| /* |
| * U-boot - Configuration file for BF537 STAMP board |
| */ |
| |
| #ifndef __CONFIG_BF527_EZKIT_H__ |
| #define __CONFIG_BF527_EZKIT_H__ |
| |
| #include <asm/config-pre.h> |
| |
| |
| /* |
| * Processor Settings |
| */ |
| #define CONFIG_BFIN_CPU bf527-0.0 |
| #define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA |
| |
| |
| /* |
| * Clock Settings |
| * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV |
| * SCLK = (CLKIN * VCO_MULT) / SCLK_DIV |
| */ |
| /* CONFIG_CLKIN_HZ is any value in Hz */ |
| #define CONFIG_CLKIN_HZ 25000000 |
| /* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ |
| /* 1 = CLKIN / 2 */ |
| #define CONFIG_CLKIN_HALF 0 |
| /* PLL_BYPASS controls the BYPASS bit in PLL_CTL 0 = do not bypass */ |
| /* 1 = bypass PLL */ |
| #define CONFIG_PLL_BYPASS 0 |
| /* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ |
| /* Values can range from 0-63 (where 0 means 64) */ |
| #define CONFIG_VCO_MULT 21 |
| /* CCLK_DIV controls the core clock divider */ |
| /* Values can be 1, 2, 4, or 8 ONLY */ |
| #define CONFIG_CCLK_DIV 1 |
| /* SCLK_DIV controls the system clock divider */ |
| /* Values can range from 1-15 */ |
| #define CONFIG_SCLK_DIV 4 |
| |
| |
| /* |
| * Memory Settings |
| */ |
| #define CONFIG_MEM_ADD_WDTH 10 |
| #define CONFIG_MEM_SIZE 64 |
| |
| #define CONFIG_EBIU_SDRRC_VAL 0x03F6 |
| #define CONFIG_EBIU_SDGCTL_VAL (SCTLE | CL_3 | PASR_ALL | TRAS_6 | TRP_3 | TRCD_3 | TWR_2 | PSS) |
| |
| #define CONFIG_EBIU_AMGCTL_VAL (AMCKEN | AMBEN_ALL) |
| #define CONFIG_EBIU_AMBCTL0_VAL (B1WAT_15 | B1RAT_15 | B1HT_3 | B1RDYPOL | B0WAT_15 | B0RAT_15 | B0HT_3 | B0RDYPOL) |
| #define CONFIG_EBIU_AMBCTL1_VAL (B3WAT_15 | B3RAT_15 | B3HT_3 | B3RDYPOL | B2WAT_15 | B2RAT_15 | B2HT_3 | B2RDYPOL) |
| |
| #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| #define CONFIG_SYS_MALLOC_LEN (640 * 1024) |
| |
| |
| /* |
| * NAND Settings |
| * (can't be used same time as ethernet) |
| */ |
| #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) |
| # define CONFIG_BFIN_NFC |
| # define CONFIG_BFIN_NFC_BOOTROM_ECC |
| #endif |
| #ifdef CONFIG_BFIN_NFC |
| #define CONFIG_BFIN_NFC_CTL_VAL 0x0033 |
| #define CONFIG_DRIVER_NAND_BFIN |
| #define CONFIG_SYS_NAND_BASE 0 /* not actually used */ |
| #define CONFIG_SYS_MAX_NAND_DEVICE 1 |
| #endif |
| |
| |
| /* |
| * Network Settings |
| */ |
| #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) && \ |
| !defined(__ADSPBF524__) && !defined(__ADSPBF525__) && !defined(CONFIG_BFIN_NFC) |
| #define ADI_CMDS_NETWORK 1 |
| #define CONFIG_BFIN_MAC |
| #define CONFIG_RMII |
| #define CONFIG_NETCONSOLE 1 |
| #endif |
| #define CONFIG_HOSTNAME bf527-ezkit |
| /* Uncomment next line to use fixed MAC address */ |
| /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ |
| #define CONFIG_LIB_RAND |
| |
| /* |
| * Flash Settings |
| */ |
| #define CONFIG_FLASH_CFI_DRIVER |
| #define CONFIG_SYS_FLASH_BASE 0x20000000 |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_SYS_FLASH_PROTECTION |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| #define CONFIG_SYS_MAX_FLASH_SECT 259 |
| |
| |
| /* |
| * SPI Settings |
| */ |
| #define CONFIG_BFIN_SPI |
| #define CONFIG_ENV_SPI_MAX_HZ 30000000 |
| #define CONFIG_SF_DEFAULT_SPEED 30000000 |
| #define CONFIG_SPI_FLASH |
| #define CONFIG_SPI_FLASH_STMICRO |
| |
| |
| /* |
| * Env Storage Settings |
| */ |
| #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) |
| #define CONFIG_ENV_IS_IN_SPI_FLASH |
| #define CONFIG_ENV_OFFSET 0x10000 |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_SECT_SIZE 0x10000 |
| #define CONFIG_ENV_IS_EMBEDDED_IN_LDR |
| #elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) |
| #define CONFIG_ENV_IS_IN_NAND |
| #define CONFIG_ENV_OFFSET 0x40000 |
| #define CONFIG_ENV_SIZE 0x20000 |
| #else |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_OFFSET 0x4000 |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) |
| #define CONFIG_ENV_SIZE 0x2000 |
| #define CONFIG_ENV_SECT_SIZE 0x2000 |
| #define CONFIG_ENV_IS_EMBEDDED_IN_LDR |
| #endif |
| |
| |
| /* |
| * I2C Settings |
| */ |
| #define CONFIG_BFIN_TWI_I2C 1 |
| #define CONFIG_HARD_I2C 1 |
| |
| |
| /* |
| * USB Settings |
| */ |
| #if !defined(__ADSPBF522__) && !defined(__ADSPBF523__) |
| #define CONFIG_USB |
| #define CONFIG_MUSB_HCD |
| #define CONFIG_USB_BLACKFIN |
| #define CONFIG_USB_STORAGE |
| #define CONFIG_MUSB_TIMEOUT 100000 |
| #endif |
| |
| /* Don't waste time transferring a logo over the UART */ |
| #if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART) |
| /*# define CONFIG_VIDEO*/ |
| #endif |
| |
| /* |
| * Video Settings |
| */ |
| #ifdef CONFIG_VIDEO |
| #ifdef CONFIG_BF527_EZKIT_REV_2_1 |
| # define CONFIG_LQ035Q1_SPI_BUS 0 |
| # define CONFIG_LQ035Q1_SPI_CS 7 |
| # define CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI |
| #else |
| # define CONFIG_LQ035Q1_USE_RGB888_8_BIT_PPI |
| #endif |
| |
| #ifdef CONFIG_LQ035Q1_USE_RGB565_8_BIT_PPI |
| # define EASYLOGO_HEADER <asm/bfin_logo_rgb565_230x230_lzma.h> |
| #else |
| # define EASYLOGO_HEADER <asm/bfin_logo_230x230_lzma.h> |
| #endif |
| #endif /* CONFIG_VIDEO */ |
| |
| /* |
| * Misc Settings |
| */ |
| #define CONFIG_MISC_INIT_R |
| #define CONFIG_RTC_BFIN |
| #define CONFIG_UART_CONSOLE 1 |
| #define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED |
| |
| /* |
| * Pull in common ADI header for remaining command/environment setup |
| */ |
| #include <configs/bfin_adi_common.h> |
| |
| #endif |