the HUSH parser */ |
| #define CFG_PROMPT_HUSH_PS2 "> " |
| |
| #define CFG_LOAD_ADDR 0x2000000 /* default load address */ |
| #define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ |
| |
| #ifdef CONFIG_MPC8349ITX |
| #define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ |
| #else |
| #define CFG_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ |
| #endif |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
| #else |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| #endif |
| |
| #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ |
| #define CFG_MAXARGS 16 /* max number of command args */ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ |
| |
| /* |
| * For booting Linux, the board info and command line data |
| * have to be in the first 8 MB of memory, since this is |
| * the maximum mapped by the Linux kernel during initialization. |
| */ |
| #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ |
| |
| #define CFG_HRCW_LOW (\ |
| HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ |
| HRCWL_DDR_TO_SCB_CLK_1X1 |\ |
| HRCWL_CSB_TO_CLKIN_4X1 |\ |
| HRCWL_VCO_1X2 |\ |
| HRCWL_CORE_TO_CSB_2X1) |
| |
| #ifdef CFG_LOWBOOT |
| #define CFG_HRCW_HIGH (\ |
| HRCWH_PCI_HOST |\ |
| HRCWH_32_BIT_PCI |\ |
| HRCWH_PCI1_ARBITER_ENABLE |\ |
| HRCWH_PCI2_ARBITER_ENABLE |\ |
| HRCWH_CORE_ENABLE |\ |
| HRCWH_FROM_0X00000100 |\ |
| HRCWH_BOOTSEQ_DISABLE |\ |
| HRCWH_SW_WATCHDOG_DISABLE |\ |
| HRCWH_ROM_LOC_LOCAL_16BIT |\ |
| HRCWH_TSEC1M_IN_GMII |\ |
| HRCWH_TSEC2M_IN_GMII ) |
| #else |
| #define CFG_HRCW_HIGH (\ |
| HRCWH_PCI_HOST |\ |
| HRCWH_32_BIT_PCI |\ |
| HRCWH_PCI1_ARBITER_ENABLE |\ |
| HRCWH_PCI2_ARBITER_ENABLE |\ |
| HRCWH_CORE_ENABLE |\ |
| HRCWH_FROM_0XFFF00100 |\ |
| HRCWH_BOOTSEQ_DISABLE |\ |
| HRCWH_SW_WATCHDOG_DISABLE |\ |
| HRCWH_ROM_LOC_LOCAL_16BIT |\ |
| HRCWH_TSEC1M_IN_GMII |\ |
| HRCWH_TSEC2M_IN_GMII ) |
| #endif |
| |
| /* |
| * System performance |
| */ |
| #define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ |
| #define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ |
| #define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ |
| #define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ |
| #define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ |
| #define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ |
| |
| /* |
| * System IO Config |
| */ |
| #define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ |
| #define CFG_SICRL (SICRL_LDP_A | SICRL_USB1) |
| |
| #define CFG_HID0_INIT 0x000000000 |
| #define CFG_HID0_FINAL CFG_HID0_INIT |
| |
| #define CFG_HID2 HID2_HBE |
| #define CONFIG_HIGH_BATS 1 /* High BATs supported */ |
| |
| /* DDR */ |
| #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) |
| #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| |
| /* PCI */ |
| #ifdef CONFIG_PCI |
| #define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) |
| #define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #else |
| #define CFG_IBAT1L 0 |
| #define CFG_IBAT1U 0 |
| #define CFG_IBAT2L 0 |
| #define CFG_IBAT2U 0 |
| #endif |
| |
| #ifdef CONFIG_MPC83XX_PCI2 |
| #define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) |
| #define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) |
| #else |
| #define CFG_IBAT3L 0 |
| #define CFG_IBAT3U 0 |
| #define CFG_IBAT4L 0 |
| #define CFG_IBAT4U 0 |
| #endif |
| |
| /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ |
| #define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) |
| #define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) |
| |
| /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ |
| #define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) |
