| // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause |
| /* |
| * Copyright (C) 2018, STMicroelectronics - All Rights Reserved |
| */ |
| |
| #include <common.h> |
| #include <clk.h> |
| #include <dm.h> |
| #include <ram.h> |
| #include <regmap.h> |
| #include <syscon.h> |
| #include <asm/io.h> |
| #include "stm32mp1_ddr.h" |
| |
| static const char *const clkname[] = { |
| "ddrc1", |
| "ddrc2", |
| "ddrcapb", |
| "ddrphycapb", |
| "ddrphyc" /* LAST clock => used for get_rate() */ |
| }; |
| |
| int stm32mp1_ddr_clk_enable(struct ddr_info *priv, uint32_t mem_speed) |
| { |
| unsigned long ddrphy_clk; |
| unsigned long ddr_clk; |
| struct clk clk; |
| int ret; |
| unsigned int idx; |
| |
| for (idx = 0; idx < ARRAY_SIZE(clkname); idx++) { |
| ret = clk_get_by_name(priv->dev, clkname[idx], &clk); |
| |
| if (!ret) |
| ret = clk_enable(&clk); |
| |
| if (ret) { |
| printf("error for %s : %d\n", clkname[idx], ret); |
| return ret; |
| } |
| } |
| |
| priv->clk = clk; |
| ddrphy_clk = clk_get_rate(&priv->clk); |
| |
| debug("DDR: mem_speed (%d kHz), RCC %d kHz\n", |
| mem_speed, (u32)(ddrphy_clk / 1000)); |
| /* max 10% frequency delta */ |
| ddr_clk = abs(ddrphy_clk - mem_speed * 1000); |
| if (ddr_clk > (mem_speed * 100)) { |
| pr_err("DDR expected freq %d kHz, current is %d kHz\n", |
| mem_speed, (u32)(ddrphy_clk / 1000)); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) |
| { |
| struct ddr_info *priv = dev_get_priv(dev); |
| int ret; |
| unsigned int idx; |
| struct clk axidcg; |
| struct stm32mp1_ddr_config config; |
| |
| #define PARAM(x, y) \ |
| { x,\ |
| offsetof(struct stm32mp1_ddr_config, y),\ |
| sizeof(config.y) / sizeof(u32)} |
| |
| #define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x) |
| #define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x) |
| |
| const struct { |
| const char *name; /* name in DT */ |
| const u32 offset; /* offset in config struct */ |
| const u32 size; /* size of parameters */ |
| } param[] = { |
| CTL_PARAM(reg), |
| CTL_PARAM(timing), |
| CTL_PARAM(map), |
| CTL_PARAM(perf), |
| PHY_PARAM(reg), |
| PHY_PARAM(timing), |
| PHY_PARAM(cal) |
| }; |
| |
| config.info.speed = dev_read_u32_default(dev, "st,mem-speed", 0); |
| config.info.size = dev_read_u32_default(dev, "st,mem-size", 0); |
| config.info.name = dev_read_string(dev, "st,mem-name"); |
| if (!config.info.name) { |
| debug("%s: no st,mem-name\n", __func__); |
| return -EINVAL; |
| } |
| printf("RAM: %s\n", config.info.name); |
| |
| for (idx = 0; idx < ARRAY_SIZE(param); idx++) { |
| ret = dev_read_u32_array(dev, param[idx].name, |
| (void *)((u32)&config + |
| param[idx].offset), |
| param[idx].size); |
| debug("%s: %s[0x%x] = %d\n", __func__, |
| param[idx].name, param[idx].size, ret); |
| if (ret) { |
| pr_err("%s: Cannot read %s, error=%d\n", |
| __func__, param[idx].name, ret); |
| return -EINVAL; |
| } |
| } |
| |
| ret = clk_get_by_name(dev, "axidcg", &axidcg); |
| if (ret) { |
| debug("%s: Cannot found axidcg\n", __func__); |
| return -EINVAL; |
| } |
| clk_disable(&axidcg); /* disable clock gating during init */ |
| |
| stm32mp1_ddr_init(priv, &config); |
| |
| clk_enable(&axidcg); /* enable clock gating */ |
| |
| /* check size */ |
| debug("%s : get_ram_size(%x, %x)\n", __func__, |
| (u32)priv->info.base, (u32)STM32_DDR_SIZE); |
| |
| priv->info.size = get_ram_size((long *)priv->info.base, |
| STM32_DDR_SIZE); |
| |
| debug("%s : %x\n", __func__, (u32)priv->info.size); |
| |
| /* check memory access for all memory */ |
| if (config.info.size != priv->info.size) { |
| printf("DDR invalid size : 0x%x, expected 0x%x\n", |
| priv->info.size, config.info.size); |
| return -EINVAL; |
| } |
| return 0; |
| } |
| |
| static int stm32mp1_ddr_probe(struct udevice *dev) |
| { |
| struct ddr_info *priv = dev_get_priv(dev); |
| struct regmap *map; |
| int ret; |
| |
| debug("STM32MP1 DDR probe\n"); |
| priv->dev = dev; |
| |
| ret = regmap_init_mem(dev_ofnode(dev), &map); |
| if (ret) |
| return ret; |
| |
| priv->ctl = regmap_get_range(map, 0); |
| priv->phy = regmap_get_range(map, 1); |
| |
| priv->rcc = STM32_RCC_BASE; |
| |
| priv->info.base = STM32_DDR_BASE; |
| |
| #if !defined(CONFIG_STM32MP1_TRUSTED) && \ |
| (!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)) |
| priv->info.size = 0; |
| return stm32mp1_ddr_setup(dev); |
| #else |
| priv->info.size = dev_read_u32_default(dev, "st,mem-size", 0); |
| return 0; |
| #endif |
| } |
| |
| static int stm32mp1_ddr_get_info(struct udevice *dev, struct ram_info *info) |
| { |
| struct ddr_info *priv = dev_get_priv(dev); |
| |
| *info = priv->info; |
| |
| return 0; |
| } |
| |
| static struct ram_ops stm32mp1_ddr_ops = { |
| .get_info = stm32mp1_ddr_get_info, |
| }; |
| |
| static const struct udevice_id stm32mp1_ddr_ids[] = { |
| { .compatible = "st,stm32mp1-ddr" }, |
| { } |
| }; |
| |
| U_BOOT_DRIVER(ddr_stm32mp1) = { |
| .name = "stm32mp1_ddr", |
| .id = UCLASS_RAM, |
| .of_match = stm32mp1_ddr_ids, |
| .ops = &stm32mp1_ddr_ops, |
| .probe = stm32mp1_ddr_probe, |
| .priv_auto_alloc_size = sizeof(struct ddr_info), |
| }; |