| #define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) |
| |
| #define CFG_IBAT7L 0 |
| #define CFG_IBAT7U 0 |
| |
| #define CFG_DBAT0L CFG_IBAT0L |
| #define CFG_DBAT0U CFG_IBAT0U |
| #define CFG_DBAT1L CFG_IBAT1L |
| #define CFG_DBAT1U CFG_IBAT1U |
| #define CFG_DBAT2L CFG_IBAT2L |
| #define CFG_DBAT2U CFG_IBAT2U |
| #define CFG_DBAT3L CFG_IBAT3L |
| #define CFG_DBAT3U CFG_IBAT3U |
| #define CFG_DBAT4L CFG_IBAT4L |
| #define CFG_DBAT4U CFG_IBAT4U |
| #define CFG_DBAT5L CFG_IBAT5L |
| #define CFG_DBAT5U CFG_IBAT5U |
| #define CFG_DBAT6L CFG_IBAT6L |
| #define CFG_DBAT6U CFG_IBAT6U |
| #define CFG_DBAT7L CFG_IBAT7L |
| #define CFG_DBAT7U CFG_IBAT7U |
| |
| /* |
| * Internal Definitions |
| * |
| * Boot Flags |
| */ |
| #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ |
| #define BOOTFLAG_WARM 0x02 /* Software reboot */ |
| |
| #if defined(CONFIG_CMD_KGDB) |
| #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ |
| #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ |
| #endif |
| |
| |
| /* |
| * Environment Configuration |
| */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #ifdef CONFIG_HAS_ETH0 |
| #define CONFIG_ETHADDR 00:E0:0C:00:8C:01 |
| #endif |
| |
| #ifdef CONFIG_HAS_ETH1 |
| #define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 |
| #endif |
| |
| #define CONFIG_IPADDR 192.168.1.253 |
| #define CONFIG_SERVERIP 192.168.1.1 |
| #define CONFIG_GATEWAYIP 192.168.1.1 |
| #define CONFIG_NETMASK 255.255.252.0 |
| #define CONFIG_NETDEV eth0 |
| |
| #ifdef CONFIG_MPC8349ITX |
| #define CONFIG_HOSTNAME mpc8349emitx |
| #else |
| #define CONFIG_HOSTNAME mpc8349emitxgp |
| #endif |
| |
| /* Default path and filenames */ |
| #define CONFIG_ROOTPATH /nfsroot/rootfs |
| #define CONFIG_BOOTFILE uImage |
| #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ |
| |
| #ifdef CONFIG_MPC8349ITX |
| #define CONFIG_FDTFILE mpc8349emitx.dtb |
| #else |
| #define CONFIG_FDTFILE mpc8349emitxgp.dtb |
| #endif |
| |
| #define CONFIG_BOOTDELAY 0 |
| |
| #define XMK_STR(x) #x |
| #define MK_STR(x) XMK_STR(x) |
| |
| #define CONFIG_BOOTARGS \ |
| "root=/dev/nfs rw" \ |
| " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \ |
| " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ |
| MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ |
| MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ |
| " console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE) |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "console=" MK_STR(CONFIG_CONSOLE) "\0" \ |
| "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ |
| "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ |
| "tftpflash=tftpboot $loadaddr $uboot; " \ |
| "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ |
| "erase " MK_STR(TEXT_BASE) " +$filesize; " \ |
| "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ |
| "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ |
| "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ |
| "fdtaddr=400000\0" \ |
| "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" |
| |
| #define CONFIG_NFSBOOTCOMMAND \ |
| "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ |
| " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ |
| " console=$console,$baudrate $othbootargs; " \ |
| "tftp $loadaddr $bootfile;" \ |
| "tftp $fdtaddr $fdtfile;" \ |
| "bootm $loadaddr - $fdtaddr" |
| |
| #define CONFIG_RAMBOOTCOMMAND \ |
| "setenv bootargs root=/dev/ram rw" \ |
| " console=$console,$baudrate $othbootargs; " \ |
| "tftp $ramdiskaddr $ramdiskfile;" \ |
| "tftp $loadaddr $bootfile;" \ |
| "tftp $fdtaddr $fdtfile;" \ |
| "bootm $loadaddr $ramdiskaddr $fdtaddr" |
| |
| #undef MK_STR |
| #undef XMK_STR |
| |
| #endif |